kai,
1) under OS/390 almost for every task or activity a SMF record is
generated.
These records are collected in the SYS1.MAN* datasets. Usually, this
data
is extracted to different gdg's for whatever purpose. It makes the
working
with SMF data much more easier if you
APAR PQ50760 describes a looping condition with two migration processes and high
and low migration thresholds set to zero. This condition occurred for TSM
V4.1.2 for OS/390 with two migration processes and high and low thresholds set
to 10 and 5 respectively. In this condition, no commands are
Hi
We are running backup of a DB2 database thru the API interface to our TSM
4.1 server on AIX.
We are using compression on the client side, but space is reserved in the
disk storage pool on
the server for the size of the uncompressed data.
This makes the space reservation exceed the available
Moin Bruce,
We had have the same errors.
You may control on the TSM Clients
TCPBUFFSIZE 32
TCPWINDOWSIZE 63
TCPNODELAY yes
TXNBYTELIMIT 25600
On the Server
TCPWINDOWSIZE 0 or 63
TCPNODELAY yes
COMMTIMEOUTincrease
IDLETIMEOUT increase
Control your
Hi,
Can one connect a 3575 Library by means of a twintail connection between two
H80 servers in a HACMP setup? Does twintail support differential SCSI?
Thanks and regards
~~
Gerrit van Zyl
Tel: +27 11 800 7400
Fax: +27 11 802 3814
Cell: +27 82 570 4266
Twintiling is definitel supported by differential SCSI, don't know if you
can do the rest
Gerrit Van Zyl [EMAIL PROTECTED]@VM.MARIST.EDU on 07/30/2001
09:12:34 AM
Please respond to ADSM: Dist Stor Manager [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
To: [EMAIL
Hi,
who has installed the new tsm client 4.2 and can tell how it works.? Any
problems ?
Regards winfried
Have it running on most of my servers in a NT environment. (TSM server 4.1.3
on NT)
So far the Journal add-on seems the help with restores... Other wise no real
big increase in speed.
Joe Cascanette
-Original Message-
From: Winfried Heilmann [mailto:[EMAIL PROTECTED]]
Sent: Monday,
Yes. This is how we have our three 3575s attached. You have to remove the
terminator from the pci cards and terminate on the end of the twintail. Our
RS6000 are H70 but I am sure that the H80 will be the same.
--
Phillip Ford
Senior Software Specialist
Corporate Computer Center
Has anyone experienced this before:
I have many Solaris 2.6 and 2.7 machines getting backed up to a TSM server
on Solaris (4.1.2). Each night the backups run with a 'completed' report.
But I have run into a HUGE problem. When the backup runs automatically at
night, it misses almost the entire
Try adding the inclexcl and domain parameters to your dsm.sys file :
inclexcl /opt/tivoli/tsm/client/ba/bin/inclexcl.lst
domain / /usr /home /apps /tmp /apps/b2b /usr/local/source
My inclexcl.lst looks like this :
exclude /opt/tivoli/tsm/client/.../*.log
exclude /.../core
exclude.fs
Hi,
the server is a rs6k aix 433 tsm 4.1
the client is a hp9000 hpux 11 tsm 4.1
the problem is that backups seem quick whereas archive seem long
before we moved to tsm 4.1, the server and the client were adsm 3.1. it was
running fine : 30 minutes for a daily backup and 8 hours for a full
Hi, everybody. We're experiencing a situation where the Last Access times
on the fileserver are updated for a huge number of files, about half the
data on the server.
Windows: NT4 SP6
Server: AIX TSM 4.1.3.2
Client: NT TSM 4.1.1.16
McAfee: Server version 4.5
Filescan: Outbound files
Hi Doug !
You can see the Client-Server Compatibility on website
www.tivoli.com/support/storage_mgr/compatibility.html
- Original Message -
From: Doug McLauchlan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 22, 2001 8:35 PM
Subject: TSM Versions
Hi all, Is there a
My dsm.sys has the inclexcl defined, however, I thought the domain
statements should be in the dsm.opt file. Do I need to have the domain
statements in the dsm.sys or the dsm.opt? Anyone?
From: Cross, Ric [EMAIL PROTECTED]
Reply-To: ADSM: Dist Stor Manager [EMAIL PROTECTED]
To: [EMAIL
Hello I have a cuetion.
If i have a disaster in my ADSM server, and i have a backup of adsm databe,
is suficient to install again the server and continue working ?
Or I need a backup of the ADSM log, and volhistory ?
Wich are the files i need to install again the same server in the same
My dsm.sys has the inclexcl defined, however, I thought the domain
statements should be in the dsm.opt file. Do I need to have the domain
statements in the dsm.sys or the dsm.opt? Anyone?
Tivoli provides online manuals, available at:
Hi all,
We are currently running the server at 3.7 and clients running 3.7 and
earlier. With 3.7 going off support at the end of October, I need to
migrate my server to 4.2, along with the clients.
If I read the website correctly, the 3.7 version of the client is not
compatible with the 4.2
Claudio, if the node has been shutdown for ever wouldn't be better to delete
the file spaces and get back the resources.
-Original Message-
From: Claudio Cofre Caro [SMTP:[EMAIL PROTECTED]]
Sent: Monday, July 30, 2001 3:20 PM
To: [EMAIL PROTECTED]
Well, i can not delete the filespaces, because i have a archive data that
will be exist for at less five year...
---
Claudio Cofré Caro
SA Consultores - Chile
You have to delete the filespace with the type=backup
-Ursprüngliche Nachricht-
Von: Claudio Cofre Caro [mailto:[EMAIL PROTECTED]]
Gesendet: Montag, 30. Juli 2001 21:41
An: [EMAIL PROTECTED]
Betreff: Re: how can inactive old backup data ???
Well, i can not delete the filespaces,
Claudio, et al ...
May I suggest this is a Records Management issue more than
a technical issue Is the 'backup' data of any ongoing value
to the enterprise? What's the real value of the 'archive' data?
What data, if any, is still required for legal, financial, scientific
or cultural
Is there a procedure to replace the data on a tape that has went
bad? We use 3590 tapes on our AS/400 side and they are known to break the
tape or just become unusable for some reason.
We haven't had a bad tape on the PC side yet. We use a library that
has the tapepool tapes in it
DELETE FILESPACE TYPE=BACKUP !!!
there is my solution...
Thanks very much Schaub Joachim Paul
---
Claudio Cofré Caro
SA Consultores - Chile
Hi Charles, thanks for that I have been searching for that, I new it existed
but couldn't find it. Thanks again
Regards Doug
-Original Message-
From: charles [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 31 July 2001 05:25
To: [EMAIL PROTECTED]
Subject: Re: TSM Versions
Hi Doug !
You
Something strange is happening after the upgrade of our ADSM 3.1 to TSM
4.1.
With ADSM, the backup process took about 5 hours, and now it's taking 12
hours to complete!
Is there any know configuration parameter to be changed?
Thanks in advance!
Regards,
Mauricio
Its seems to me ur data xfer rate is low ;check summary, u will see those
statistics.
Keep compression ON in dsm.sys/dsm.opt file.
I did post perf parameters on adsm.org.
I request u to kindly mail summary pl.
-Original Message-
From: Mauricio Angelino Massa [mailto:[EMAIL
You should migrate to the TSM 4.2 server, first, then follow with the
clients. While the 3.7 clients are not officially supported with the 4.2
server, in theory they should work (although you won't get all the new 4.2
function until the clients are also upgraded). Caveat: if you experience a
Gentle Greetings,
We have a puzzling problem with one of our nodes... any help/insight would
be appreciated.
OS: WinNT 4
Client: 3.7.2.17
Manual backups through the GUI run fine... all drives are listed under the
Local tree.
However, during automatic backups, the F: drive is completely
I have a volume that is out of sync. I did a AUDIT VOLUME XX, and it listed
all the errors. The AUDIT ran successfully and did not list any damaged files
but said that the were objects that need updating. A typical error in the
ACTLOG was:
07/30/01 09:36:14 ANR2337W Need to reset
Francisco,
I found that good company-specific documentation is a must; as is an
enthusiastic student!
I inherited ADSM from a former employee who gave me a brief overview of the
physical layout of the system. When the main library failed, and ADSM fell
over dead pretending to be a trainwreck,
Jennifer,
Please check the dsm.opt file and verify that the line:
DOMAIN ALL-LOCAL
is in there.
Regards,
Rajesh Oak
--
On Mon, 30 Jul 2001 16:36:09
Jennifer I. Moore wrote:
Gentle Greetings,
We have a puzzling problem with one of our nodes... any help/insight would
be appreciated.
OS:
Dwight,
You thought correctly: specify domain in dsm.opt, not in dsm.sys!
But, the default domain is all_local fs, so normally
one doesn't need to specify domain... anyway!
Perhaps your automatic backups are not being run by a priviledged user
or you have some client schedule(s) that include a
Zosimo,
I've been a victim of that also, and on Irix. It can kill your system by
filling up the log very fast.
The fix is to use client 3.1.0.7 or later and use the switch
ARCHSYMLinkasfile No.
Otherwise you end up with circular link definitions. We fought that for a
year before that client
The RESTORE VOLUME command is used for this. Use it with
preview=yes and it won't actaully do restore. Then look at actlog
and you will see what tapes are needed to actually do the restore
including tapes in vault. I have used this many times to restore
broken/bad tapes.
Note with the
Hi *SM experts,
When client fires a incremental job , usally it attempts a backup in a
minute (Idletime). This is what happening since january. But, today i have
problem, its in idle state for more than the time which i have set in
server options (15min) and backup failed with error message in
Is there anywhere that I can find the technical details on how SUBFILE
works? For example..
- what does it use the local cache for? - if I have 20GB of backup data, how
does it use the 10MB cache area?
- what if I delete the local cache?
- does TSM always backup the differences, or is it smart
37 matches
Mail list logo