slow performance across a firewall

Hello TSMers, when I backup my windows client in a dmz across a firewall, normaly the performance is 7 mb/sec doing an incremental backup. Now I change the configuration to serveronly initiated sessions and the performance decreases to 300 kb/sec !!! The tsm server is at 5.2.1.2 on AIX 5.2,

Full diskpool clients to tape, but when the diskpool is migrate d the clients still goes to tape

hello I guess the subjectline says it all. When my diskpool gets full the new sessions goes directly to the tapepool, but when the diskpool is migrated and gets free space the sessions still wait for mountpoint in my tapepool. Is it normal behaviour?? Mvh Niklas Lundström Föreningssparbanken

TSM server stops listening

Hi all, we recently migrated to AIX 5.1ml5 and TSM server 5.2.1.2 Now we have the problem that after a few weeks our servers tops accepting connections. I recall this being an AIX 5.1 bug, unfortunately, I'm unable to find the APAR, could anybody point me in the right direction? (apar number?)

Re: Full diskpool clients to tape, but when the diskpool is migrate d the clients still goes to tape

- (on mbox.infotel.bg) email-body was scanned and no virus found - Yes, it is normal. 1. The diskpool gets full 2. Some sessions request backups and end up with mount requests 3. The diskpool is

Re: TSM from AIX 4.3.3 to AIX 5.2

Your scenario ought to work flawlessly. As a precaution you can drain your disk pool(s) and take a DB backup. Zlatko Krastev IT Consultant Steven Bridge [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 27.11.2003 21:44 Please respond to ADSM: Dist Stor Manager

Re: data in wrong stgpool

Single move nodedata ought to be enough for single node. Depending on the number of nodes, several moves can be less time consuming than collocation of the whole stgpool. clean archdir and clean backupgroup are intended for totally different purposes and the only surprise would be if they did what

Re: deleting 1200 volumes (== one stgpool)

Hi Remco! This is what I would do: dsmadmc -commadelimited q vol stgpool=obsoltestgpool c:\temp\vollist.txt Open this file in Excel, insert a column before, where you type del volume and drag this line all the way down. Do the same in the column C and type there discarddata yes wait=yes. Also

Re: Antw: Please help: Question concerning cleanup backupgroups

This is misleading!!! The whole idea behind clean backupgroups command is to be abel to run it in parts, i.e. do some work and cancel the process. Committed transactions will be confirmed and will stay. Only the last transaction will be rolled back! That's why the completion state is

[no subject]

Hi David, Go to you Java Control Panel ( settings, at configuration panel) . Deselect Microsoft Internet explorer at the Browser tab and the command line is working again. . This helps for us . Best Regards, Met Vriendelijke Groet, Mit freundlichen Gruessen, Arnold van Wijnbergen Technical

Re: Full diskpool clients to tape, but when the diskpool is migrate d the clients still goes to tape

I guess the subjectline says it all. When my diskpool gets full the new sessions goes directly to the tapepool, but when the diskpool is migrated and gets free space the sessions still wait for mountpoint in my tapepool. Is it normal behaviour?? Use Query Content to see what went to tape. It

FW: deleting 1200 volumes (== one stgpool)

Let SQL do it for you!! Pipe the output of these commands to a file...(make sure the storagepool name is upper case. It matters!)... SET SQLDISPLAYMODE WIDE SELECT 'DEL VOL ' || TRIM(VOLUME_NAME) || ' DISCARD=YES WAIT=YES' FROM VOLUMES WHERE STGPOOL_NAME='uppercase storage pool name' You can

TSM 5.1.8 and 'events' table

Hello. Somehow 'events' table got broken some time ago. All schedules with 'missed' status have 'actual_start' set to 1900-01-01 :( Is this a common problem and about to be fixed? -- Przemysaw Maciuszko Agora SA

Query dsm.opt file from TSM Server?

I have 2 Network Cards in my TSM Server. I would like to know which clients are connecting to which card. I know I can look at each individual client at the dsm.opt file. Is there a way to find this information from the server side? If I don't have to go to each client that would be great!

last backup info

Can anyone explain why the last backup start date/time, last backup completion date/time, and deletion occurred in filespace date/time would have no information in them for filespaces reported on some nodes? The capacity and percent util register data. Yesterday we had a SAN controller firmware

Re: last backup info

We have found that many TDP agents, especially older ones, don't bother loading last-backup-date info into the TSM database when they complete. I think I've also seen this with some Mac clients. But almost all the filesystem clients DO load these fields correctly. Another reason they're empty

Re: Domino server crashes at startup 'TDP for Lotus Domino' backup

Paul, I would upgrade to the latest Data Protection for Domino. There have been a number of issues similar to this solved. Go here: Site: ftp.software.ibm.com Dir: /storage/tivoli-storage-management/maintenance/tivoli-data-protection/domino/v515 If the problem still exists, please call

ANR8302E: How do I test new drive?

Ladies, gentlemen, a new, replaced LTO drive gives me headaches - in the following situation: OS: MS Win2k Advanced Server, 5.00.2195, SP2 TSM: Storage Management Server for Windows - Version 5, Release 1, Level 0.0 After having worked with no probs afaik, last week one of my two HP ultrium LTO

Re: ANR8302E: How do I test new drive?

Just a thought, take TSM server down. Use an OS native program (Microsoft Backup) using a hand fed scratch tape or two to backup the local system and restore a few files until you believe the drive will hold its own. Then start with TSM. If the same tapes are read and written OK in other

ACD5130 - error=4103 - TDP for Domino

Hello all, I'm running TSM 5.2.1.0 on a Windows 2003 server. I have 4 TDP for Domino Clients (Windows 2000) that were just upgraded to Domino 6.5. TDP Version 5.1.5, TSM Version 5.1.5.9 Three of the four clients receive the following error message: (can't see a difference)

Re: Query dsm.opt file from TSM Server?

Hi, Marc. The easiest way is to have your networking department do a ip accounting on the switch ports your TSM server interfaces are connected to. It's easy and it's low overhead and as a bonus it comes out in an easy to read format. Otherwise, you might do an iptrace and process the log.

Re: ACD5130 - error=4103 - TDP for Domino

Have you checked if the Lotus Registry entry is OK? The registry entry HKEY_LOCAL_MACHINE\SOFTWARE\Lotus\Domino\Path should point to the Domino execution directory. If the value is invalid or the entry does not exist, you can workaround it by pre-appending the Domino execution directory to the

Tape Volumes Needed for a Restore

If I load the TSM GUI and select a few directories to restore, is there some way to determine which tapes will be required to satisfy that restore? A sort of preview=yes option for restores? Or how would you determine which tapes you need given a point in time restore of an entire server? Thanks,

Re: Query dsm.opt file from TSM Server?

I have 2 Network Cards in my TSM Server. I would like to know which clients are connecting to which card. I know I can look at each individual client at the dsm.opt file. Is there a way to find this information from the server side? If I don't have to go to each client that would be great! See

Re: Tape Volumes Needed for a Restore

According to Richard Sims wonderful Quick Facts page there is no preview option for the restore command. Go to http://people.bu.edu/rbs/ADSM.QuickFacts and search for Restoral preview All credit goes to mr. Sims. Kind regards, Alexander