I was in the beta as well Bill. :)
But I am sorry to say IBM did not do a good job on the 6.1.2.0 Windows
release instance wizard, Wanda pointed me the problem on the IBM page :
http://www-01.ibm.com/support/docview.wss?uid=swg21390301
There they confirm the problem, I did two clean installs and
Yudi
The max throughput of LTO3 is 80 MB/s and LTO4 is 120 - so you've lost
throughput there.
It looks like (from my very rough calcs) that you were getting approx
55MB/s average from your LTO3's and LESS than 67MB/s (that's if it
finished at 10 hours which it isn't)
It looks like the
Thank you Wanda, this fixed the problem for me, I didn't have to use any
other userid than the one I used to install TSM (local admin) and now
all is fine.
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] Namens Wanda
Prather
Verzonden: woensdag 26
Where do I enable compression for LTO4 tapes/drives in a 3584 library? The
tapes only fill up to 800 GB.
A0L4TAPEPOOL1 LTO4CLASS 771.2 G 98.4
Full
A1L4TAPEPOOL1 LTO4CLASS 783.7 G 96.6
Full
A2L4
You do this in the device class, the format option can be set to ULTRIUM4C to
force compression.
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] Namens Lars-Erik
Öhman
Verzonden: donderdag 27 augustus 2009 12:25
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp:
What are your device class settings for the 'LTO4CLASS' device class? `q
devcl LTO4CLASS f=d` might show that your device class configuration isn't
enabling compression at the moment.
It also depends completely upon the nature of the data being stored on tape
- already compressed data (e.g. media
Hi,
Its on you device class definitions.
Device Class Name: LTO_PRIM
Device Type: LTO
Format: DRIVE
You can change the default from drive to ultrium 4c for forced compression.
This will only help if you data is not already
Thanks all. It was set to ULTRIUM4 and not ULTRIUM4C.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Bos,
Karel
Sent: den 27 augusti 2009 12:33
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] LTO4 and compression
Hi,
Its on you device class
What is the best to use, ULTRIUM4C or DRIVE?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Bos,
Karel
Sent: den 27 augusti 2009 12:33
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] LTO4 and compression
Hi,
Its on you device class
FWIW on my TSM servers they are all set to DRIVE
Steven Langdale
Global Information Services
EAME SAN/Storage Planning and Implementation
( Phone : +44 (0)1733 584175
( Mob: +44 (0)7876 216782
ü Conference: +44 (0)208 609 7400 Code: 331817
+ Email: steven.langd...@cat.com
Lars-Erik Öhman
On Aug 27, 2009, at 6:42 AM, Lars-Erik Öhman wrote:
What is the best to use, ULTRIUM4C or DRIVE?
In computer work, the more explicit you are to the system as to what
you want, the more likely you are to get it. There have been IBM
advisories in the past against using DRIVE. I would not
The document describes this as being a problem using the Microsoft
management Console (MMC) plug-in for TSM. In the past this was the easiest
way to create a new TSM instance on Winders. With TSM 6.1 (and I was part of
the beta, too) I reported issues with the MMC and it crashing and not doing
the
Stefan,
all my executions of the wizard were at the 6.1.0.0 level and on 64bit
Linux.
I hope they haven't introduced a bug in 6.1.2.0.
- bill
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Stefan Folkerts
Sent: Thursday, August 27, 2009
I haven't gotten the wizard to work yet, on Windows.
No problem on AIX.
The bug with running the Windows wizard through the MMC is supposed to be
fixed in 6.1.3, no target date yet.
On Thu, Aug 27, 2009 at 10:27 AM, Colwell, William F.
bcolw...@draper.comwrote:
Stefan,
all my executions of
I'm looking at this wondering if there is more than one issue going on.
This is a Linux box that was built using all the tools that should have,
from what I've read anyway, set up all variables so as not to have
issues with a DB Backup. Following the recommended steps everything
seems to be
15 matches
Mail list logo
