. But I only see
network tranfer rate is very low (about 1-2 MB/s).
Is there method to improve peformance of TSM server ?
- Original Message -
From: Tab Trepagnier [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Tuesday, March 08, 2005 7:30 AM
Subject: Re: migration and backup
Iain
Laitram, L.L.C.
Iain Barnetson [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
03/04/2005 04:24 AM
Please respond to
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: migration and backup
I'm in a similar situation where my
Hi all,
I setup TSM ver 5.2 client on Win 2K that has more than 200 GB data,
But TSM server machine only 20 GB hard disk. So I configure Backuppool ---
Diskpool ---Tapepool.
Diskpool : 18 GB
High Migration Threshold : 80 %
Low Migration Threshold : 0 %.
People said when migration process is
]
Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
04/03/2005 10:15
Please respond to
ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
To
ADSM-L@vm.marist.edu
cc
Subject
migration and backup
Hi all,
I setup TSM ver 5.2 client on Win 2K that has more than 200 GB data,
But TSM server machine
Nghiatd,
Have your settings before during backup:-
High Migration Threshold : 80 %
Low Migration Threshold : 25 %.
Later , after backups are complete :-
High Migration Threshold : 0 %
Low Migration Threshold : 0 %.
to allow migration to tape to take place.
Bill
nghiatd [EMAIL
: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
John Naylor
Sent: 04 March 2005 10:17
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] migration and backup
Your disk pool is way too small.
It should be large enough to hold one night's backups If you can't do
that, set your hi mig
I use LTO Gen 2. Its read/write speed is 15-20 MB/s more than network speed
(100Mbps). So migration is faster than backup
- Original Message -
From: John Naylor [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Friday, March 04, 2005 5:16 PM
Subject: Re: migration and backup
Your disk
I have 2 drive LTO Gen 2. I also try backup directly to tape, but it is
very slow
- Original Message -
From: Iain Barnetson [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Friday, March 04, 2005 5:24 PM
Subject: Re: migration and backup
I'm in a similar situation where my primary stg
the problem is first migration, the backup was stopped. Although, diskpool
still has 20% capacity
02/03/2005 06:22:26 A1114I Waiting for mount of offline media.
02/03/2005 06:55:37 Retry # 1 Normal File-- 719,648,279
- Original Message -
From: Iain Barnetson [EMAIL PROTECTED]
To: ADSM
] migration and backup
the problem is first migration, the backup was stopped. Although,
diskpool still has 20% capacity
02/03/2005 06:22:26 A1114I Waiting for mount of offline media.
02/03/2005 06:55:37 Retry # 1 Normal File-- 719,648,279
- Original Message -
From: Iain Barnetson [EMAIL
-L@VM.MARIST.EDU
Sent: Friday, March 04, 2005 5:47 PM
Subject: Re: migration and backup
So the data was migrating from diskpool to tape?
Is it an offline tape that the error relates to?
Can you check your actlog for that time and see if it mentions looking
for a specific tape at that time, then see
to cope with the i/o demands made on it during the backup/migration.
Can you see how far into the backup job these errors are occurrring, how
much data has been backed up to the 20Gb disk when these errors occur.
Is it occcurring around the point where the disk reaches 80% and starts
migrating?
I
I use LTO Gen 2. Its read/write speed is 15-20 MB/s more than network
speed
(100Mbps). So migration is faster than backup
Maybe, but 20% of your 18gb pool is not a lot spare, and I do not think
you will get a continuous migration process anyway. It will reach zero and
then go all the way back to
Sascha,
I currently have a little problem understanding how the switch Migration
requires Backup works for my HSM-Client. I understand that a file can only
be
migrated to TSM when a Backup version of this file already exists on the
server.
Nope. If you define in your MGmtclass
Hi TSMer !
I currently have a little problem understanding how the switch Migration
requires Backup works for my HSM-Client. I understand that a file can only be
migrated to TSM when a Backup version of this file already exists on the
server. Am I right that I have 2 backups of the same file
TSMer !
I currently have a little problem understanding how
the switch Migration
requires Backup works for my HSM-Client. I
understand that a file can only be
migrated to TSM when a Backup version of this file
already exists on the
server. Am I right that I have 2 backups of the same
file
16 matches
Mail list logo