Re: Library not recognised - URGENT
Sujay What is the make and model of the new library and what version of TSM server are you running. Have you checked that the version of server you have supports your new library ? For Instance, the new IBM TS3310 is only supported a TSM versions 5.2.7.x and 5.3.2.x and above. Support matrix can be found at http://www-306.ibm.com/software/sysmgmt/products/support/IBM_TSM_Support ed_Devices_for_AIXHPSUNWIN.html Thanks Leigh -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Sujay Dinakar R. Sent: 14 November 2006 13:37 To: ADSM-L@VM.MARIST.EDU Subject: [SPAM: 14.000] [ADSM-L] Library not recognised - URGENT Dear All, Recently our IBL 3581 L17 Library is replaced with new one. after connecting the new library Tivoli is not able to recognise the library. Library status is Unknown it says Library intialization failed lb2.0.0.3 we had changed the SCSI ID of the library and tried, the library is defining correctly, where as the define path is giving I/O error. ***Log from the server 11/14/2006 13:07:57 ANR2017I Administrator ADMIN issued command: DEFINE LIBRARY lb4.0.0.3 libtype=scsi 11/14/2006 13:07:57 ANR8400I Library LB4.0.0.3 defined. 11/14/2006 13:07:57 ANR2017I Administrator ADMIN issued command: DEFINE PATH TSMSERVER lb4.0.0.3 srctype=server desttype=library device=lb4.0.0.3 11/14/2006 13:08:17 ANR8840E Unable to open device LB4.0.0.3 with error -1. 11/14/2006 13:08:17 ANR8418E DEFINE PATH: An I/O error occurred while accessing library LB4.0.0.3. 11/14/2006 13:08:17 ANR2017I Administrator ADMIN issued command: ROLLBACK Please any one guide me what should i do?? my entire backup is down??? Regards Sujay Dinakar .R
Re: Strange archive behavior SOLVED
I forgot to include the Archive Management Class in the archive statement: -ARCHMc=YEARLY Thank you Richard! I'm seeing some strange behavior on an archive I'm trying to perform Here's the scenario. I have a HUGE filesystem which I have restored from PITD 01/10/06 and am trying to archive Unfortunately, I didn't have the room to store it on the same system that it was requested from (node1) so I restored it to a different system (node2) From node2: I then tried to archive it using the system I requested it from by issuing the command: dsmc archive -virtualnode=node1 /d/bureau/prm/prod/data/* -subdir=yes -description=node1 year end PITD=01/10/06 It then starts asking me to insert tapes from the storage pool YEAR END 2003 which are stored on a shelf and have not been accessed since 01/10/2004 ??? Anyone know where I can start looking? Thanks! Dave Zarnoch [EMAIL PROTECTED] Dave Zarnoch [EMAIL PROTECTED] _ Find a local pizza place, music store, museum and morethen map the best route! http://local.live.com?FORM=MGA001
Library not recognised - URGENT
Dear All, Recently our IBL 3581 L17 Library is replaced with new one. after connecting the new library Tivoli is not able to recognise the library. Library status is Unknown it says Library intialization failed lb2.0.0.3 we had changed the SCSI ID of the library and tried, the library is defining correctly, where as the define path is giving I/O error. ***Log from the server 11/14/2006 13:07:57 ANR2017I Administrator ADMIN issued command: DEFINE LIBRARY lb4.0.0.3 libtype=scsi 11/14/2006 13:07:57 ANR8400I Library LB4.0.0.3 defined. 11/14/2006 13:07:57 ANR2017I Administrator ADMIN issued command: DEFINE PATH TSMSERVER lb4.0.0.3 srctype=server desttype=library device=lb4.0.0.3 11/14/2006 13:08:17 ANR8840E Unable to open device LB4.0.0.3 with error -1. 11/14/2006 13:08:17 ANR8418E DEFINE PATH: An I/O error occurred while accessing library LB4.0.0.3. 11/14/2006 13:08:17 ANR2017I Administrator ADMIN issued command: ROLLBACK Please any one guide me what should i do?? my entire backup is down??? Regards Sujay Dinakar .R
Re: Library not recognised - URGENT
Did you research the ANR8840E error on the IBM site? Technote 1084114 likely addresses the issue. When you implement New hardware, you may well need New software. Richard Sims
Re: The new AIX journaling daemon and client crashes
On Mon, 13 Nov 2006 16:01:57 -0600, Mark Stapleton [EMAIL PROTECTED] said: [ Crash crash crash ] Anyone seen anything like this? Here are the notes in the status log I keep for my open PMRs. My business partner is theoretically nudging support too. 62069 442 000: Crash in journal-based-backup. Crashed TSM2! 2006-08-09: opened 2006-08-12: POssible fix. D'oh, crashed usenet! 2006-09-18: Here's a development library. Give it a shot 2006-09-19: D'oh, crashed usenet! Back in development again. 2006-09-17: D'oh, crashed usenet! Back in development again. 3006-10-04: Got the new version in, seems to be OK. 2006-10-07: D'oh, crashed usenet! Grumble. 2006-10-10: Not a filepath problem; punt to AIX. 2006-10-10: No, it's a filepath problem. Back in development. 2006-10-18: No particular update. 2006-10-25: No particular update. After the first crash, the box I offered up is our USENET server. While technically a production service, it presents the least disruption of any box we might choose to crash; so I'm willing to try experimental stuff on it. The first time, it got my TSM server hardware, with all 10 TSM server processes on it. I was Not Pleased at that point, I tell you. ;) Ran the code uneventfully for a few weeks on a test box before we got to this point. - Allen S. Rout
Re: setting up TDPO / newbie help
hi i got some output ... [EMAIL PROTECTED] cat SDPSI_rman.log Recovery Manager: Release 9.2.0.7.0 - 64bit Production Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved. connected to target database: SDPSI (DBID=2754641404) using target database controlfile instead of recovery catalog RMAN run 2 { 3 allocate channel ch_1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)'; 4 backup (tablespace 'TOOLS'); 5 } 6 RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of allocate command on ch_1 channel at 11/14/2006 16:00:25 ORA-19554: error allocating device, device type: SBT_TAPE, device name: ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer IBM AIX RISC System/6000 Error: 106: Reserved errno was encountered Additional information: 7011 ORA-19511: Error received from media manager layer, error text: SBT error = 7011, errno = 106, sbtopen: system error Recovery Manager complete. [EMAIL PROTECTED] can someone tell me what is channel ?? thanks - Original Message - From: Choudarapu, Ramakrishna (GTI) [EMAIL PROTECTED] To: ADSM-L@VM.MARIST.EDU Sent: Monday, November 13, 2006 3:42 PM Subject: Re: setting up TDPO / newbie help Goran, What are the contents of your tdpo.opt, dsm.opt and dsm.sys? Also, where are they placed? Seems, there is some inconsistency in the option file path, while looking at the line in tdpoerror.log: 11/13/2006 14:41:34 TID778564 == ANU2615E Options file '/usr/tivoli/tsm/oracle/bin64/tdpo.opt' not found. But, you are using the tdpo.opt from /usr/tivoli/tsm/client/oracle/bin64/tdpo.opt...! Regards, Rama -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of goc Sent: Monday, November 13, 2006 8:49 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] setting up TDPO / newbie help hi, i'm running this ... ./tdpoconf SHOWENV -TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt -OUTF=out.log but i constantly get IBM Tivoli Storage Manager for Databases: Data Protection for Oracle Version 5, Release 3, Level 3.0 (C) Copyright IBM Corporation 1997, 2006. All rights reserved. ANS1035S (RC406) Options file '*' could not be found. # the content of install dir ... # pwd /usr/tivoli/tsm/client/oracle/bin64 # ls -lrt total 4560 -rwxr-xr-x 1 bin bin 691 May 26 03:19 tdpo.opt.smp64 -rwxr-xr-x 1 bin bin 825939 May 26 03:26 libobk64.a -rwxr-xr-x 1 bin bin 757873 May 26 03:27 tdposync -rwxr-xr-x 1 bin bin 727710 May 26 03:27 tdpoconf drwxr-xr-x 2 root system 256 Nov 13 13:14 en_US -rwxr-xr-x 1 root system 779 Nov 13 14:34 NEW_tdpo.opt -rwxr-xr-x 1 root system 691 Nov 13 14:36 tdpo.opt -rw--- 1 root system 589 Nov 13 14:43 tdpoerror.log # # cat tdpoerror.log 11/13/06 14:43:46 TID778586 == ANS1035S (RC406) Options file '*' could not be found. 1/13/2006 14:12:04 TID839956 == ANU2615E Options file 'dsm.opt' not found. 11/13/2006 14:14:11 TID618804 == ANU2615E Options file '/tdpo.opt' not found. 11/13/2006 14:36:54 TID704968 == ANU2615E Options file '/usr/tivoli/tsm/oracle/bin64/tdpo.opt' not found. 11/13/2006 14:39:15 TID389582 == ANU2615E Options file '/usr/tivoli/tsm/oracle/bin64/tdpo.opt' not found. 11/13/2006 14:41:34 TID778564 == ANU2615E Options file '/usr/tivoli/tsm/oracle/bin64/tdpo.opt' not found. what am i doing wrong ? the pdf is confusing very much , for example : ...Specify the complete path to the Tivoli Storage Manager client user options file (dsm.opt) used during the Data Protection for Oracle session. If you do not specify this option... that means that dsm.sys is not looked for ? do i have to put something into /opt/tivoli/tsm/client/api/bin dir ? thanks, goran AIX 5.3 TSM 5.3 client 5.3 tdpo 5.3 If you are not an intended recipient of this e-mail, please notify the sender, delete it and do not read, act upon, print, disclose, copy, retain or redistribute it. Click here for important additional terms relating to this e-mail. http://www.ml.com/email_terms/
Re: setting up TDPO / newbie help
On Nov 14, 2006, at 10:06 AM, goc wrote: ORA-19511: Error received from media manager layer, error text: SBT error = 7011, errno = 106, sbtopen: system error Goran - See that msg in the TSM Wiki or ADSM QuickFacts. The 106 should be API error DSM_RC_ACCESS_DENIED, meaning denied due to improper permission. Richard Sims
Re: Library not recognised - URGENT
Thanks Richard, Dear Mr.Richard, Thanks for your comments, I forgot to update the drivers for the library, i had downloaded the drivers and updated after that the library is now recognised and working fine. thanks for every one who has given me valuable suggessions. Regards Sujay Dinakar .R - Original Message From: Richard Sims [EMAIL PROTECTED] To: ADSM-L@VM.MARIST.EDU Sent: Tuesday, November 14, 2006 7:26:32 PM Subject: Re: Library not recognised - URGENT Did you research the ANR8840E error on the IBM site? Technote 1084114 likely addresses the issue. When you implement New hardware, you may well need New software. Richard Sims
IE 7 browser with web interface
Has anyone tested the unsupported web interface with IE 7 browser? I had some problems with the targeted windows. Clicks on list items shows up in the wrong window.
How to calculate the thoughput on the network
Hi I need to configure a node for backup through WAN. And they want to know the throughput on the network The data on the node = 20GB Could any of you tell how to calculate the throughput on the network ? Thanks in advance Regards Palani This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
Re: How to calculate the thoughput on the network
Hi, And your slowest WAN connection is capable to do how much GB/Hour Mb/Sec? If you want to predict some number, you will need this info. If you must have it after the back-up, it's in the back-up report generated after each back-up (dsmsched.log). Regards, Karel -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Murugan, Palani Sent: dinsdag 14 november 2006 18:20 To: ADSM-L@VM.MARIST.EDU Subject: How to calculate the thoughput on the network Hi I need to configure a node for backup through WAN. And they want to know the throughput on the network The data on the node = 20GB Could any of you tell how to calculate the throughput on the network ? Thanks in advance Regards Palani This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies. ÿþD i t b e r i c h t i s v e r t r o u w e l i j k e n k a n g e h e i m e i n f o r m a t i e b e v a t t e n e n k e l b e s t e m d v o o r d e g e a d r e s s e e r d e . I n d i e n d i t b e r i c h t n i e t v o o r u i s b e s t e m d , v e r z o e k e n w i j u d i t o n m i d d e l l i j k a a n o n s t e m e l d e n e n h e t b e r i c h t t e v e r n i e t i g e n . A a n g e z i e n d e i n t e g r i t e i t v a n h e t b e r i c h t n i e t v e i l i g g e s t e l d i s m i d d e l s v e r z e n d i n g v i a i n t e r n e t , k a n A t o s O r i g i n n i e t a a n s p r a k e l i j k w o r d e n g e h o u d e n v o o r d e i n h o u d d a a r v a n . H o e w e l w i j o n s i n s p a n n e n e e n v i r u s v r i j n e t w e r k t e h a n t e r e n , g e v e n w i j g e e n e n k e l e g a r a n t i e d a t d i t b e r i c h t v i r u s v r i j i s , n o c h a a n v a a r d e n w i j e n i g e a a n s p r a k e l i j k h e i d v o o r d e m o g e l i j k e a a n w e z i g h e i d v a n e e n v i r u s i n d i t b e r i c h t . O p a l o n z e r e c h t s v e r h o u d i n g e n , a a n b i e d i n g e n e n o v e r e e n k o m s t e n w a a r o n d e r A t o s O r i g i n g o e d e r e n e n / o f d i e n s t e n l e v e r t z i j n m e t u i t s l u i t i n g v a n a l l e a n d e r e v o o r w a a r d e n d e L e v e r i n g s v o o r w a a r d e n v a n A t o s O r i g i n v a n t o e p a s s i n g . D e z e w o r d e n u o p a a n v r a a g d i r e c t k o s t e l o o s t o e g e z o n d e n . T h i s e - m a i l a n d t h e d o c u m e n t s a t t a c h e d a r e c o n f i d e n t i a l a n d i n t e n d e d s o l e l y f o r t h e a d d r e s s e e ; i t m a y a l s o b e p r i v i l e g e d . I f y o u r e c e i v e t h i s e - m a i l i n e r r o r , p l e a s e n o t i f y t h e s e n d e r i m m e d i a t e l y a n d d e s t r o y i t . A s i t s i n t e g r i t y c a n n o t b e s e c u r e d o n t h e I n t e r n e t , t h e A t o s O r i g i n g r o u p l i a b i l i t y c a n n o t b e t r i g g e r e d f o r t h e m e s s a g e c o n t e n t . A l t h o u g h t h e s e n d e r e n d e a v o u r s t o m a i n t a i n a c o m p u t e r v i r u s - f r e e n e t w o r k , t h e s e n d e r d o e s n o t w a r r a n t t h a t t h i s t r a n s m i s s i o n i s v i r u s - f r e e a n d w i l l n o t b e l i a b l e f o r a n y d a m a g e s r e s u l t i n g f r o m a n y v i r u s t r a n s m i t t e d . O n a l l o f f e r s a n d a g r e e m e n t s u n d e r w h i c h A t o s O r i g i n s u p p l i e s g o o d s a n d / o r s e r v i c e s o f w h a t e v e r n a t u r e , t h e T e r m s o f D e l i v e r y f r o m A t o s O r i g i n e x c l u s i v e l y a p p l y . T h e T e r m s o f D e l i v e r y s h a l l b e p r o m p t l y s u b m i t t e d t o y o u o n y o u r r e q u e s t
Re: IE 7 browser with web interface
Yes, I have tested it with some major flaws. I didnt expekt the web GUI to work with never version of IE and/or some function with Java since IE7 diplays Java in a diffrent way from IE6. However, Admin Center saves the day... Or to quote Andy, The command line is your friend. Both methods supported. //Henrik -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Gee, Norman Sent: den 14 november 2006 18:13 To: ADSM-L@VM.MARIST.EDU Subject: IE 7 browser with web interface Has anyone tested the unsupported web interface with IE 7 browser? I had some problems with the targeted windows. Clicks on list items shows up in the wrong window. --- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorised use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you.
SV: How to calculate the thoughput on the network
Hi Murugan, That is really hard to found out exactly speed and how long time it will take. Take the speed you got ex. 100 MBit and divide it with 8 then do you got maximum speed of your bandwidth. (12,5 MB/s) If you run Windows you should probably split it with 2 then you maybe got maximum speed from Windows. If you run compression then will you maybe get some better performance. But again it's hard to really find out exact speed and time you will get. Also the performance is also depending on if you backup to disk or tapepool, activity on the WAN link, also how old your server is and et c. Got this questions many times when I talk about CBMR for customers. Make a test on 1GB data and then see how long time that will take. Thanks Christian -Ursprungligt meddelande- Från: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] För Murugan, Palani Skickat: den 14 november 2006 18:20 Till: ADSM-L@VM.MARIST.EDU Ämne: How to calculate the thoughput on the network Hi I need to configure a node for backup through WAN. And they want to know the throughput on the network The data on the node = 20GB Could any of you tell how to calculate the throughput on the network ? Thanks in advance Regards Palani This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
scehdule deleted
is there anyway to find the associations to a schedule if a scedhule was deleted by mistake? -- Regards, Fawad Baig
Re: SV: How to calculate the thoughput on the network
If I remember well in the deployment guide it exists a table where it explains how you can calculate your LAN throughput: It says that you should consider from 40% to 80% of efficiency of your lan adaptor... of course you will have to search where are the bottlenecks of your LAN... take look of the deployment guide it explains many things about performance... hope it helps, Ibán Bernaldo de Quirós Márquez Technical Specialist cell: + 34 659 01 91 12 Sun Microsystems Iberia -Mensaje original- De: ADSM: Dist Stor Manager en nombre de Christian Svensson Enviado el: mar 14/11/2006 22:01 Para: ADSM-L@VM.MARIST.EDU Asunto: [ADSM-L] SV: How to calculate the thoughput on the network Hi Murugan, That is really hard to found out exactly speed and how long time it will take. Take the speed you got ex. 100 MBit and divide it with 8 then do you got maximum speed of your bandwidth. (12,5 MB/s) If you run Windows you should probably split it with 2 then you maybe got maximum speed from Windows. If you run compression then will you maybe get some better performance. But again it's hard to really find out exact speed and time you will get. Also the performance is also depending on if you backup to disk or tapepool, activity on the WAN link, also how old your server is and et c. Got this questions many times when I talk about CBMR for customers. Make a test on 1GB data and then see how long time that will take. Thanks Christian -Ursprungligt meddelande- Från: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] För Murugan, Palani Skickat: den 14 november 2006 18:20 Till: ADSM-L@VM.MARIST.EDU Ämne: How to calculate the thoughput on the network Hi I need to configure a node for backup through WAN. And they want to know the throughput on the network The data on the node = 20GB Could any of you tell how to calculate the throughput on the network ? Thanks in advance Regards Palani This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
Re: How to calculate the thoughput on the network
This will mostly be a function of the [avg latency/hop in WAN] and [# of hops in WAN] and [max throughput of slowest link in WAN] and [efforts made to tune packet size to avoid fragmentation - that is, adjusting packet MTU size to match WAN limitations]. For the last factor, if you're using Windows, or just for general information, see web pages that discuss DRTCP, a free Windows utility that allows easy access to various Windows settings in the Registry that control the TCP stack. Here's the fun part: Latency of any given hop in WAN will vary depending on load. If you have a exclusive link (like a point-to-point T1 or fiber link), then you have a much better chance of getting that reliable stats on latency than if you've got an IPSec VPN going over an Internet connection, because over the Internet you have no way of predicting load, unless you have an SLA with each entity between you and your destination. If your link is over an IPSec (or other) VPN over the Internet, I'd suggest multiple traceroutes over a period of time (days to weeks) to determine most likely route, including number and latency of hops. There's a tool called smokeping to automate and graph this, if you care to work with Open Source tools. Murugan, Palani said: | Hi | | I need to configure a node for backup through WAN. | | And they want to know the throughput on the network | | The data on the node = 20GB | | Could any of you tell how to calculate the throughput on the network ?
Fw: scehdule deleted
If you remember the schedule name, you can search the activity log on that, and see what nodes were associated to the schedule. Nick Cassimatis - Forwarded by Nicholas Cassimatis/Raleigh/IBM on 11/14/2006 06:23 PM - ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 11/14/2006 04:34:13 PM: is there anyway to find the associations to a schedule if a scedhule was deleted by mistake? -- Regards, Fawad Baig