SV: GroupWise locks under backup!

Hi Clark It's a multiprocessor HP server with dual 2.4 GHz Xeon processors... Regards Flemming -Oprindelig meddelelse- Fra: Clark Mumaw [mailto:[EMAIL PROTECTED] Sendt: on 15-10-2003 21:41 Til: [EMAIL PROTECTED] Cc: Emne: Re:

GroupWise locks under backup!

Hi all Got a problem with a NetWare 6 SP3 server with GroupWise 6.5 SP0... while the backup is active the utilization is 100% (3x NWPA at aprox. 33%) - doesn't occur while backup isn't loaded! Any ideas? regards Flemming

SV: Very long Netware restore

Hi Rick Suggestions: 1) Check your Maximum Physical Receive Packet Size (or maximum frame size) and tune it - it's a set parameter and the command is SET MAXIMUM PHYSICAL RECEIVE PACKET SIZE = XXX, and you have to put it in the STARTUP.NCF! The normal size on Ethernet is 1514 Bytes... BUT if

SV: Remove IPX

Hi Mark I have experienced something simirlarly... I had 3 identical machines - both hardware, and software - 2 machines would accept and keep the password encrypted... but the third wouldn't! I've never found a solution for this, and was forced to put the NetWare userid password in the

SV: SV: SV: Multiple backup of a file that doesn't change?

Hi Andy Comment as follows (marked with #); Flemming, The only possibilities I can think of: - someone ran a selective backup of the file (how have you verified that this is not the case?) # This is not the case, the only backup which has been performed on this server is a incremental

Multiple backup of a file that doesn't change?

Hi all First of all... I'm not drunk, on drugs or anything like that - only a severe headache I have a NetWare 5.1 SP3 (I know it's old...), TSA5UP12 is applied, TSM Client 5.1.6.0 - and running a normal scheduled incremental backup every night... and still I've a screendump in front of

SV: Multiple backup of a file that doesn't change?

Hi Thanks for your post - there have been no selective backup... only incremental - and no permissions has been changed! Regards Flemming -Oprindelig meddelelse- Fra: Remco Post [mailto:[EMAIL PROTECTED] Sendt: 30. juli 2003 14:51 Til: [EMAIL PROTECTED] Emne: Re: Multiple backup of a

SV: SV: Multiple backup of a file that doesn't change?

Hi Richard NetWare see's the modification date which belongs to the file it self... not necessary a date/time set in the timespan the file have existed on the filesystem... therefore you can have a modification date before the creation date... I have been going through the schedlog file for

SV: Consolemode in TSM 5.1.5

Did you choose Custom during installation - and added the Administrative Client Command Line Files?? If not, that might be the reason ;o) - else try reinstalling the client. Regards Flemming -Oprindelig meddelelse- Fra: Luciano Ariceto [mailto:[EMAIL PROTECTED] Sendt: 25. juli 2003

SV: High Utilization on Netware Server

Hi I've been using Client version 5.1.5.15 (ftp://service.boulder.ibm.com/storage/tivoli-storage-management/patches/client/v5r1/Netware/v515/) on NetWare 6 - it works fine! Have done some testing with 5.1.6, and it seems ok... For the time being, I would stay off 5.2... especially because

SV: SV: Wouldn't it be nice...

to the list (even those from Tibet :-))) Zlatko Krastev IT Consultant Flemming Hougaard [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 25.07.2003 12:34 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:SV: Wouldn't

SV: Wouldn't it be nice...

suggestions and initial poster's report (if such one exists). The approach can be used for both real-life lessons and real-life testing of the staff. You can benefit from the list if you invest time and resources in it! Zlatko Krastev IT Consultant Flemming Hougaard [EMAIL PROTECTED] Sent by: ADSM

SV: Restore of a NetWare Cluster... what's happening?

? I'm coming into this kind of late, but here is a copy of the configuration I use to configure all of my NetWare clusters. With regards, Dave Marsh Scottsdale Healthcare Information Services 480.675.4395 -Original Message- From: Flemming Hougaard [mailto:[EMAIL PROTECTED] Sent: Wednesday

Wouldn't it be nice...

There can be no doubt, that we all appreciate the effort Andy Raibeck from Tivoli contributes to this mailinglist! However it's my belief, that Andy is mostly involved in TSM for Microsoft - even though he has been answering some questions related to Novell... But wouldn't it be nice to have

SV: SV: Restore of a NetWare Cluster... what's happening?

Hi Lee The smsrun.bas file has been changed to: nlmArray = Array(SMDR, TSA600 /cluster=off, TSAPROXY) And the latest available update to the Target Service Agents has been applied (TSA5UP12). Thanks for the input, but this should be covered ;o) Regards Flemming -Oprindelig

SV: Restore of a NetWare Cluster... what's happening?

.. by the way - if I make a restore of 1 file, size around 6 kb - it cannot be restored before any migration and/or databasebackup has been stopped... So I'm certain the problem is related to the filespace made by a NetWare Cluster! Regards Flemming -Oprindelig meddelelse- Fra: Richard

SV: Tivoli and GWTSA.NLM

Hi Lee I have been asking the same question, and here what's come up: There is no roadmap since we have no plans at this time to implement this. I would recommend that you or any other customers interested in TSM support for Novell GroupWise (or for any new feature, for that matter) open a

Restore of a NetWare Cluster... what's happening?

Hi all I've been restoring some data on a NetWare Cluster... and I have had several problems doing this: The TSM Server is a 5.1.6.2 on a AIX 4.3.3. Client software, NetWare 6, SP3 and TSM Client 5.1.6.0. Problem: Every time I tried to start a restore on the cluster, the following happened: -

SV: Restore of a NetWare Cluster... what's happening?

Hi Richard Note that the problem only occurs while restoring a NetWare Cluster!!! And in a situation in which there are no processes occuring... the restores works fine... So I don't believe it has anything to do with the COMMTimeout... in that case the problem should be more persistent!

NetWare Client 5.2 and Webinterface

Hi I have been looking over the new ITSM Client for NetWare version 5.2.0.0... and I'm properly going to get an massive headache ;o) I installed the client on a testserver, and tried to log in with the appropriate credentials belonging to the node it self - it failed?? I tried an administrator

SV: NetWare Client 5.2 and Webinterface

is listed. See if that admin account is locked. Perhaps reset that admin password. Really, it looks like nothing should have changed. Ben -Original Message- From: Flemming Hougaard [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 02, 2003 8:27 AM To: [EMAIL PROTECTED] Subject

TCPNodelay and NetWare?

Hi all The above mentioned option, is that available in the NetWare Client or not? In the documentation it says nothing, but if used there are no errors... So is it there or not? regards Flemming

What sched mode to use in Novell?

Hi all I would like to hear your opinion on how to schedule your backupjobs in Novell - as far as I see it, there are 2 ways to do it...: - 1: using the DSMCAD together with the MANAGEDSERVICES SCHEDULE WEBCLIENT in the DSM.OPT... as far as I can tell the way Tivoli recommend... But I have

SV: Archive Netware Server

Hi Please answer the following: - Client version? - TSA versions? - SP level? - TCPWINDOWSIZE - TCPBUFFSIZE - TCPNODELAY Flemming -Oprindelig meddelelse- Fra: Anja Frey [mailto:[EMAIL PROTECTED] Sendt: 18. juni 2003 12:30 Til: [EMAIL PROTECTED] Emne: Archive Netware Server Hi,

SV: Netware restore problem

Hi Brec As Mark says, get off client ;o) U can get the latest 5.1.6 at: ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintenance/client/v5r1/Netware/v516/ or the latest patched version of 5.1.5.15 at:

SV: Antw: Re: Novell-Server abends with TSM Client 4.2

Hi Torsten Just to point it out... the latest client officially supporting NetWare 4.11 was Client version 4.1.3.99! But have you tried to upgrade your client to version 4.2.2?? Regards Flemming -Oprindelig meddelelse- Fra: Torsten Strecke [mailto:[EMAIL PROTECTED] Sendt: 16. juni

SV: Backup NDS license-object

Hello Torsten You need to make an exclude of the licenseobject container as in the example below: EXCLUDE.DIR NDS:.O=Novell.OU=Aarhus.NLS:Publisher=Novell+NLS:Product=NetWare 5 Conn SCL+NLS:Version=510 EXCLUDE.DIR NDS:.O=Novell.OU=Aarhus.NLS:Publisher=Novell+NLS:Product=NetWare 5

SV: Netware NDS question for TSM

Have u used the DSMC QUERY TSA NDS? and the NWPWFILE YES in the DSM.OPT? Sometimes it still fails, and then u can use the following NWUSer treename:.username.context:password eg.nwuser treea:.admin.ibm:secret Regards Flemming -Oprindelig meddelelse- Fra: Ron Lochhead [mailto:[EMAIL

SV: Problem with Novell 4.2.3.0 Client

What version of NetWare? What version of TSA update? Which Support Pack Level? Regards Flemming -Oprindelig meddelelse- Fra: Stumpf, Joachim [mailto:[EMAIL PROTECTED]] Sendt: 16. januar 2003 08:51 Til: [EMAIL PROTECTED] Emne: Problem with Novell 4.2.3.0 Client Hello out there, we

SV: Novell client java gui problem

Hi Mark Which version of NetWare are u running? I've tested the mentioned Client Version, and it seems to functioning on NetWare 6.0 without problems - but on NetWare 5.1 I've been experiencing some problems with the Java GUI... so on NetWare 5.1 I use the 5.1.0.3. Regards Flemming

SV: Novell client java gui problem

PROTECTED]] Sendt: 9. december 2002 14:04 Til: [EMAIL PROTECTED] Emne: Re: Novell client java gui problem Were running Netware 5.1 too. I'm going to try 5.1.0.3 and I'll let you know. Thanks for the response!! Mark -Original Message- From: Flemming Hougaard [mailto:[EMAIL PROTECTED

SV: Novell bare-metal restore

u just do it backwards - restore to the NetWare volume, then use TOOLBOX.NLM etc. etc. Regards Flemming Hougaard -Oprindelig meddelelse- Fra: Zlatko Krastev/ACIT [mailto:[EMAIL PROTECTED]] Sendt: 22. november 2002 12:55 Til: [EMAIL PROTECTED] Emne: Re: Novell bare-metal restore Daniel

SV: SV: Novell bare-metal restore

- but there is a lot of the above mentioned there can be done by scripts... and regarding time, I suppose that can be minimized by using image software to create a standard DOS volume and a standard SYS: volume. Regards Flemming Hougaard -Oprindelig meddelelse- Fra: Daniel Sparrman

SV: Downgrade Novell Client 4.1.3 to 4.1.2???

Why do you want to downgrade?? And which build are you currently using in 4.1.3? Regards Flemming -Oprindelig meddelelse- Fra: Marc Levitan [mailto:[EMAIL PROTECTED]] Sendt: 30. september 2002 18:27 Til: [EMAIL PROTECTED] Emne: Downgrade Novell Client 4.1.3 to 4.1.2??? Are there any

SV: Netware and 4gb of ram

Hi Rikk If you use the command MEMORY in the console, does NetWare see all the memory? What kind of hardware are you using? Regards Flemming Hougaard -Oprindelig meddelelse- Fra: Cahill, Ricky [mailto:[EMAIL PROTECTED]] Sendt: 20. september 2002 09:45 Til: [EMAIL PROTECTED] Emne

SV: Unable to backup Netware 6 SP 2 Cluster volumes located on 2105 ESS

Hi Peter (and Rafael) The patch mentioned is allready obsolete, the latest update is called TSA5UP10 Regards Flemming -Oprindelig meddelelse- Fra: Rafael Mendez [mailto:[EMAIL PROTECTED]] Sendt: 23. august 2002 08:46 Til: [EMAIL PROTECTED] Emne: Re: Unable to backup Netware 6 SP 2

SV: question about Netware 6 and Groupwise TSA/GWTSA

can mail it to you. So still waiting on the answer on support on GWTSA.NLM (which by the way is supported both by CA and Veritas...). Regards Flemming Hougaard -Oprindelig meddelelse- Fra: Peter Pijpelink - P.L.C.S. BV Storage Consultants [mailto:[EMAIL PROTECTED]] Sendt: 22. juli 2002

SV: Questions concerning Netware backups

at the following TID: http://support.novell.com/cgi-bin/search/searchtid.cgi?/10070753.htm Good luck ;-) Flemming Hougaard -Oprindelig meddelelse- Fra: Guillaume Gilbert [mailto:[EMAIL PROTECTED]] Sendt: 12. juli 2002 16:20 Til: [EMAIL PROTECTED] Emne: Questions concerning Netware backups Hi all

SV: include/exclude question

Hi That will be a diffícult solution... just use: exclude c:\...\* include c:\abc\abc.txt mgtname that will work Regards Flemming -Oprindelig meddelelse- Fra: Dirk Kastens [mailto:[EMAIL PROTECTED]] Sendt: 25. juni 2002 09:12 Til: [EMAIL PROTECTED] Emne: Re: include/exclude question

SV: NDS Backup Question

Hi Cory you add the following exclude statement to your DSM.OPT - it will work ;-): EXCLUDE.DIR NDS:.O=HMC.OU=Groupwise.NLS:Publisher=Novell+NLS:Product=NetWare 5 Server+NLS:Version=510 Regards Flemming -Oprindelig meddelelse- Fra: Cory Heikel [mailto:[EMAIL PROTECTED]] Sendt: 12.

Support for GWTSA.NLM?

is in pipeline? Best regards Flemming Hougaard

Support for GWTSA.NLM?

smime.p7m Description: application/pkcs7-mime

SV: Sloooow Novell Backups

smime.p7m Description: application/pkcs7-mime

TSM NDS

Hi all I'm having a couple of questions regarding TSM and NDS on a NetWare Server. 1) When encrypting with the Client 4.2.1, is there a way to include the NDS in the encryption? 2) Recently I have noticed a couple of times, where the backup of the server holding the master replica was

NetWare, Compression Slow Backups

regards Flemming Hougaard

Server Specific Info Management Class on NetWare

Hi I'm having some problems with the TSM NetWare Client 4.2.1. No matter what I try, I can't seem to attach a specific Management Class to the Server Specific Info in the DSM.OPT file. I have been able to set a specific management class on the filesystem, and the NDS by using the following