I had a similar problem with tapes volumes and the AUDIT VOL xxx
FIX=YES repaired it. This might be an avenue to search further.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Svetoslav Tolev
Sent: Friday, January 19, 2007 12:44 PM
To:
I am still working understanding why my TSM DB continues to grow and
think I may have come upon something. I have many retention policies in
the management class for all my file servers. The goal was to keep most
data for only 90 days after it was deleted and to keep 90 versions if it
was a file
Can anyone please tell me if there is a command to look at all my nodes
and display which might be using a particular management class's backup
group ?
Thanks,
Ralph
_
From: Levi, Ralph
Sent: Wednesday, August 02, 2006 9:00 AM
Good day all.
Do anyone have a script that will dump or analyze the tsm catalog (tsm
5.2.7 - aix 5.3). My catalog is growing about 1% daily currently 45MB
and I have not changed any management classes. My servers being backed
up are mature so they reached the point the generally when
extra versions - 90
retain only version - 90
(for the 9 day retention, change 90 to 9).
Backups of databases and incrementals of everything else are run
nightly.
_
From: Levi, Ralph
Sent: Thursday, July 20, 2006 7:39 AM
To: 'ADSM: Dist
Hi All,
I am running TSM 5.2.7 on AIX 5.3 and a remote client running 5.3.4 on
W2K. I have two problems that are probably related. Perhaps someone
has seen this and could help clue me in.
My nightly incremental backup always fails with the following message:
dsmsched.log
--- SCHEDULEREC
In an attempt to tune our system (AIX 5.3, TSM 5.2.7) we changed the
following AIX parameters and now several archive jobs tend to just die
and hangout until they timeout.
sb_max = 2097152
tcp_sendspace = 262144
tcp_recvspace = 262144
udp_sendspace = 131072
udp_recvspace = 131072
rfc1323= 1
: [EMAIL PROTECTED]
Tel : 021 - 658 1694
Fax : 021 - 658 1699
Mobile : 082 - 653 8164
Dis altyd lente in die hart van die mens wat God
en sy medemens liefhet (John Vianney).
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Levi, Ralph
Sent
Gbit LAN.
40 GB/hour is rather the order of magnitude for a dedicated 100 Mbit LAN, but
tranferring a lot of small files will cause rather a lot of overhead.
Best regards,
Kurt
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Levi, Ralph
Sent
Thanks Dirk. Here is what I get. Am I missing some kind of driver
perhaps ?
[EMAIL PROTECTED]:/ # lsattr -R -l ent0 -a media_speed
10_Half_Duplex
10_Full_Duplex
100_Half_Duplex
100_Full_Duplex
Auto_Negotiation
Ralph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
rather
than prevailing setting.
Use: lsattr -E -l ent0 -H
Whereas the initial goal was to achieve greater throughput with gige,
pursue Jumbo Packets if you haven't already.
Richard Sims
On May 2, 2006, at 7:51 AM, Levi, Ralph wrote:
Thanks Dirk. Here is what I get. Am I missing
-
From: Levi, Ralph
Sent: Tuesday, May 02, 2006 8:02 AM
To: 'ADSM: Dist Stor Manager'
Subject: RE: archive hangs
Here is the result:
attribute valuedescription
user_settable
alt_addr 0x Alternate ethernet address
True
busintr147 Bus
Subject: Re: archive hangs
On May 2, 2006, at 8:30 AM, Levi, Ralph wrote:
ANS1809E Session is lost; initializing session reopen procedure.
Ralph - That message form makes the situation even more interesting...
The last time we saw that form of the ANS1809* message was in TSM 4.2
as a too-small
timeout value. If the server didn't do it, then it's the networking
in between the two, which returns us to your changed server OS settings.
Richard Sims
On May 2, 2006, at 9:14 AM, Levi, Ralph wrote:
Hi Richard,
We are running one 4.x client and all the others at 5.x.
Sorry I
I am running a tsm 5.2.7 (AIX) server and W2K3 client w/tsm 5.3 . I
originally was backing up everything with a 90 day retention class but
now I have some specific files that I only want keep for 9 days. I
added an include statement for just the 2 directory structures I want
changed and left the
an incremental to make them get rebound to
the new MC.
Ben
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Levi, Ralph
Sent: Friday, April 07, 2006 10:33 AM
To: ADSM-L@VM.MARIST.EDU
Subject: rebinding file backups
I am running a tsm 5.2.7 (AIX) server
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
Of
Levi, Ralph
Sent: Tuesday, February 14, 2006 1:08 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Tape Question 3592 and 3590 drives
Hi All,
Sorry to drag this back up but I
Hi All,
Sorry to drag this back up but I don't see a final answer. I have just
added an additional frame to my library containing 3592 (Jaguar) drives.
I added an additional devclass to support the new drives. I defined the
new drives and paths. Both drives and paths are online. When I try to
I am running tsm 5.2.6 on AIX 5.2 backing up a W2k server with 5.3.013
client. This is a huge file server running with journaling turned on.
For some reason it spawns multiple sessions during the backup process.
I've seen as many as 21 started throughout the backup session. I do not
have
I remember reading about being able to do backups to a primary and copy
storage pool concurrently but I can't find this info anymore. Is anyone
doing this ? Can you please point me to the manual / command to set
this up. I am running TSM 5.2.6 (AIX) with 5.2 and 5.3 clients (AIX,
Windows and
I am running tsm 5.2.6 on AIX 5.2 and keep getting the following
messages. (node in question is w2k - tsm 5.3.015)
ANR1171W Unable to move files associated with node WDBSSFS03, filespace
\\wxxx03\d$ fsId 2 on volume 003431 due to restore in progress.
(SESSION: 56199, PROCESS: 1793)
ANR1153W Move
Berbee Information Networks
Office 262.521.5627
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Levi, Ralph
Sent: Thursday, September 29, 2005 1:47 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: Invalid verb received causing rc=12
I just upgraded
Does anyone have an idea what could be causing this error. I don't see
anywhere what the object is that could be causing this problem or and
indication of some other issue on the system.
Client - w2k running 5.1.7
Server - AIX 5.2 running 5.2.6 TSM
09/29/2005 00:39:33 sessRecvVerb(): Invalid
).
_
From: Levi, Ralph
Sent: Thursday, September 29, 2005 10:10 AM
To: 'ADSM: Dist Stor Manager'
Subject: Invalid verb received causing rc=12
Does anyone have an idea what could be causing this error. I don't
see anywhere what the object is that could be causing
Hi All,
We recently upgraded from TSM 5.1.x to 5.2.6 (on AIX 5.2) and now notice
that our tape library is about to run out of space. I did a manual
inventory and compared it to the storage pools and see that there about
250 more tapes in the physical library than TSM is accounting for
(storage
[mailto:[EMAIL PROTECTED] On Behalf Of
Ben Bullock
Sent: woensdag 21 september 2005 16:23
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TAPE EMERGENCY
How about an audit library ...?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Levi, Ralph
Sent
Has anyone seen something like this ? It does not consistently occur on
this particular file. Today it could be this and tomorrow it could be
another file. I can back up this file if I select it by itself or with
other files. This failure occurs when doing an incremental. In fact,
the file
I am running TSM 5.1.9 on AIX 5.2 and did some EXPORT NODEs to save
some important data forever. When I went to retrieve it 5 months
later it was gone. The tapes were overwritten. No info was in volhist
either. I run: DELETE VOLHIST TYPE=ALL TODATE=TODAY-90 to keep
the volume history
Has anyone seen this running TSM 5.2.3 Linux client on vmware server
(Linux host server backup)
04/27/05 14:40:58 TransErrno: Unexpected error from open, errno = 16
04/27/05 14:41:00 ANS1028S Internal program error. Please see your
service representative.
04/27/05 14:41:00 ANS1512E
I know that client systemstate backups are not supported with Tivoli
Storage Manager 5.1 but has anyone found a way around this ? I am stuck
on TSM 5.1 for a few more months but need to get systemstate backups
from my W2K3 clients.
Thanks for any help,
Ralph
I just installed a tsm 5.2 client on a Windows 2003 box and get this
message.
ANS5186E Server is downlevel, System Services and System State backup
disabled for this session.
My TSM server is running 5.1.9 (AIX 4.3.3). I found a comment on google
to use backupregistry no but that didn't help.
I am looking for suggestions for saving data (db's and the like) for
long periods of time. Our problem is servers go EOSL (end of service
life) and we build newer ones but usually with different names, and
can't do a simple rename in TSM because both old and new server will
coexist for an
I am at a disaster recovery site (doing a test thank goodness) and I
need to stop all the administrative schedules from running. Can someone
please pass along the commands to do so. I don't have a pc / gui on the
system at the moment to do it that way. TSM 5.1.9 - AIX 4.3.3.
Thanks,
Ralph
Hi all,
It appears my offsite non-collocated tape pool has more filling tapes
than it has in the past. Does anyone know if tapes in a status of
filling are being reclaimed or are only tapes in full status put in
the reclamation process? I run reclamation with a threshold of 70 and
there are
Hi all,
I am currently at a disaster recovery test and am having a problem
finding my TSM DB tape. The DRM plan is calling for a tape that doesn't
appear to be here. I just upgraded a month ago to tsm 5.1.9 (AIX
4.3.3). Does anyone know what the command is to see what tapes are DB
backup tapes
-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Levi, Ralph
Sent: Monday, October 04, 2004 11:44 AM
To: [EMAIL PROTECTED]
Subject: disaster recovery test
Hi all,
I am currently at a disaster recovery test and am having a problem
finding my TSM DB tape. The DRM plan
I am running TSM 5.1.9 on AIX 4.3.3 . My primary disk pool is 490GB
with the himig=95, lowmig=90 and migprocess=1 . Occasionally, I hit the
95% mark before the normal scheduled migration takes place. When that
happens the automigration starts and I would expect it to stop once it
gets below the
Also note that the TDP has its own scheduler task that reads a dsm.opt
file from the tdpexchange subdirectory. This scheduler task is in
addition to the regular tsm scheduler.
Ralph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Del Hoobler
Sent:
Rick,
You might want to check your Maximum Size Threshold on your disk storage
pools. If files are larger than the max, they will go directly to your
primary sequential pool and bypass the disk pool (and therefore not get
to the copy tape pool until the tape to tape runs).
Ralph
-Original
I am running: dsmserv auditdb diskstorage fix=yes (told to do so by the
support center). I keep getting the same message ANR4306I without
anything incrementing.
Has anyone seen this? Am I in for a long day?
Running TSM 5.1.9.0 on AIX 4.3.3.10 .
ANR4140I AUDITDB: Database audit process
Richard,
Thanks for the quick response. This sure sounds like my problem as I am
at the 5.1 level. I guess I have no choice but to kill (cntl-c) out of
the audit and make sure my system comes back up. Any thoughts?
Thanks,
Ralph
-Original Message-
From: ADSM: Dist Stor Manager
Good morning.
I picked one file from yesterday afternoon's backup that is consistently
being backed up but not changing. I ran this command this morning:
dsmc incremental e:\Install\ShipNet\qrp\letter\Inv_sea2.qrp
-traceflags=policy,fioattribs -tracefile=dsmc.trc
It backed it up again.
Good Morning Richard,
I don't see anything pertinent in the dsmerror.log or dsmsched.log. The
opt (tsm server) and inclexcl looks clean but I attached them if you
want a peek.
My search continues. Thanks for the hints however.
Ralph
-Original Message-
From: ADSM: Dist Stor
Does anyone know why I am seeing these messages:
08/12/2004 03:48:43 Successful incremental backup of
'\\server001\e$\Users\NRodier\WoodMac CAT\*'
08/12/2004 03:48:58 Successful incremental backup of
'\\server001\e$\Users\PCampisi\tsy\*'
Instead of:
Successful incremental backup of
I've been looking and looking but don't see how they are being targeted
even before I sent out my question. The schedule is squeaky clean. I
even created a brand new schedule just for this one and ran it this
afternoon. The same thing happened.
I will keep looking and thanks for responding.
Has anyone seen a situation where the archive attribute gets turns on
but the data hasn't changed ? I have a server that appears to have this
problem. I don't see any scheduled tasks running that could cause this.
It happens weekly and causes havoc on my incremental. I also see files
that have
Here is an example of what I am seeing. I can't explain why it is
backing up everything over and over and over again. (fyi..The date
April 28 is significant because the server was rebuilt on that day.)
Ralph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Try doing: audit vol xxx fix=yes
Ralph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Coats, Jack
Sent: July 30, 2004 1:09 PM
To: [EMAIL PROTECTED]
Subject: Tape issue
I have a tape that says it is empty if I do a 'q content', but it will
I tried the trace but didn't get any output from it. Here are the
statements I used:
testflag instrument:detail
testflag instrument:api
I see the dsminstr.report file but it has 0 bytes in it.
Ralph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
I have a windows 2000 clients (v5 sp 4 build 2195) running tsm 5.1.7
who's incremental backup never ends. Using the timestamps next to
message: ANS1898I , it is taking between 5 minutes and 1 hour to parse
through 500 files. I have 100+ other servers that take about 2/100 of a
second to pass
Hi Richard,
Thanks for your quick response. Unfortunately we reviewed everything
that is running on the box and came up with nothing. We also ran
performance monitor all night and all we see (especially during the long
waits) is that nothing is going on (memory, processing etc). Once we
start
Hi all,
I am running TSM 4.2.1 server on AIX 4.3.3 (yes, I know I am off
support) and I am getting these errors trying of migrate from disk
storagepool to tape copypool.
07/08/04 02:07:38 ANR0102E asalloc.c(5006): Error 1 inserting row in
table
AS.Segments.
*
-Original Message-
From: Levi, Ralph [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 08, 2004 2:26 PM
To: [EMAIL PROTECTED]
Subject: ANR0102E error
Hi all,
I am running TSM 4.2.1 server on AIX 4.3.3 (yes, I know I am off
support) and I am getting these errors
I need to keep a single backup for legal reasons of our oldest Exchange
DB full backup. Does anyone know how I can keep this without changing
my existing management class and normal backup retention ?
Thanks,
Ralph
Message-
From: Stapleton, Mark [SMTP:[EMAIL PROTECTED]
Sent: Monday, June 07, 2004 12:23 PM
To: [EMAIL PROTECTED]
Subject: Re: TDP for Exchange
From: Levi, Ralph [SMTP:[EMAIL PROTECTED]
I need to keep a single backup for legal reasons of our oldest
Exchange
DB full backup
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Stapleton, Mark
Sent: June 07, 2004 1:42 PM
To: [EMAIL PROTECTED]
Subject: Re: TDP for Exchange
From: Levi, Ralph [SMTP:[EMAIL PROTECTED]
I need to keep a single backup for legal reasons of our oldest
Of
Stapleton, Mark
Sent: 07 June 2004 18:23
To: [EMAIL PROTECTED]
Subject: Re: TDP for Exchange
From: Levi, Ralph [SMTP:[EMAIL PROTECTED]
I need to keep a single backup for legal reasons of our oldest
Exchange
DB full backup. Does anyone know how I can keep this without
changing
my existing
it would.
Best Of Luck
Tony
-Original Message-
From: Levi, Ralph [mailto:[EMAIL PROTECTED]
Sent: 07 June 2004 18:54
To: [EMAIL PROTECTED]
Subject: Re: TDP for Exchange - The answer is not nice!
Hi Tony,
Thanks for the response. I think I will try the export server
methodology first
I have a W2K client running TSM 5.1.6 located in a DMZ. We open our TCP
port for a given time period for the client to send its incremental to
the TSM server. After the port is closed I get the expected ANS1017E
Session rejected: TCP/IP connection failure except that I have coded a
retryperiod
I am running TSM 4.2.1 (upgrading in a month after our next disaster
recovery test) and noticed that our DB is now 95% full. I don't want to
have to expand it before the upgrade. Is there a utility that can be
run to make sure it is clean ?
Thanks,
Ralph
I have some application commands that must be run before backing up a
client (w2k server) and it's DB. I run this out off a .bat script that
I execute through the tsm backup schedule. The normal commands to
shutdown the db, the dsmc backup command and the db startup work just
fine in the script.
Try to do a checkout. I suspect it will not be found either, meaning
your tsm DB is not in sync with your library. Manually take the tape
out of the library and then check it in. You may also have to do an
audit on it once you check it in.
Ralph
-Original Message-
From: Merryman, John
[mailto:[EMAIL PROTECTED] Behalf Of
Levi, Ralph
Sent: Tuesday, November 25, 2003 10:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Reclamation Pr. Hanging
Try to do a checkout. I suspect it will not be found either, meaning
your tsm DB is not in sync with your library. Manually take the tape
out
I am using the TDP for R/3 and would like to see how many tapes are
being saved each night and ensure that the retention is set correctly
(and that the old database backups are expiring). Is there a command
that can be issued or gui option available?
Thanks,
Ralph
You might want to check and see that dirmc is set in your dsm.opt . You
may have many directory entries but not alot of data out there.
Ralph
-Original Message-
From: Debi Randolph [mailto:[EMAIL PROTECTED]
Sent: August 05, 2003 12:03 PM
To: [EMAIL PROTECTED]
Subject: Reclaimation of
try :
exclude.dir c:\backup*
Ralph
-Original Message-
From: Henrik Wahlstedt [mailto:[EMAIL PROTECTED]
Sent: July 23, 2003 6:01 AM
To: [EMAIL PROTECTED]
Subject: Exclude all?
Hello,
What is the correct exclude/include statement if I want to exclude
everything files, folders and
66 matches
Mail list logo
