Re: [yocto] Change initscript level

[Anuj Mittal]

On 01/11/2018 03:49 AM, Bishop, Mark (STRT) wrote:
> I am just trying to change modutils.sh to run from
> /etc/rcS.d/S05modutils.sh to /etc/rcS.d/S15modutils.sh
> 
>  
> 
> I can’t figure this out.  I have modified the
> yocto/source/arm/layers/core/meta/recipes-kernel/modutils-initscripts.bb
> 
>  
> 
> From: INITSCRIPT_PARAMS = "start 05 S ."
> 
> To: INITSCRIPT_PARAMS = "start 10 S ."
> 
>  
> 
> And I still only have S05modutils.sh
> 
> 
> The pkg_postinst_modutils-initscripts still has “start 05 S .” in
> build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/modutils-initscripts/1.0-r7/pkgdata/runtime/modutils-initscripts

I tried this and I can see the correct values. Which version of
poky/OE-core are you using? Can you try to bitbake -c cleansstate and
build modutils-initscripts again?

> 
>  
> 
> It’s quite apparent that I don’t know what I’m doing here and I could
> use some sage advice on how to move these startup levels around. 
> 
>  
> 
> Thank you.
> 
>  
> 
> *Mark Bishop*
> 
> *Sr. Firmware/Software Engineer – Microwave Subsystems***
> 
> * *
> 
> cid:image001.png@01D281ED.A45F0A90**
> 
> 4726 Eisenhower Blvd.
> 
> Tampa, FL 33634
> 
> USA
> 
>   
> 
>  
> 
> T  +1 813 901 7293
> 
> *mbis...@smithsinterconnectinc.com
> *
> 
>   
> 
> *smithsinterconnect.com* 
> 
> *TRAK MICROWAVE IS NOW SMITHS INTERCONNECT!***
> 
>  
> 
>  
> 
> 
> This e-mail contains proprietary information some or all of which may be
> legally privileged. It is intended for the recipient only. If an
> addressing or transmission error has misdirected this e-mail, please
> notify the authority by replying to this e-mail. If you are not the
> intended recipient you must not use, disclose, distribute, copy, print,
> or rely on this e-mail. In addition, information contained in or
> attached to this e-mail may be subject to either 22 C.F.R. Parts
> 120?130, or 15 C.F.R. Parts 730-774. These regulations prohibit the
> release or disclosure of certain information contained herein to anyone
> who is not a U.S. citizen or permanent resident alien, without a license
> first having been issued. Failure to observe such requirements is a
> violation of U.S. law that carries serious penalties.   ­­  
> 
> 

-- 
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

[yocto] Change initscript level

[Bishop, Mark (STRT)]

I am just trying to change modutils.sh to run from /etc/rcS.d/S05modutils.sh to 
/etc/rcS.d/S15modutils.sh

I can't figure this out.  I have modified the 
yocto/source/arm/layers/core/meta/recipes-kernel/modutils-initscripts.bb

From: INITSCRIPT_PARAMS = "start 05 S ."
To: INITSCRIPT_PARAMS = "start 10 S ."

And I still only have S05modutils.sh

The pkg_postinst_modutils-initscripts still has "start 05 S ." in 
build/tmp/work/cortexa9hf-neon-xilinx-linux-gnueabi/modutils-initscripts/1.0-r7/pkgdata/runtime/modutils-initscripts

It's quite apparent that I don't know what I'm doing here and I could use some 
sage advice on how to move these startup levels around.

Thank you.

Mark Bishop
Sr. Firmware/Software Engineer - Microwave Subsystems

[cid:image001.png@01D281ED.A45F0A90]

4726 Eisenhower Blvd.
Tampa, FL 33634
USA


T  +1 813 901 7293

mbis...@smithsinterconnectinc.com

smithsinterconnect.com

TRAK MICROWAVE IS NOW SMITHS INTERCONNECT!





-- 
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto