Hello,
We are planning a disk upgrade mainly to increase the number and size of
DISKPOOLS.
The upgrade will be carried out by one our Server Administrators; my
question is
a disk upgrade on a TSM Server different from that of an ordinary server
?
OR
Will we have to treat the database, logs and
Bill,
For primary disk STGPOOLS that do not have caching turned on, I would
update all the volumes to be read-only, make sure that a backup to
copypool has completed and then migrate them down to zero. You can query
the content of the volumes afterwards to be doubly sure that they are
empty. You
Hello List,
my TS3310 Library misses a Volume (audit libr found out).
Is it possible to search for lost Volumes in the Library?
Tried tapeutil -f /dev/smc0 inventory, but that doesn't help.
There is no Volume in Bulk-Loader. Nobody checks out Volumes and the library is
in the same config as it was
Hi,
I would try to use the application and its commands rather than an
external command like tapeutil.
Checkin libv search=yes stat=scratch/private
Use help checkin libv for the full syntax.
Regards,
Karel
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
On Tue, Oct 10, 2006 at 12:34:38PM +0200, Bos, Karel wrote:
Hi,
I would try to use the application and its commands rather than an
external command like tapeutil.
Checkin libv search=yes stat=scratch/private
Use help checkin libv for the full syntax.
Did that, no found volumes.
Cheers,
ku
On Oct 10, 2006, at 6:28 AM, Hans-Dieter Kutz wrote:
Hello List,
my TS3310 Library misses a Volume (audit libr found out).
Is it possible to search for lost Volumes in the Library?
Tried tapeutil -f /dev/smc0 inventory, but that doesn't help.
There is no Volume in Bulk-Loader. Nobody checks out
No, you cannot just export/import the registry key.
See the README file for the 5.3.4.x clients and look for the bullet titled
ENCRYPTKEY SAVE requirements. Also look up APAR IC48782.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes
Thanks Andy,
From what I understand, you cannot encrypt the systemobjects which would
include the registry, is this the case and if so, is there a way around
this in order to secure that your registry is not sent across the wire
un-encrytpted when you are not using a VPN tunnel or encryption over
Hi list,
I have a TSM 5.3.2 Server running on a W2K SP4 with a IBM Ultrium LTO III 3580
connected via SCSI interface. The TSM Device Driver service does not start and
I get the following error:
The system could not find the device specified
Please advise.
Thanks
Mario
On Oct 10, 2006, at 11:53 AM, Mario Behring wrote:
Hi list,
I have a TSM 5.3.2 Server running on a W2K SP4 with a IBM Ultrium
LTO III 3580 connected via SCSI interface. The TSM Device Driver
service does not start and I get the following error:
The system could not find the device
Hi
I have questions,which ebook you can recommend relating
TSM 5.3 Administration and Instalation ,
Service of libraries IBM 3584
I thank for answer
Sławek
Mario
You don't mention whether you have already loaded the correct IBM device
drivers for LTO3's through Windows device manager, but the below might
be of assistance.
The way in which the Windows TSM device driver works changed at V5.2.
See serwinref.pdf
IBM Device Driver for 3570, 3590, and
Leigh,
The driver installed is the IBM ULTRIUM III 3580 TAPE DRIVE (for Tivoli
Storage Manager). Should I uninstall the TSM Device Driver then ??
Thanks.
Mario
- Original Message
From: Leigh Reed [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Tuesday, October 10, 2006 1:31:10 PM
How I can clean or optimize my base TSM,Thanks
Sławek
On Oct 10, 2006, at 1:12 PM, yazoo PL wrote:
How I can clean or optimize my base TSM,Thanks
Go to the TSM Support Page,
http://www.ibm.com/software/sysmgmt/products/support/
IBMTivoliStorageManager.html
and search on: Performance Tuning Guide
where you will find Performance Tuning to
Hello,
I have been working on a script to show what time our last backups end
(specifically
what time the last backup end). Does anyone have a script that I can
compare to which
might help?
TSM 5.3
AIX 5.3
Thanks in advance!
I've had a TSM server running for a while, the last session number I saw
was:
1,385,881
What's the highest this will go before crashing the server?
Gerald Michalak
[EMAIL PROTECTED]
Hi list,
I have the following environment:
TSM 5.3.2 Server running on a W2K box
IBM ULTRIUM III LTO 3580 connected via SCSI
I´ve installed the windows certified driver downloaded from the
ftp://ftp.software.ibm.com/storage/devdrvr/Windows/Win2000/Latest/ and
I have successfully backed up Mirapoint with TSM. More specifically, what do
you want to know?
Awaiting your reply.
--Sunmansun
On 10/9/06, Aaron Becar [EMAIL PROTECTED] wrote:
I have been reading some past archives about NDMP, and even more
specifically, Mirapoint backups. I was wondering
Its probably not the highest
3,375,434
Server restart 08/08/2006
Regards,
Stephen.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Gerald Michalak
Sent: Wednesday, 11 October 2006 06:04
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Highest session
Sunmansun,
Hey we just received word that Mirapoint does not support a fiber
attached drive. So my question for you, is how are you doing it? Do
you have a separate library connected to the Mirapoint server via the
SCSI (LVD) port? What kind of infrastructure do you have setup to make
this
On Tue, Oct 10, 2006 at 12:31:52PM -1000, Aaron Becar wrote:
Sunmansun,
Hey we just received word that Mirapoint does not support a fiber
attached drive. So my question for you, is how are you doing it? Do
you have a separate library connected to the Mirapoint server via the
SCSI (LVD)
22 matches
Mail list logo