> I tried setting mem, bcmem, and icmem all to 1M but no improvement.
> They are not set by default, and trying the configuration shown in the
> man page actually prevents the system from booting (out of memory).
>
> John
perhaps i'm pointing out the obvious. have you tried something as simple
a
> this is fine for most calls, however rfork() explicitly sets up->nerrlab
> to zero rather than copying it and memmove()ing up->errlab from the parent
> proc to the child:
>
>/sys/src/9/port/sysproc.c:90
>
> Surely this means that rfork will always fail with a "bad errstack [19]: -1
> e
I have found another piece of code I don't understand in the kernel.
syscalls are all fed through a single trap, and the common code which
processes them performs a waserror():
/sys/src/9/pc/trap.c:694
A few lines down this function (after the system call has been
executed up->nerrlab i
hola,
if you accept the license
http://plan9.bell-labs.com/plan9/license.html
you can fetch it from URJC's site
http://plan9.escet.urjc.es/plan9jun.tgz
On Tue, Aug 12, 2008 at 5:46 PM, Michaelian Ennis
<[EMAIL PROTECTED]> wrote:
> I am reading Nemo's "Notes on the Plan 9 3rd edition Kernel Sourc
>From the wiki page: http://netlib.bell-labs.com/wiki/plan9/papers/
You can obtain the sources documented in this book from:
http://plan9.escet.urjc.es/plan9jun.tgz
-Original Message-
From: [EMAIL PROTECTED] on behalf of Michaelian Ennis
Sent: Tue 8/12/2008 1:46 PM
To: 9fans@9fans.net
S
I am reading Nemo's "Notes on the Plan 9 3rd edition Kernel Source".
Is it reasonable to grab a snapshot from sourcesdump or is there a
better way? Perhaps a tarball tucked away somewhere? Also if pulling
it is reccomended then what date should I be looking at from sources?
Ian
> I've just installed Plan 9 on a new terminal that will soon become my
> new auth/cpu/file server. It's a [EMAIL PROTECTED], 128MB of RAM, and a 500GB
> hard drive. I made a 10GB fossil and gave the rest to venti. When I
> boot, I find that pretty much all of the 128 megs is being used, and
> o
