V17R4 won’t launch either. prntvpt.dll missing and a bunch of other stuff.
Any help?
Cheers,
Peter Adam
Adam, Zievert & Associates P/L
e: peter.a...@me.com
Skype Phone: +61 3 9016 379
t: +61 3 9836 3539
m: 0419 552 462
www.adamzievert.com.au
> On 17 May 2019, at 9:06 am, Peter Adam via
Thank you Miyako!
I changed the compatibility setting, but that didn’t help for this.
I then traced and found, as you suspected, that the variable was text. Makes
sense, as it’s a enterable box. Declaring it properly fixed the issue.
Thanks!
Sannyasin Siddhanathaswami
On May 15, 2019, 7:13 PM
Jeffrey Kain via 4D_Tech wrote:
>Not sure if you're on 32-bit or 64-bit, but printing on 64-bit is
>fussier -- it wants to have paper sizes assigned with SET PRINT OPTION
>that match exactly the printer you're printing to, otherwise it sets OK
>to zero and it won't print. The workaround I found,
Not sure if you're on 32-bit or 64-bit, but printing on 64-bit is fussier -- it
wants to have paper sizes assigned with SET PRINT OPTION that match exactly the
printer you're printing to, otherwise it sets OK to zero and it won't print.
The workaround I found, since different drivers have
I'll give that a shot. I print the file with no extension then rename it
afterwards.
Thanks!
--
--
Tom Dillon 375 S Main St #405
DataCraft
On May 17, 2019, at 19:58, Tom Dillon via 4D_Tech <4d_tech@lists.4d.com> wrote:
>
> 4D 17.1
>
> SET PRINT OPTION(Destination option;3;$DocPath) // PDF
>
> $DocPath is validated
>
> Prints to a PDF on my iMac (10.13.6). On a client's Macbook Air (10.14.4) it
> creates no document and ends up
4D 17.1
SET PRINT OPTION(Destination option;3;$DocPath) // PDF
$DocPath is validated
Prints to a PDF on my iMac (10.13.6). On a client's Macbook Air (10.14.4) it
creates no document and ends up printing on the default printer.
Any ideas on why this computer wants to make me sad?
BTW, the DB
Not to get too off point, but if a field is dragged into the Label form and
changed to a 4D command, the command gets executed...at least the ones I tried
I got "ALERT"ed once for each record in the selection. After that the label
printed with: ALERT("Test") on each label. BEEP worked the
Probably what's on this list:
https://doc.4d.com/4Dv17R4/4D/17-R4/4D-Write-Pro-Attributes.300-403.en.html
PB
On Fri, 17 May 2019 at 14:25, Jeremy French via 4D_Tech <
4d_tech@lists.4d.com> wrote:
> Can I change a 4D Write Pro table’s id attribute to some custom value?
>
> A recent 4D Tech
Can I change a 4D Write Pro table’s id attribute to some custom value?
A recent 4D Tech Tip "Write Pro Object Attributes" says:
"With a 4D Write Pro object custom attributes and values can be assigned to the
4D Write Pro object as long as the attribute is not a reserved attribute.”
Where do we
10 matches
Mail list logo