Hello,
please be carefull, we are getting virus on our dear list !! Glad to have
good anti-virus here by Nestle !
Ren Lambelet
Nestec S.A. / Informatique du Centre
55, av. Nestl CH-1800 Vevey (Switzerland)
*+41'21'924'35'43 7+41'21'924'28'88 * K4-117
email [EMAIL PROTECTED]
Visit our site:
On Tuesday 13 February 2001 08:27, you wrote:
Hi All
I have a case in adsm 3.7
the following messages has been reported in the activity log of our adsm
server ANR8302E I/O error on drive DRIVE2 (/dev/rmt2) (OP=READ,
CC=0, KEY=03, ASC=11, ASCQ=00,
VERY IMPORTANT INFORMATION *
FYI :
The current threat manifests itself in these three ways:
Subject line: Here you have, ;0)
Body text:Hi:
Check This!
Attachment: AnnaKournikova.jpg.vbs
(although not all users will
Folks,
we just migrated from ADSM 3.1 to TSM 4.1 on AIX 4.3.3. Now we would use the new
feature image backup.
We backed up a test filesystem on one of our AIX clients which worked fine. Then
wie tried to
backup image a file system of a Solaris box which brought a message like _file
system is
Hi *SM'ers,
TSM 3.7 Level 3.0 on OS390R8
Last week I made a upgrade from ADSM 3.1 to TSM 3.7
Today I tried to increase the Recoverylog.
Allocation of space for Recovery Log on OS390 run without failure.
The define of the dbvolume run without failure too.
But the query db and query logvolume
KEY=03 ASC=11, ASCQ=00 indicate a read error on the tape. Recently I had a client
that was experiencing this on a 3575 library after having the library upgraded for
the higher capacity tapes. The cause was a bug in the microcode. A fix to the
microcode helped.
Saad Al-Sakran wrote:
Hi All
Hi Saad, last time I remember having a error like that was a bad
SCSI cable.
If you have the manual of your tape library look for the meaning of
each code.
Such as, CC, KEY, ASC, ASCQ and SENSE. Hope this helps.
Gilbert C. Serein
[EMAIL PROTECTED]
Hello everyone:
Has anybody had any experience with the Kernel Group's BMR software? Any
thoughts and/or comments would be appreciated.
Thanks,
Arthur.
---
The information contained in this e-mail message, and any attachment thereto, is
confidential and
Hello,
How big is your recovery log currently?
Have you reached the max recovery log size? the max you can have is 5420 mb.
Thanks,
Kuli Toora
Npower
Enterprise Services
Kingswinford
01384 275346
Mobile : 07989 492903
mailto:[EMAIL PROTECTED]
-Original Message-
From: Wolfgang
One other thought is to do a q req and see if any requests outstanding.
If not then my final suggestion then is to HALT *SM and restart as this will clear any
hung condition. I have done this several times with a tape that's tied up or a
session that can be cancelled.
David B. Longo
Hi Arthur
We looked at the software, and I have been following there progress, many people
are impressed with the restore ability of there product, I am looking to have
them come in to my company after we finish construction in a couple of months,
there are a couple of emails that went back and
Hi Arthur,
We are getting ready to test their software, but from what I have
heard/read/seen, the software is quite impressive.
Sean McNamara
Senior Analyst
PJM Interconnection, L.L.C.
955 Jefferson Ave
Norristown, PA 19403
(610)666-4206
(610)666-4285 (fax)
-Original Message-
Anyone have there URL ?
Larry Way
408-743-4242 Desk
408-655-3512 Cell
408-743-4201 Fax
[EMAIL PROTECTED] 02/13/01 07:05AM
Hi Arthur,
We are getting ready to test their software, but from what I have
heard/read/seen, the software is quite impressive.
Sean McNamara
Senior Analyst
Anyone have there URL ?
Their URL is http://www.tkg.com/products.html
Beginning with TSM 4.1 and the use of Microsoft Installer, the Web Client
and Scheduler services are not automatically configured at package
installation time. They can either be configured via dsmcutil as was
mentioned in a previous post, or you can run the setup wizards from the
Hi everybody !
I come back on something that seems to be an old subject for *SM'ers : we're using the
Onbar API to ensure the backup of our informix logs, what works really nicely, except
we're facing a huge increasing of the number of tapes used for this storagepool, due
to the fact that TSM
Wanda:
With Windows 2000, the user's profile seems to consists of both ntuser.dat
and usrclass.dat (both of which TSM saves), so you should also copy
usrclass.dat to Documents and Settings\userid\Local Settings\Application
Data\Microsoft\Windows
Tim Rushforth
City of Winnipeg
-Original
Arnaud hi,
I am a little troubled understanding why you say that "TSM is unable to
expire those logs". If you use a separate mgmt class and copygroup for your
logs, and your copygroup parameters are set properly, TSM will expire your
logs.
Maybe if you want to give us some more details of yr
Bill,
Thank you, that fixed the problem! I couldn't figure out the front panel,
so I used tapeutil to load the tape into the drive, then restarted adsm to
let it find the tape still there. I am still concerned about the
SCSI_ERR10 and TAPE_ERR4 entries in the aix error log, so a CE is coming
Not recently. I understand they have done it in the past before I came here. Of
course with around 240 tapes this would take a while. I suspect that if you had a
tape error or similar during the process, it may cause a problem.
We have TSM server 3.7.4.0 on AIX 4.3.3.
David B. Longo
Anybody ever lose their admin command line prompt? I can still enter
commands but do not see the Server name prompt.
We're using it on AIX clients and planning to use it for Windows clients.
It's really slick.
Alex Paschal
Storage Administrator
Freightliner, LLC
(503) 745-6850 phone/vmail
-Original Message-
From: Kleynerman, Arthur [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 6:05 AM
It's awful. We had to rewrite 70% of the batch files to simply get the
product to work with NT in an AIX environment. Go download the DR redbook
and make your own process. It will work ... as opposed to this product.
Alex Paschal
AlexPaschal@FREIGHT
Hi Arnaud, I am now in the final testing phase before going production on
SQL-BackTrack for Informix V.3 (was on 2.1). This version has an "expiration"
feature built into its 'ibacktrack' program which will allow expiration of logs
via that utility and will also generate a script which you can
My apologies for distributing the virus yesterday.
Good Afternoon, *SMers SAPsters!
I wanted to see if I could pick your brains for a second!
What happens if you are performing null block compression before sending the
data over the network to the TSM server (RL_COMPRESSION YES in the SAP R/3
profile) and also using Tape Drive compression
Demetrius,
you are fine... the RL_COMPRESSION should be set to YES, while the 3590s
are doing their own compression.
The RL_COMPRESSION is more likely a SAP "software" compression, therefore
is improving yr overall compression packaging.
You will be surprise of the reduction rate after you set
This one isn't difficult... you have a tape which has media errors (TSM has a
problem writing to it) and the next stanza in your actl will probably say that
the tape access is read only. I have a 3575 L32 and approximatly 1 percent of my
tapes over the last 8 months or so have ended up in reado
Thanks, Othonas...
-Original Message-
From: Othonas Xixis [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 12:15 PM
To: [EMAIL PROTECTED]
Subject: Re: TDP for SAP R/3 compression vs. TAPE DRIVE compression
Demetrius,
you are fine... the RL_COMPRESSION should be set to YES,
In decision support for storage management analysis, when you generate a
report you have two fields you can fill in. One is the server you want to
generate a report for and the other is a Date. Seems like regardless of what
date I type in there, I get back nothing. Only when I leave it blank do I
Yeah, Ron. I have that on my W2K laptop right now. It's definitely a
problem in the Admin client code on the system that lost the prompt. I
suppose it will take a reinstall of the Admin client, but Windows Installer
is stubborn and won't let me uninstall it right now, either.
I'm not working
Well -- I get a compression ratio of 1.26 from backint on a 554 GB Oracle
database, and then manage to get around 102 GB per tape on Quantum DLT-7000
drives on the 35/70 GB tapes. So the Quantum drives, at least, are getting
about a 3:1 compression *after* the 25% compression from backint.
I'm
A reinstall of the admin client portion worked. Did not have to un-install
-Original Message-
From: Bill Smoldt [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 10:38 AM
To: [EMAIL PROTECTED]
Subject: Re: Command Line Prompt is gone
Yeah, Ron. I have that on my W2K laptop
We had a trial on our AIX systems and the product performs as advertised.
We are currently waiting for the SUN (Veritas)
version.
Pete
-Original Message-
From: Kleynerman, Arthur [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 7:05 AM
To: [EMAIL PROTECTED]
Subject: BMR
Has anyone ever seen the message "ANRD smnode.c (6502) : Cannot push
Normalized Insert Verb."? This occurred when a restore session was kicked off
during the night, and it cancelled a backup in order to claim the tape drive.
Normally when that happens the backup cancels cleanly and
Steve - Run your backup from a script and have the script executing by making
the schedule action=cmd. Here is a
sample from the script that runs executes backup agent (dtibackup). You could
also use your TSM commands as easily.
Hope this is what you are looking for:
~~
ADMIN="[EMAIL
Howdy Othonas! Hope you are doing well... haven't heard from you in a while... I
think the problem with doing expiration and reclamation of backups made with
SQL-BackTrack for Informix lies in the fact that if you use an older version of
the product, the agent places a long time stamp on the
Ray... It would seem that you do have a bad drive... try taking the tape that is
supposed to be mounted and stick it in any open/available slot; Do an initialize
element status to refresh the memory register on your library or reboot it and
then run audit library library_name checklabel=barcode.
I would like to use the SAN Agents with ACSLS Libraries on Clients that run
TDP for Exchange and SQL. It appears that you cannot share a ACSLS defined
library. Has anybody found a way to do this or know if it is in the
requirements for future releases?
Is there a mailx for Windoze? From MS?
thanks
Hi George, I am fine, busy as always... thanks for asking, how is San
Antonio ?
On this Informix issue, I guess Arnaud did not mentioned, and I didn't
realize at first that he was using SQL-BackTrack.
Tivoli nowadays has a new TDP for Informix 4.1 and works fine. We had three
Informix
That's great info. Many thanks... will look into the TDP 4.1... didn't know it
existed and SQL-BackTrack for Informix is quite an art to get it to actually
work. Can the TDP 4.1 restore from one machine to another??? our developers are
always wanting to put the production application server
George, here is the answers to yr questions:
Question1: Can the TDP 4.1 restore from one machine to another???
Answer1: Yes, it can, we just refreshed a 380 GB Lawson DB from the
production server to the QA server this past weekend, no problem at all.
Question2: Also can the TDP 4.1 backup
You may want to checkout BLAT which can send SMTP mail from the DOS prompt:
http://pages.infinit.net/che/blat/blat.html
Ramesh
-Original Message-
From: Richard Cowen [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 3:56 PM
To: [EMAIL PROTECTED]
Subject: Re: Sending
Matt,
For canned reporting programs, you may want to look at http://www.mxg.com
where you will find Barry Merrill's Extended Guide to computer performance
evaluation. Hence, the name MXG. If anyone has looked at SMF record type 42,
Barry has. There is also an MXG-L discussion list that you can
Steve,
When did you use BMR? I understand NT support is rather new (and I am
interested in this enhancement as well as existing platforms). Could you be
more specific about when and what problems you encountered. Could you be
more specific about your "NT in an AIX environment"? Did The Kernel
Hi,
this is not the problem. My log is currently 488 MB and I want to enlarge it to 650 MB
Wolfgang
"Toora, Kuli" [EMAIL PROTECTED] 13.02.01 15:09:16
Hello,
How big is your recovery log currently?
Have you reached the max recovery log size? the max you can have is 5420 mb.
Thanks,
Kuli
47 matches
Mail list logo
