many thanks for your input.
-mu
On Wed, Jul 8, 2009 at 9:59 PM, Thomas
Denierthomas.den...@jeffersonhospital.org wrote:
-madunix wrote: -
Am moving the Windows TSM server to a new network environment, what
is the procedure to change a TSM Server's IP address with a new IP?
Do you
We use LTO2 LTO3 in a 3584 and the CE always sets the serial number to
match the old one so that we don't have this problem, same as Sean.
Regards,
Jane.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Len Boyle
Sent: 08 July 2009 18:30
Hi Everyone,
This is more a AIX question then a TSM question.
But I wonder if their is any command such
cat /proc/scsi/scsi in AIX
or cat /var/log/messages |grep -i LTO
The reason why I'm asking is beause one of my tape drives it totally gone from
the AIX environment.
I run cfgmgr -v to
Hi Christian,
On AIX you can indeed use lsdev -Cctape to see your tape devices.
My best guess to what you describe is that the path from the drive to
the host is failing. So have a look a the library and all SAN components
to see if you can see the drive there.
Also is your TSM server a
Sounds like AIX has lost the drive, so duff drive, zoning etc...
You could do a cfgmgr -vl (name of fcs port the tape is down) to do a
quicker cfgmgr.
errpt -a will give you more info.
Have we got multiple drives down the same HBA? i.e. is the hba cable
good?
Steven
Steven Langdale
Global
Log onto your san switch and see if you see the tape drive connected on the
switch port it's attached to.
Rick
Christian
Svensson
Christian.Svenss To
o...@cristie.seADSM-L@VM.MARIST.EDU
Dumb ? - But I was under the impression that the TS3500 (3584)'s drive
Serial Numbers were tied to the Drive Cage (rail) so the SN and WWN were
static... Maybe I'm thinking 3494 w/ 3592 Drives.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
You are correct in that the TS3500 (3584)'s drive WWN are tied to the Drive
Cage. But the serial number goes with the drive. But the FE are supposed to
move the old drive's serial number into the replacement drives for LT03 and
higher.
-Original Message-
From: ADSM: Dist Stor
Sean,
Not much help to offer here but, I have been involved in many LTO drive
replacements in 3584s and have never changed any hardware serial number.
The only serial number that needs to change is the one TSM is using in its
drive definition which should automatically get picked up on the TSM
The trick is maintaining ownership of the tapes. Once the library manager is
moved you will need to checkin all of the tapes as private with the correct
owner to the new library manager. This will include all the tapes not
currently in the library.
I am not sure how to remove the other
Hello All,
Thanks for your help!!
Prior to TSM 6.1 IBM supplied n ODBC driver that was quite useful using
Excel as a front end. I am a UNIX guy but are found the Excel method very
useful in TSM instance analysis. I need the same capabilities for TSM 6.1
but cannot seem to get it to work. The
any backup, archive session can be canceled
1. open admin console (dsmadmc or a dmadmc.exe)
2. QUERY SESSION
3. CANcel SEssion [session_number]
+--
|This was sent by dem...@gmail.com via Backup Central.
|Forward SPAM to
Hi, found this, hope it will help
https://www.ibm.com/developerworks/wikis/display/tivolistoragemanager/TSM+V6.1+Mining+the+Database+Using+ODBC+or+Other+Connectors
Intellectuals solve problems; geniuses prevent them - Albert Einstein
Nicholas Rodolfich nrodolf...@cmaontheweb.com
Sent by:
NOW you tell me. I just went through a terrible time replacing a HP
LTO-4 drive in a library. After futzing around for several hours, I
wound up bouncing the TSM server. Other vendors (Sun/STC, HP...) aren't
sympathetic to requests to change the drive serial number.
I don't think serial number
I don't care if the serial number changes.
In one of the sites I manage, I have 47 drives in use by 1 library
manager, sharing them with 4 servers and 60 storage agents. This results
on more than 1400 paths defined on the library manager.
As each path must match the machine device, manually
I think this redpaper will help you :
IBM Tivoli Storage Manager: How to Migrate the Library Manager
Function - http://www.redbooks.ibm.com/redpapers/pdfs/redp0140.pdf
jmC
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Huebner,Andy,FORT
I've been following this thread and have a question about AUTODETECT:
I've seen this message:
ANR8955I Drive drive name in library library name with serial number serial
number is updated with the newly discovered serial number serial number .
as a result of having the drives defined with
Hi,
Thanks for your all help.
I only have VPN access to the server only. I hope to get access to everything
tomorrow so look around.
But I do get following error in errpt. When I google on that it tell me to
double check the FC cable. Will do that when I got a chance.
LABEL: FCA_ERR2
I've been asked to stop HSM clients migration jobs on a particular node. Can
anyone tell me how to do this. It's on a Windows NT platform.
CANCEL SESSION
How do you do this? I'm new to this!
+--
|This was sent by
I am looking for any TSM sites that backup Macs, that are using FileVault
to encrypt user data. We are trying to figure out a workable strategy for
backing up via TSM. If you are doing this, please contact me off-list.
--
Paul ZarnowskiPh: 607-255-4757
Manager,
On 9 jul 2009, at 22:13, Paul Zarnowski wrote:
I am looking for any TSM sites that backup Macs, that are using
FileVault
to encrypt user data. We are trying to figure out a workable
strategy for
backing up via TSM. If you are doing this, please contact me off-
list.
I just run dsmc one in
There must be a reason why sandiscovery defaults to off on non-windows
platforms.
Anyway, I think you're right and that *should* be the correct behavior
of SANDISCOVERY=ON.
However, I prefer to stick with persistent binding and tight control on
SAN changes. This way, I can at least avoid
New York Tivoli Storage Manager User Group
July 16th, 2009
Agenda: (subject to updates)
10:00 - 11:00 TSM Update/Road Map
11:00 - 12:00 TSM FastBack
12:00 - 1:00 Lunch
1:00 - 2:00 TSM 6.1 Upgrade - News from the front
2:00 - 3:00 TSM 6.1 Reporting
3:00 - 4:00 Group Roundtable
Meeting location:
I'm drawing a blank here, any suggestions welcomed.
I have a TSM customer who makes their copypool tapes using a TS3200 with
LTO4 drives.
The TS3200 is a rack-mounted, 2 drive, 40-mumble slot standard ASCII
library. No issues.
One copy pool, tapes vaulted and sent offsite.
They want to go to a
I will be out of the office starting 2009-07-10 and will not return until
2009-07-14.
For Urgent Technical worktasks, please contact Mikael Soderberg/Sweden/IBM
For Urgent Management worktasks, please contact Ralph
Johnson/Sweden/i...@ibmse
Off the top of my head, Wanda, I wonder if Gresham's library
virtualization software can make those four T3100s look like one
larger library?
This, of course, would be the responsibility of the DR site, not your
client, assuming the client's contract with the DR site is well
written
Just a
Wanda,
My solution isn't much better, but here goes:
1) Like you said, define 1 manual library, 1 device class, with 4 LTO4
drives, and get them all working and defined to the DR environment.
2) You will be using the IBM drives, of course, so I am presuming the
IBM drivers will be installed
Hello,
you can create 4 copypools instead of one. In this case you could use the 4
libraries in parallel.
Regards,
Fran
- Mensaje original
De: Wanda Prather wprat...@jasi.com
Para: ADSM-L@VM.MARIST.EDU
Enviado: viernes, 10 de julio, 2009 3:33:56
Asunto: Desperation, DR, and four
Thanks for the info.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Costa, Justino
Sent: Thursday, July 09, 2009 10:30 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Changing Library Client to Manager server...
I think this redpaper will
29 matches
Mail list logo
