Re: 4D Write Pro Interface component v16R6

So much stuff to try and remember. Like Jody said…now I just have to remember _this_ link for the next time! Randy -- Randy Jaynes Senior Programmer and Customer Support http://printpoint.com •

Re: 4D Write Pro Interface component v16R6

Randy, I encountered the same problem but then remembered 4D's caveat about widgets... they only will initialize properly on pages 0 and 1. This is documented here among other places. http://doc.4d.com/4Dv16R6/4D/16-R6/4D-Widget-components.300-3713598.en.html Regards, Scott Wirth -- Sent

Re: 4D Write Pro Interface component v16R6

the future. > > I just finished spending a few hours trying to figure out why the widget in > the ‘4D Write Pro Interface’ component embedded in v16R6 (and some earlier > versions of v16) wouldn’t work in my database, I finally tracked it down. > > The widget that includes bo

Re: 4D Write Pro Interface component v16R6

finished spending a few hours trying to figure out why the widget in > the ‘4D Write Pro Interface’ component embedded in v16R6 (and some earlier > versions of v16) wouldn’t work in my database, I finally tracked it down. > > The widget that includes both a WPArea and accompany

4D Write Pro Interface component v16R6

Just a word of warning to prevent headaches for anyone else in the future. I just finished spending a few hours trying to figure out why the widget in the ‘4D Write Pro Interface’ component embedded in v16R6 (and some earlier versions of v16) wouldn’t work in my database, I finally tracked

Re: 4D Write Pro Interface component

Hey John, > When I open my database with the component in the component folder, I cannot > see any of the component methods or forms I don’t think you will as they are like a widget. I haven;t explored enough yet (I plan to next week) to see how it sets things. But since it’s set up as a

Re: 4D Write Pro Interface component

Yes but the ruler is an R feature. You won't see that in a dot release until 17 dot 0 Wayne On Tue, 9 May 2017 at 13:01, John Baughman via 4D_Tech <4d_tech@lists.4d.com> wrote: > That’s interesting. I am running v16.1 and it is not in the Property List > as depicted in the blog post. Did it

Re: 4D Write Pro Interface component

That’s interesting. I am running v16.1 and it is not in the Property List as depicted in the blog post. Did it not make the cut for v16.1? I am assuming the 16.1 is a later release than 16R2. John > On May 8, 2017, at 4:28 PM, Keisuke Miyako via 4D_Tech <4d_tech@lists.4d.com> > wrote: > >

Re: 4D Write Pro Interface component

the 4D Write Pro feature "horizontal ruler" was added in 16R2 http://blog.4d.com/4d-write-pro-horizontal-ruler/ > Anyone know how to get that ruler to show? ** 4D Internet Users Group (4D iNUG) FAQ:

Re: 4D Write Pro Interface component

se you can download. My assumption (unproven >> as I am looking for the same insight) and found this v16 HDI example. >> >> http://blog.4d.com/create-your-own-interface-for-4d-write-pro/ >> >> And I’m sure then it might make sense of how to use the component. >>

Re: 4D Write Pro Interface component

found this v16 HDI example. > > http://blog.4d.com/create-your-own-interface-for-4d-write-pro/ > > And I’m sure then it might make sense of how to use the component. > > Hope that helps, > John… > >> Can someone point me to instructions on how

Re: 4D Write Pro Interface component

/ And I’m sure then it might make sense of how to use the component. Hope that helps, John… > Can someone point me to instructions on how to use the 4D Write Pro Interface > component. ** 4D Internet Users Group (4D iNUG) FAQ:

Re: 4D Write Pro Interface component

> Can someone point me to instructions on how to use the 4D Write Pro Interface > component. some reading <http://.mettre.de/wp/the-real-estate-blues/#english?inug> Regards O r t w i n Z i l l g e n - <mailto:i...@met

4D Write Pro Interface component

Can someone point me to instructions on how to use the 4D Write Pro Interface component. Thanks, John ** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html