Hello,
Since most IT departments like the word centralize I wonder how other achieve a
centralized TSM enviroment.
We have smaller sites with 10-40 servers connected to main office with
20-155Mbit. One way to setup backup and recovery is to attach all servers to a
networked storage system.
all,
I am using aix 5.3 and tsm5.3.3 with a 3583 3xlto2 quite happily.
I want to add a msl 6060 but cannot get tsm/aix to see it.
I have tried smit-dev-tsm-dev, cfgmgr but nothing will become
available.
how do I get to the point where I can DEF LIBR?
Hi Nigel!
I haven't got any experience with non-IBM devices, but as far as I know,
you will have to use the TSM Device Support driver for non-IBM tape
devices.
Did you check the IBM technote for the MSL 6000 series? Here it is:
http://www-1.ibm.com/support/docview.wss?rs=663uid=swg21116751
Kindest
Geoff,
It seem's that en_US is missing in your AIX-Environment - see TSM
Installation requirements (Installation Guide):
United States English (ISO8559), the en_US Cultural convention and Language
translation environment, is a required installation regardless of the
language environment you are
You describe an environment like our own, and is why we are moving off of
this product. I would say no, it doesn't fit your environment.
Rick
Thomas Denier
[EMAIL PROTECTED]
FFERSONHOSPITAL.O To
RG
Hi Everybody,
I just upgraded from TSM 5.1.6 to TSM 5.3.2.3 on AIX. Does anyone have a link
or information other than the redbook regarding changes in the DRM module ?
Rich
Goodday,
We have IBM Tivoli Storage Manager 5.3.2.0 running on a ppc64 redhat
machine One of the clients is a hp 9000 with hpux 11.i V1.
By accident I started three instances of adsmcad. I killed two of them and
happily went home at the end of the day.
The next day I found out that the backup
On Thu, Apr 06, 2006 at 03:25:58PM +0200, Vlijmen, M. van wrote:
Am I right in assuming that correct authentication only takes place between
the server and the dsmcad process that initiated the first
contact with the server? So, in this case the TSM server didn't recognize
the dsmcad process?
On Apr 6, 2006, at 9:25 AM, Vlijmen, M. van wrote:
Goodday,
We have IBM Tivoli Storage Manager 5.3.2.0 running on a ppc64 redhat
machine One of the clients is a hp 9000 with hpux 11.i V1.
By accident I started three instances of adsmcad. I killed two of
them and
happily went home at the end
It is very difficult to provide specific answers when there is very little
detail provided. For example, output from QUERY SCHEDULE F=D for the
schedule you defined.
In general, it would probably be better to put the command into a script,
then have the scheduler run the script.
For example:
You don't mention what client this is - but the newly released ones
(5.3.3) support journaling for AIX as well as Windows.
That might help with the incremental backup issue. Could be a lot of
the time is just in navigating the file tree.
-Original Message-
From: ADSM: Dist Stor Manager
Hi Rod!
TSM stores backups as aggregates. An aggregate can contain multiple
client backup files. The client files within an aggregate will expire
over time and thus occupy space within the aggregate.
When you use a file device class or a tape, you can reclaim the wasted
space these expired files
You're right! Started out at v5.3.0 on Win 2003. Have upgraded to
v5.3.2.2, v5.3.3, and downgraded back down to 5.3.0 to work through
various issues (win error 1450, insufficient resources). Journaling may
not be answer either, though I would love for it to be, because there is
a high degree of
Hi all
Is there anyone out there that have a best practice DSM.OPT file for
Win2k servers and Win2003 servers
If so ... can I have a copy to look at it ..
Thanks
Luc Beaudoin
Network Administrator/Storage
Hopital General Juif S.M.B.D.
Tel: (514) 340-8222 ext:8254
You might try backing up each mount point as a separate client. You'll need
several dsm.opt files with the proper include and clientname options.
We do this on some of our large Novell clusters treating each volume as a
distinct client.
Gerald Michalak
630-691-4819
[EMAIL PROTECTED]
ADSM:
Well you would think that because of the error that would be the case but it
is not. The file is there. The question I have is, the message reports,
tivoli.tsm.msg.en_US.server is missing, the file that was in the download
is tivoli.tsm.msg.EN_US.server. So is it failing because of the name
being
This happened to me and I had to have my UNIX guy check on some part of the
server language stuff that wasn't installed.I believe it was called
something like ISO8559. I think someone else mentioned this as well.
After he fixed the unix part..my install was fine.
-Original
Swell... Not having been delivered the CD's for AIX is it possible to
download these files? Does anyone know the fileset name I need to look for?
Thanks,
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
-Original
Please take me off your list
Hi list,
I have just installed TSM Server 5.3.2 on a Windows 2003 boxI was about
to define the library (Dell PowerVault 132T) and its drives. The problem is
that I cannot open the Administrative Command Line.once I click on its
icon, the prompt window opens and closes
For our local sites we vault daily, i.e we send copypool tapes to the vault
daily. For our remote sites since we do not any local vault person, we have a
contract with a company and the copypool tapes are sent to the vault once a
week.
The DR tapes should be sent evry day if possible else in
Is the DB backup of any use after the next db backup is taken. The data
on the volumes changes, and data is expired and tapes reclaimed...so
what is the value of older db backups?
We back up the db to disk and ftp a copy over to a remote site.
Our backup data is kept in one tape library and the
Have you considered sending the data to a virtual volume copypool at you
local TSM server and then sending those tapes offsite ? That way you
could send data daily and have daily offsite copies.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
On Apr 6, 2006, at 2:31 PM, Lawrence Clark wrote:
Is the DB backup of any use after the next db backup is taken. The
data
on the volumes changes, and data is expired and tapes reclaimed...so
what is the value of older db backups? ...
You're kidding...right?
We make and retain multiple backup
We are running a database backup that has been going for approx. 4 hrs.
now, it has been on the final page for 1 1/2 hrs. Are others seeing this
same issue? If so, is there anything that can be done about it?
TSM Server - AIX 5.2, TSM5.2.6.2
Database size 100GB +
Brenda Collins
Storage
I cannot speak to your drive issue, but regading dsmadmc:
1) Check the properties for the admin command line link, and make sure the
Target and Start in paths point to the correct directory
location.where dsmadmc.exe exists.
2) Make sure dsm.opt exists in the directory with dsmadmc.exe. If you
I have a similar configuration and I see in the process table
that when a DB backup completes, it sometimes sits there for a few
minutes before the process disappears, but I can't say I have ever seen
1.5 hours. Is the TSM server extremely busy with expiring inventory or
something else?
Did you download the software from Passport and happen to expand these
files on Windows (before moving them up to the AIX server)? Windows is
not case sensitive so I have seen problems in the past where people use
Winzip or another Windows tool to untar the files and a fileset with en_US
will
Is your log extrememly full? I have been told in the past that when the
DB backup ends, the log pages are appended on the back, and played back
if the DB is restored.
--- Brenda Collins [EMAIL PROTECTED] wrote:
We are running a database backup that has been going for approx. 4
hrs.
now, it
Thank you Andrew!! Indeed the dsm.opt file was not there..
Mario
- Original Message
From: Andrew Raibeck [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Thursday, April 6, 2006 3:55:26 PM
Subject: Re: Admin CLI issue and library config
I cannot speak to your drive issue, but
I've got a question about the usage of the
TCPSERVERADDRESS line in the dsm.opt file on the clients.
Currently I have the IP address of the TSM server listed in
the dsm.opt file on the clients. We will be implementing a new
addressing scheme for all of our servers in a
Does anyone know how to tell how big the expiration table is?
The reason is that I ran CLEANUP EXPTABLE on Monday.
On one of my servers, it finished up almost immediately.
On the other, it's been running for almost 3 days.
Because of this, when I try to run EXPIRE INV, I get:
tsm:
If it's by hostname, then it should be vaguely round-robin, if your DNS
has multiple address records. All connections for the cient would use the
IP chosen by that clients' resolver libraries.
You could also try using etherchannel. If set up correctly, you would
simply have two NICs with the
We use two card or one. We have both TSM names in the DNS tsm_primary
and tsm_backup. We then use the name we want to use in the dsm.opt
file. The backup is a private network we use just for backups. We do
not route to or from this network. Thus we can be sure that a server is
not going out
What kind of scheduling do you use? If you use prompted scheduling then it's
the TSM server that will contact the client for backup not the other way
around. As far as which ip the client will connect to if you leave the dns
entry, it will connect to the ip address that the dns entry resolves too.
OK, I finally figured it out.
It's processing by NODES.REG_TIME, then by FSID.
I have 75 of 479 nodes left.
I'll look in my occupancy extracts to see how much more there is.
On 06.04.06 at 16:55 [EMAIL PROTECTED] wrote:
Date: Thu, 6 Apr 2006 16:55:50 -0500
From: Josh-Daniel Davis [EMAIL
On Apr 6, 2006, at 5:55 PM, Josh-Daniel Davis wrote:
I thought maybe the SHOW IMV output might help, but I don't know
what HWM
means:
It most commonly means High Water Mark.
Richard Sims
One of the windows servers we back up via TSM has been showing the
errors below in the log for the past couple of days.
04/06/2006 19:50:04 ANS1228E Sending of object
'\\qmaster\c$\adsm.sys\EVENTLOG' failed
04/06/2006 19:50:04 ANS1228E Sending of object
'\\qmaster\c$\adsm.sys\WMI' failed
38 matches
Mail list logo