Re: [XFree86] problem with modelines

2004-02-12 Thread Thomas Winischhofer
Andreas van Leeuwen Flamino wrote:

On Wed, Feb 11, 2004 at 11:22:30AM -0800, Mark Vojkovich wrote the following (indented);

  We need to see the /var/log/XFree86.0.log file. 

			Mark.



I have attached it to this message.
You are using depth 8 for which there is no Display SubSection in the 
config file you sent previously.

(==) R128(0): Depth 8, (==) framebuffer bpp 8
(II) R128(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
Insert for example

	DefaultDepth 16

before the first Display subsection.

Thomas

--
Thomas Winischhofer
Vienna/Austria
thomas AT winischhofer DOT net  *** http://www.winischhofer.net/
twini AT xfree86 DOT org


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86


[XFree86] problem with modelines

2004-02-11 Thread Andreas van Leeuwen Flamino
Hello, 

After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
I have tried to correct this by entering the modes lines to my XF86Config. 
However, i still get 1920x1440. 


SubSection Display
Depth 15
EndSubSection
SubSection Display
Depth 16
Modes   1600x1200 1280x1024 800x600 640x480
EndSubSection
SubSection Display
Depth 24
Modes   1600x1200 1280x1024 800x600 640x480
EndSubSection
EndSection


Can anyone tell me what i have missed or give me a pointer to the documentation 
covering a solution for my problem?

Thanks in advance, 

Regards, 

Andrejas.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86


Re: [XFree86] problem with modelines

2004-02-11 Thread Thomas Winischhofer
Andreas van Leeuwen Flamino wrote:

Hello, 

After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
I have tried to correct this by entering the modes lines to my XF86Config. 
However, i still get 1920x1440. 


SubSection Display
Depth 15
EndSubSection
SubSection Display
Depth 16
Modes   1600x1200 1280x1024 800x600 640x480
EndSubSection
SubSection Display
Depth 24
Modes   1600x1200 1280x1024 800x600 640x480
EndSubSection
EndSection

Can anyone tell me what i have missed or give me a pointer to the documentation 
covering a solution for my problem?
Edit /etc/X11/XF86Config-4, not /etc/X11/XF86Config.

Thomas

--
Thomas Winischhofer
Vienna/Austria
thomas AT winischhofer DOT net  *** http://www.winischhofer.net/
twini AT xfree86 DOT org


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86


Re: [XFree86] problem with modelines

2004-02-11 Thread Andreas van Leeuwen Flamino
On Wed, Feb 11, 2004 at 12:38:18PM +0100, Thomas Winischhofer wrote the following 
(indented);

 
 Edit /etc/X11/XF86Config-4, not /etc/X11/XF86Config.



Sorry, that was an error, i did edit /etc/X11/XF86Config-4.
What occured to me though, was that xf86cfg wants to write the file to 
/usr/X11R6/lib/XF86Config. It fails to write to locations in other directories
if i supply another one.  So, i used xf86cfg to get create the 
/usr/X11R6/lib/XF86Config. When i restarted X, it seemed like the changes were
not having any effect. So, i copied /usr/X11R6/lib/XF86Config to 
/etc/X11/XF86Config-4, which atleast gave me a working X. 
The only problem now is that i can only get a 1920x1440 mode, which is too high.

Regards, 

Andrejas.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86


Re: [XFree86] problem with modelines

2004-02-11 Thread Mark Vojkovich
   We need to see the /var/log/XFree86.0.log file. 


Mark.

On Wed, 11 Feb 2004, Andreas van Leeuwen Flamino wrote:

 Hello, 
 
 After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
 I have tried to correct this by entering the modes lines to my XF86Config. 
 However, i still get 1920x1440. 
 
 
   SubSection Display
   Depth 15
   EndSubSection
   SubSection Display
   Depth 16
   Modes   1600x1200 1280x1024 800x600 640x480
   EndSubSection
   SubSection Display
   Depth 24
   Modes   1600x1200 1280x1024 800x600 640x480
   EndSubSection
 EndSection
 
 
 Can anyone tell me what i have missed or give me a pointer to the documentation 
 covering a solution for my problem?
 
 Thanks in advance, 
 
 Regards, 
 
 Andrejas.
 ___
 XFree86 mailing list
 [EMAIL PROTECTED]
 http://XFree86.Org/mailman/listinfo/xfree86
 

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86


Re: [XFree86] problem with modelines

2004-02-11 Thread Andreas van Leeuwen Flamino
On Wed, Feb 11, 2004 at 11:22:30AM -0800, Mark Vojkovich wrote the following 
(indented);
We need to see the /var/log/XFree86.0.log file. 
 
 
   Mark.
 

I have attached it to this message.

Regards, 

Andreas.

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-8um i686 [ELF] 
Module Loader present
(==) Log file: /var/log/XFree86.0.log, Time: Wed Feb 11 12:12:23 2004
(==) Using config file: /etc/X11/XF86Config-4
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout XFree86 Configured
(**) |--Screen Screen0 (0)
(**) |   |--Monitor Monitor0
(**) |   |--Device Card0
(**) |--Input Device Mouse0
(**) |--Input Device Keyboard0
(==) Keyboard: CustomKeycode disabled
(WW) The directory /usr/X11R6/lib/X11/fonts/CID/ does not exist.
Entry deleted from font path.
(**) FontPath set to 
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/
(**) RgbPath set to /usr/X11R6/lib/X11/rgb
(**) ModulePath set to /usr/X11R6/lib/modules
(++) using VT number 7

(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: bitmap
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=The XFree86 Project
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: pcidata
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=The XFree86 Project
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card , rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106, rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card , rev 40 class 06,80,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 1106,3058 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:0a:0: chip 1113,1211 card 1113,9211 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5246 card 1002,0008 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: scanpci
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor=The XFree86 Project
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: scanpci
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 00x - 0x (0x1) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 00x - 0x (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 00x - 0x (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 00xc000 - 0xc0ff (0x100) IX[B]
[1] -1 00xc400 - 0xc4ff (0x100) IX[B]
[2] -1 00xc800 - 0xc8ff (0x100) IX[B]
[3] -1 00xcc00 - 0xccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 00xd800 - 0xd9ff (0x200) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 00xd400 - 0xd7ff (0x400) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08