On Tue, Aug 23, 2016 at 12:52:59PM -0700, Kurt H Maier wrote:
On Tue, Aug 23, 2016 at 12:05:10AM -0700, David Walther wrote:
Then the whiskey wore off.
[citation needed]
http://www.ulisp.com/
http://flashforth.com/
Years ago I've successfully used multicast for a project.
The project has been aborted just after the test of the multicast.
Probably I've that (sparse pieces of) sw ... somewhere.
I remember that I wrote them with no problems following the Plan9 man.
I also remember successfully tests of one2ma
Cirno, ix IV : dr No, Jason born.
IP multi under res, Mira Au
Andromeda's thoughts of Perseus codes my system, and you don't got it.
On Sep 15, 2016 12:44 PM, "Adriano Verardo" wrote:
>
> Years ago I've successfully used multicast for a project.
> The project has been aborted just after the test
> On Aug 30, 2016, at 10:11 PM, Winston Kodogo wrote:
>
> And, on a related note:
>
> https://www.jwz.org/blog/2012/04/why-i-use-safari-instead-of-firefox/
>
> consistency across apps
Press escape in iTunes. Press escape in DVD player. :-(
V/r,
Bryan
Sent from my iPhone
Thank you Alex,
I will give these a try tonight. I'm happy to hear that multicast can work and
it's likely just some silly mistake on my end.
Chris
> On Sep 15, 2016, at 12:23 AM, Alex Musolino wrote:
>
> I was playing around with multicast on 9front the other week and
> managed to get someth
Hi Alex,
I tried the mcastsend and mcastrecv on my two raspberry Pi's running 9front.
I'm seeing similar routes as in my own experiment without the interface
number, tagged as 4m for IPv4 multicast. I can ping each device from the other
using their unicast addresses.
Unfortunately, it doesn't
>
> Do you remember if you needed to add/remove routes to make it work? Also,
> did you use 9front or the bell labs distribution?
>
These programs work without any setup on 9front. Once the programs are
running I can ping the multicast address from either host and a new route
appears in /net/iprou
>
> I tried the mcastsend and mcastrecv on my two raspberry Pi's running
> 9front.
>
How are you connecting these devices to the network? I use wired
connections to a single (dumb) switch.
--
Cheers,
Alex Musolino
