I too have US tables that I would like to use in Europe. Some of the
tables on the US market, like mine, do not have the switch for 110 /
220 V. Mine are explicitly marked for 110 V and 60 Hz only.
Getting a converter for the voltage is no problem, but I haven't yet
been able to confirm
not sure how useful this may be, i found a copy of the 1200 MkII service
manual online a while ago when considering a bit of diy on one of my
turntables.
link to download at the bottome of this page:
http://www.backspin.org/service.html (its about 13MB)
cheers
dang
--
http://www.fastmail.fm -
hey dennis, probably nto gonna be easy.
you can get a step up tranformer from radio shack though, and it will handle
the conversion for you
- Original Message -
From: Dennis DeSantis [EMAIL PROTECTED]
To: 313@hyperreal.org
Sent: Tuesday, July 22, 2003 5:04 PM
Subject: (313) Technics
the type of plug :)
Dennis
-Original Message-
From: ::P [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 22, 2003 5:16 PM
To: Dennis DeSantis; 313@hyperreal.org
Subject: Re: (313) Technics 1200s question
hey dennis, probably nto gonna be easy.
you can get a step up tranformer from radio shack
I think you can buy that power source part along with voltage selector at
www.1200s.com (in the electrical parts). You can practically build your
own table from this site.
rh
[EMAIL PROTECTED]; 313@hyperreal.org
Sent: Tuesday, July 22, 2003 5:25 PM
Subject: RE: (313) Technics 1200s question
That's not entirely true. I used to own a pair of Technics 1200s that
were
brought over from Germany, and the PSU on that model could handle
110v-120v
220v-240v and 50hz-60hz