Re: [yocto] Problems building yocto for Xilinx ML507 (with some tentative fixes)
Updates 1) I was wrong with git.xilinx.com and git.denx.de not working ... it's just a HUGE download that took forever ... I have reverted my changes 2) I have been able to compile u-boot-xilinx (after some trial-error to generate the proper xparameters.h with XPS/XSDK, e.g. the FLASH memory is required) A small fix was needed to complete u-boot-xilinx compilation ... I had to add #include "xparameters.h" to the file board/xilinx/ppc440-generic/xilinx_ppc440_generic.c 3) I have been able to compile linux-xilinx, but first I had to copy the file defconfig as linux-xilinx/3.3-r02/git/.config Now core-image-minimal is done and I am going to try it (as soon I find how to build the ace) All the best AndreaS On Fri 10 May 2013 08:45:33 PM CEST, Andrea Sterbini wrote: Found why that error | /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory The u-boot downloaded from github.com/Xilinx has no board/xilinx/ml507/ directory but only a board/xilinx/ppc440-generic Now I will try the original from git://git.denx.de/u-boot.git (but bitbake seems to have problems fetching it) A On Fri 10 May 2013 07:51:11 PM CEST, Andrea Sterbini wrote: Not yet. I haven't been able to complete the complete run bitbake core-image-minimal I moved to the meta-xilinx master branch I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes) bitbake core-image-minimal -k The error I get is Build Configuration: BB_VERSION= "1.19.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Fedora-18" TARGET_SYS= "powerpc-poky-linux" MACHINE = "virtex-5-ml507-powerpc-440" DISTRO= "poky" DISTRO_VERSION= "1.3+snapshot-20130510" TUNE_FEATURES = "m32 ppc440 fpu-soft" TARGET_FPU= "soft" meta meta-yocto meta-yocto-bsp= "master:88a7b041fbf2583472aa9408a33dd8881223a0c1" toolchain-layer = "master:cc0067dc0c7ea469057238db6422864d1bce311c" toolchain-layer = "master:cd5f284730a6430d563443786c409aa6783d4b04" meta-xilinx = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff" meta-angstrom = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18" --- a lot of diagnostic messages later ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function do_configure | NOTE: Replacing xparameters header to match hardware model | /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory | ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Task 79 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure) failed with exit code '1' ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd | scripts/kconfig/conf --silentoldconfig Kconfig | *** | *** Configuration file ".config" not found! | *** | *** Please run some configurator (e.g. "make oldconfig" or | *** "make menuconfig" or "make xconfig"). | *** | make[2]: *** [silentoldconfig] Error 1 | make[1]: *** [silentoldconfig] Error 2 | make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop. | make: *** Waiting for unfinished jobs | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Task 811 (/home/andrea/src/FPGA/poky/meta-xilinx/reci
Re: [yocto] Problems building yocto for Xilinx ML507 (with some tentative fixes)
Found why that error | /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory The u-boot downloaded from github.com/Xilinx has no board/xilinx/ml507/ directory but only a board/xilinx/ppc440-generic Now I will try the original from git://git.denx.de/u-boot.git (but bitbake seems to have problems fetching it) A On Fri 10 May 2013 07:51:11 PM CEST, Andrea Sterbini wrote: Not yet. I haven't been able to complete the complete run bitbake core-image-minimal I moved to the meta-xilinx master branch I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes) bitbake core-image-minimal -k The error I get is Build Configuration: BB_VERSION= "1.19.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Fedora-18" TARGET_SYS= "powerpc-poky-linux" MACHINE = "virtex-5-ml507-powerpc-440" DISTRO= "poky" DISTRO_VERSION= "1.3+snapshot-20130510" TUNE_FEATURES = "m32 ppc440 fpu-soft" TARGET_FPU= "soft" meta meta-yocto meta-yocto-bsp= "master:88a7b041fbf2583472aa9408a33dd8881223a0c1" toolchain-layer = "master:cc0067dc0c7ea469057238db6422864d1bce311c" toolchain-layer = "master:cd5f284730a6430d563443786c409aa6783d4b04" meta-xilinx = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff" meta-angstrom = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18" --- a lot of diagnostic messages later ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function do_configure | NOTE: Replacing xparameters header to match hardware model | /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory | ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Task 79 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure) failed with exit code '1' ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd | scripts/kconfig/conf --silentoldconfig Kconfig | *** | *** Configuration file ".config" not found! | *** | *** Please run some configurator (e.g. "make oldconfig" or | *** "make menuconfig" or "make xconfig"). | *** | make[2]: *** [silentoldconfig] Error 1 | make[1]: *** [silentoldconfig] Error 2 | make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop. | make: *** Waiting for unfinished jobs | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Task 811 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need to be rerun and 2 failed. Waiting for 0 running tasks to finish: Summary: 2 tasks failed: /home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile Summary: There were 2 ERROR messages shown, returning a non-zero exit code. All the best Andrea On Fri 10 May 2013 05:11:48 PM CEST, Elvis Dowson wrote: Hi Andrea, On May 10, 2013, at 6:02 PM, Andrea Sterbini wrote: The problems I have found (and someway fixed) are: 1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not ab
Re: [yocto] Problems building yocto for Xilinx ML507 (with some tentative fixes)
Not yet. I haven't been able to complete the complete run bitbake core-image-minimal I moved to the meta-xilinx master branch I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes) bitbake core-image-minimal -k The error I get is Build Configuration: BB_VERSION= "1.19.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Fedora-18" TARGET_SYS= "powerpc-poky-linux" MACHINE = "virtex-5-ml507-powerpc-440" DISTRO= "poky" DISTRO_VERSION= "1.3+snapshot-20130510" TUNE_FEATURES = "m32 ppc440 fpu-soft" TARGET_FPU= "soft" meta meta-yocto meta-yocto-bsp= "master:88a7b041fbf2583472aa9408a33dd8881223a0c1" toolchain-layer = "master:cc0067dc0c7ea469057238db6422864d1bce311c" toolchain-layer = "master:cd5f284730a6430d563443786c409aa6783d4b04" meta-xilinx = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff" meta-angstrom = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18" --- a lot of diagnostic messages later ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function do_configure | NOTE: Replacing xparameters header to match hardware model | /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory | ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information) ERROR: Task 79 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure) failed with exit code '1' ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd | scripts/kconfig/conf --silentoldconfig Kconfig | *** | *** Configuration file ".config" not found! | *** | *** Please run some configurator (e.g. "make oldconfig" or | *** "make menuconfig" or "make xconfig"). | *** | make[2]: *** [silentoldconfig] Error 1 | make[1]: *** [silentoldconfig] Error 2 | make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop. | make: *** Waiting for unfinished jobs | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information) ERROR: Task 811 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need to be rerun and 2 failed. Waiting for 0 running tasks to finish: Summary: 2 tasks failed: /home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile Summary: There were 2 ERROR messages shown, returning a non-zero exit code. All the best Andrea On Fri 10 May 2013 05:11:48 PM CEST, Elvis Dowson wrote: Hi Andrea, On May 10, 2013, at 6:02 PM, Andrea Sterbini wrote: The problems I have found (and someway fixed) are: 1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU Fix: I have changed the ml507 rules to include just the soft FPU I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4. hard float fpu support worked with gcc-4.7. Were you able to boot and login to the command prompt with the generated images ? Best regards, Elvis Dowson ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Problems building yocto for Xilinx ML507 (with some tentative fixes)
Hi Andrea, On May 10, 2013, at 6:02 PM, Andrea Sterbini wrote: > The problems I have found (and someway fixed) are: > > 1) when I do "bitbake meta-toolchain" I get an error complaining that the > compiler is not able to build for powerpc with FPU > Fix: I have changed the ml507 rules to include just the soft FPU I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4. hard float fpu support worked with gcc-4.7. Were you able to boot and login to the command prompt with the generated images ? Best regards, Elvis Dowson ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Problems building yocto for Xilinx ML507 (with some tentative fixes)
Hi
I have just bought an old Xilinx ML507 and I am trying to build yocto,
but I find some problems building the minimal image
I am a yocto newbie ... thus I wonder if I am missing something important.
My setup: Linux Fedora 18 64 bits
I hope I am following the correct procedure:
git clone git://git.yoctoproject.org/poky
cd poky
git clone git://git.yoctoproject.org/meta-xilinx -b
master-xilinx-ml507-gcc-4.7 meta-xilinx
git clone git://git.openembedded.org/meta-openembedded
. oe-init-build-env
My bblayers contains
BBLAYERS ?= " \
/home/andrea/src/FPGA/poky/meta \
/home/andrea/src/FPGA/poky/meta-yocto \
/home/andrea/src/FPGA/poky/meta-yocto-bsp \
/home/andrea/src/FPGA/poky/meta-openembedded/toolchain-layer \
/home/andrea/src/FPGA/poky/meta-openembedded-contrib/toolchain-layer \
/home/andrea/src/FPGA/poky/meta-xilinx \
/home/andrea/src/FPGA/poky/meta-angstrom \
"
My local.conf contains
BB_NUMBER_THREADS = "4"
PARALLEL_MAKE = "-j 4"
XILINX_LOC ?= "/opt/Xilinx/13.3/ISE_DS"
MACHINE ?= "virtex-5-ml507-powerpc-440"
XILINX_BSP_PATH ?= "/home/andrea/src/FPGA/poky-ml507/xilinx-ml507-updated"
XILINX_BOARD ?= "ml507"
INHERIT += "rm_work"
PREFERRED_VERSION_libffi = "3.0.13"
PREFERRED_VERSION_libffi-native = "3.0.13"
MACHINE ??= "qemux86"
DISTRO ?= "poky"
PACKAGE_CLASSES ?= "package_rpm"
EXTRA_IMAGE_FEATURES = "debug-tweaks"
USER_CLASSES ?= "buildstats image-mklibs image-prelink"
PATCHRESOLVE = "noop"
BB_DISKMON_DIRS = "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
ABORT,${TMPDIR},100M,1K \
ABORT,${DL_DIR},100M,1K \
ABORT,${SSTATE_DIR},100M,1K"
CONF_VERSION = "1"
The problems I have found (and someway fixed) are:
1) when I do "bitbake meta-toolchain" I get an error complaining that
the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU
diff --git a/conf/machine/virtex-5-ml507-powerpc-440.conf
b/conf/machine/virtex-5-ml507-powerpc-440.conf
index d44fc87..d268919 100644
--- a/conf/machine/virtex-5-ml507-powerpc-440.conf
+++ b/conf/machine/virtex-5-ml507-powerpc-440.conf
@@ -5,7 +5,8 @@
#@DESCRIPTION: Machine configuration for the Xilinx ML507 FPGA
development platform with a Virtex-5 PowerPC 440 processor (with APU FPU).
include conf/machine/include/virtex-5/virtex-5-base.inc
-include conf/machine/include/tune-ppc440e.inc
+#AS include conf/machine/include/tune-ppc440e.inc
+include conf/machine/include/tune-ppc440.inc
# Specify linux kernel devicetree
KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/virtex440-ml507.dts"
2) the libffi library version "3.0.12" has a small bug (a misplaced
#ifndef), which is fixed in version "3.0.13"
Fix: I have added to my local.conf
PREFERRED_VERSION_libffi = "3.0.13"
PREFERRED_VERSION_libffi-native = "3.0.13"
This way the toolchain compiles properly
When I try "bitbake core-image-minimal" I get 2 problems:
1) the Xilinx git repository has moved from git.xilinx.com to
github.com/Xilinx
Fix: I have changed the links in u-boot and linux-xilinx
--- a/recipes-bsp/u-boot/u-boot-xilinx_2012.10.bb
+++ b/recipes-bsp/u-boot/u-boot-xilinx_2012.10.bb
@@ -12,7 +12,7 @@ PR = "r01"
# U-Boot source location
KBRANCH = "master"
-SRC_URI =
"git://git.xilinx.com/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"
+SRC_URI =
"git://github.com/Xilinx/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"
S = "${WORKDIR}/git"
diff --git a/recipes-kernel/linux/linux-xilinx_3.3.bb
b/recipes-kernel/linux/linux-xilinx_3.3.bb
index d803676..76c1edd 100644
--- a/recipes-kernel/linux/linux-xilinx_3.3.bb
+++ b/recipes-kernel/linux/linux-xilinx_3.3.bb
@@ -18,7 +18,7 @@ SRCREV = "1e92da8e3a66b051766b1be57be67e2bff11e19d"
PR = "r02"
KBRANCH = "master"
-SRC_URI =
"git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+SRC_URI =
"git://github.com/Xilinx/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
file://0001-Xilinx-Update-IP-Core-support-for-Xilinx-ISE-14.1.patch \
file://0002-virtex440-ml507.dts-Update-device-tree-file-using-Xi.patch \
file://0003-xilinxfb-Fix-regression-in-call-to-XPS-TFT-controlle.patch \
diff --git a/recipes-kernel/linux/linux-xilinx_3.6.bb
b/recipes-kernel/linux/linux-xilinx_3.6.bb
index 5d529a6..b7d2904 100644
--- a/recipes-kernel/linux/linux-xilinx_3.6.bb
+++ b/recipes-kernel/linux/linux-xilinx_3.6.bb
@@ -17,7 +17,7 @@ SRCREV = "04d9378881401e71f83b8b4fea0abd71d33b4052"
PR = "r02"
KBRANCH = "master"
-SRC_URI =
"git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+SRC_URI =
"git://github.com/Xilinx/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
file://defconfig \
"
# Apply machine specific patches.
diff --git a/recipes-kernel/linux/linux-xilinx_git.bb
b/recipes-kernel/linux/linux-xilinx_git.bb
index 1800183..32351f7 100644
--- a/recipes-kernel/linux/linux-xilinx_git.bb
+++ b/recipes-kernel/linux/linux-xilinx_git.bb
@@ -18,
