Camilo,
I have a question, I am running out of physical space on my
3583 library, and I was wondering if there is a way of making
the 12 slots on the I/O station (Bulk), part of the regular
tape slots.
Yes, I've done this with our 3583. I can't tell you from the
top of my head what exactly I
You seem to do everything correct and if it does not work the best way is
to open a PMR with IBM. Try to rescreate the problem on another box.
Zlatko Krastev
IT Consultant
GUILLAUMONT Etienne [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
25.02.2003 09:01
Please
Matt,
- If you want to have the lowest possible number of tapes you should not
do any backups (single copy).
- If you want something quick, cheap and dirty - migration goes to one
primary pool, B/A client backups to another primary. Latter goes offsite
without any copypools (2 copies).
- If you
I had a simailar problem with DLT1 drives, There is an readme on the TSM
site how to update the TSM installation with the SHOW FORMATDLT1 admin
command with the UPDATEFORMAT parameter.
and UPDATE DEVCLASS DLT1 or DLT1C.
regards,
Jan Batteram
IT-Specialist
Royal Swets Zeitlinger
-Original
Hi Theresa,
I had similar problem. Check your LANG environment variable for user under
which you are running backup scripts (RMAN).
It should be equal to language used in TSM API.
For example:
if you have En_US subdirectory in TSM api client, your LANG variable have
to be LANG=En_US.
Hope this
Does this indicate a hardware error?
ANR8302E I/O error on drive MT1.0.0.2 (mt1.0.0.2)
(OP=READ, Error Number=1117, CC=305, KEY=00, ASC=00,
ASCQ=00,
SENSE=70.00.00.00.00.00.00.0E.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.,
I have a question, I am running out of physical space on my
3583 library, and I was wondering if there is a way of making
the 12 slots on the I/O station (Bulk), part of the regular
tape slots.
The manual, of all things, says you can...
via Setup-Utils-Config.
Hi,
If Tivoli discovers 'persistent' errors working with a drive, it will take
the drive offline, so it cannot 'accidentally' operate the drive for a
backup action.
I'd check to see if this happens with the same tape - that might indicate
that the tape is bad. I'm no expert on all those
We had a similar problem recently with one of our 3590 drives. In the end,
it turned out of the little brush that cleans the heads in the drive was
all but knackered. We had it replaced and it was fine again.
I would say it's most likely a drive problem of some sort rather then TSM
releated. As
Does this indicate a hardware error?
ANR8302E I/O error on drive MT1.0.0.2 (mt1.0.0.2)
(OP=READ, Error Number=1117, CC=305, KEY=00, ASC=00, ASCQ=00, ...
On the basis of the ASC and ASCQ values being 0, I would suspect
the problem to be a dirty tape head. Begin by assuring that the
drive is
The next question for me is how do I convert the IBM/Tivoli points to a real
license count that I can put on my server! I have been trying to get an
answer from my IBM rep for a couple of months!
--
Bruce Kamp
Midrange Systems Analyst II
Memorial Healthcare
Environment:
TSM client 5.1.5.6 on Netware 6
TSM server 5.1.1.6 on AIX 4.3.3
Trying to restore the directory vol1:\asset inventory from the command line
but can not figure out the correct syntax! I have tried the following
commands:
load dsmc res vol1:\asset inventory\ -subdir=yes -rep=all
Theresa--
this should help narrowing down where the problem is. Try running it to
the dummy disk first, then with the MML. If you still have problems,
holler-- I've been down this road before.
-lisa
Here is the technical document from the Oracle metalink site that talks
about Oracle 9i and
I am restoring the whole volume. It was blown away... So I can't see the
directory in any of these utils. I tried both of your suggestions no go
on both... I also tried vol1:\asset*\ that didn't work either. Any other
suggestions?
--
Bruce Kamp
Midrange
Mitch,
Just change line 75 of tsmscsi (it is just a shell script) from :
prefix=`rpm -q --queryformat %'{INSTALLPREFIX}' TIVsm-tsmscsi-5.1.6-0`
to :
prefix=`rpm -q --queryformat %'{INSTALLPREFIX}' TIVsm-tsmscsi-5.1.6-2`
Mitch Sako wrote:
The tsmscsi that is in 5.1.6.2 for Linux32 is not
Hi Bruce,
I'm not sure, but can you setup the client web-interface, then you could
browse your way to what you would like to restore, instead of using time
figuring out the cl syntax. Better to do that when an important restore
isn't hanging over your head.
Rgds
Geirr G. Halvorsen
-Original
Hi Bruce,
you can still use the Pick-List with the -pick option.
It's maybe a time-consuming task to scroll the pick list
on the command line, when there a lot of directories in
your volumes root, but it should work.
load dsmc res vol1:\ -pick -subdir=yes -rep=all -tapep=no
bye,
Wolfgang
Hi,
Several of our clients have upgraded their Domino servers to v5.0.11, and
the tdp promptly stopped working. The tdp worked fine with previous
versions of Domino on these servers. We have tried using the very latest
tdp version from the ftp site, but no success there.
The symptoms we see
I just got this error. The problem is with version 5.2 of groupshield. Even if
groupshield is deactivated we were getting this error. We had to completly deinstall
it to
get TDP working correctly. You can either go back to a previous version or wait for
5.2.1 which should correct the problem.
Anyone knows the link for the TDP for MS SQL version 5.1.5.0?
I've been working with IBm but they just gave the ftp link which anonymous
couldn't access.
Thanks,
Ed Moso
Just add DOMDSM and DOMDSMC to the excluded applications list under server
settings. We have been working fine with Domino 5.0.11 TDP 5.1.5.1 and
Groupshield 5.2 for a month and a half.
Greg Redell
Great-West Life Annuity Insurance Co.
Phone: 314-525-5877
Email: [EMAIL PROTECTED]
Don't try to
I found 1 big mistake! The directory is Asset Inventory Backup. But I
found the syntax is load dsmc res vol1:\asset inventory backup\
-subdir=yes -rep=all
--
Bruce Kamp
Midrange Systems Analyst II
Memorial Healthcare System
E: [EMAIL PROTECTED]
P: (954)
Ed,
I just obtained this with anonymous:
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/maintenance/tivoli-data-protection/ntsql/v515/nt/
Thanks,
Del
===
Anyone knows the link for the TDP for MS SQL version 5.1.5.0?
I've
Where is the best place for starting dsmcad during boot on AIX 4.3.3?
Like /etc/rc.d/rc.local for Linux
//Anders
I use /etc/inittab file to bring dsmcad with ONCE option.
Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
[EMAIL PROTECTED]
[EMAIL PROTECTED] 02/25/03 09:45AM
Where is the best place for starting dsmcad during boot on AIX 4.3.3?
Like /etc/rc.d/rc.local
Theresa,
The 2518 return code you are seeing means that the license file that Data
Protection for Oracle is picking up and reading is not a valid license
file for TDP Oracle. It could be that your license file was corrutped
during install?? Unfortunately, troubleshooting is very hard with Rman
Dear all
I've been running TSM for four years or so. When we use BACKUP STGPOOL to
copy a primary storage pool to a copy storage pool, I have relied on the
fact that a successful completion means I have two copies of all my data.
I've just discovered that a number of my files don't have a second
I did experience the same problem at a DR 3 years ago. What we found out
was our Daily Process was not working properly. The BACKUP STGPOOL was not
finishing to successful completion. Also, did a RESTORE STGPOOL COPYPOOL.
I usually run the restore a couple of months b4 DR to help sync things
Sylvia,
The first question is in regards to cleaning frequency?
How often do you clean this particular drive?
Sam.
- Original Message -
From: Sylvia Nergard [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, February 25, 2003 4:02 AM
Subject: ANR8302E error on drive
Does this
Kent,
Is there any type of Domino maintenance activity that might be
happening during the entire backup window? We have seen some
similar things when the Domino server was doing some maintenance
tasks during the backup window. DP for Domino scans all of the
databases, and gets the information
About half the machines in our central server domain are small and bound to
a small server management class by an option set. It looks like
0 include ?:* smallserver
1-37 exclude the usual suspects
38 include c:\adsm.sys\...\* smallserver
39 dirmc smallserver.
Sequence #s 0 and 39 do the right
We will be setting up a new cluster server running Win2k and MS
SQL 2000. We are at 5.1 on our TSM server.
We are backing up another cluster server running the same OS but
without any SQL on it. And we are backing up SQL 2000 running on a
non-cluster server. Both have the
This morning I upgraded to 5.1.6.2 server on AIX 4.3.3. The upgrade was from
V5.1.5.2, which went smooth. Will keep an eye out for any anomolies,
especially tonight being that's it's the first full load for backups.
Has anyone who upgraded recently noticed any issues that cause real
problems?
Thank you. I will give it a try when I can quiesce the server.
Mitch
Patrick Boutilier wrote:
Mitch,
Just change line 75 of tsmscsi (it is just a shell script) from :
prefix=`rpm -q --queryformat %'{INSTALLPREFIX}' TIVsm-tsmscsi-5.1.6-0`
to :
prefix=`rpm -q --queryformat
The number of possible Linux configurations is extremely limited. Two of them
involve enterprise Linux distros, including a SuSE one that I could not figure
out a way to buy. The RH enterprise offering requires a kernel that does not
ship with the product and it's a large task in itself to get
I would've logged a call with TSM support but I've already
got 2 PMR's open that they're not calling me back on. ;)
How do your help screens look?
Thanks;
Theresa
Theresa,
From my perspective help files look fine via the web interface and the CLI.
Geoff Gill
TSM Administrator
NT Systems
Hi *SM'ers
Is there a way to check in multiple new volumes (with barcodes) to a 3494 library as
scratch?
Tommy Templeton
Senior System Administrator
DFA-MMRS
601-359-3106
e-mail - [EMAIL PROTECTED]
checkin libv libname search=yes checkl=yes/no status=scratch
bob
On Tue, Feb 25, 2003 at 01:30:52PM -0600, Tommy Templeton wrote:
Hi *SM'ers
Is there a way to check in multiple new volumes (with barcodes) to a 3494 library as
scratch?
Tommy Templeton
Senior System Administrator
DFA-MMRS
checki libv libname sea=y devt=whatever stat=scr volr=1stbarcode,lastbarcode
At 01:30 PM 2/25/2003 -0600, you wrote:
Hi *SM'ers
Is there a way to check in multiple new volumes (with barcodes) to a 3494
library as scratch?
Tommy Templeton
Senior System Administrator
DFA-MMRS
601-359-3106
e-mail -
load them in the hopper and get them in the library 1st, before entering
the checkin command.
[EMAIL PROTECTED] 02/25/03 02:30PM
Hi *SM'ers
Is there a way to check in multiple new volumes (with barcodes) to a
3494 library as scratch?
Tommy Templeton
Senior System Administrator
DFA-MMRS
Interesting note about BMR. This might be old news, as the report is almost a
week old, but I don't recall seeing it sent out to the listserv.
http://seer.support.veritas.com/docs/252933.htm
Ben
Tommy,
Yup, the easiest way that I found to check in multiple new volumes to a 3494
library is creating a text file like below. Then log in to TSM and run a
macro against that file...show below too... Hopefully these tapes have
already been formatted.
$ more checkin
checkin libv ids01atl1
I just noticed late last night that the formatting of the TSM Server's help menus
are all messed up.
Doesn't matter if I go through the GUI or the CLI, I get the following:
tsm: C2TSMSERVhelp upd stg
UPDATE STGPOOL|
My LANG variable was set to en_US in both the ...api/bin directory as well as for
user:oracle.
We were able to backup RMAN to disk successfully.
As this is a new (replacement server) for one of our SP nodes, I copied the license
file from this SP node onto the new server and then
Ok guys don't laugh
I tried migrate my old adsm 3.1.2.42 server today. It's a small server with only 7
clients. On AIX 4.3.3. I installed 5.1.6.2 and everything was going fine until I tried
using the tape drives. Now these are very peculiar. They are 2 ESCON attached 3490
drives. (only 800 megs
Hi - can anyone provide insight on the configuration of client side multiple
fibre HBAs using fibre over IP?
Thanks,
Frank C.
Folks,
Does anyone know the how the following works for sure:
During library definition a read element status command is sent to the
library to help the definition process. Is a read element status then
issued during each subsequent library initialization (at startup) or is this
information
You got several answers, but I got questions for you.
1. Is the 3494 shared?
2. Do you know if the tapes are initialized?
If the 3494 is shared, you can't just do a search=yes because you may very
well get tapes that *shouldn't* belong to ITSM
If the tapes aren't initialized then you can't just
Dear TSMers,
We've encountered an environment which have 7 DMZ, with a total of 25 SUN
Servers (total with 250GB data) required backup. So in average, each DMZ
will require backup of 40GB data.
I'm thinking of building a dedicated backup network, say 100M Ethernet for
handling this traffic.
lookat the checkin libvolume command
checkin libv libname volr=lownumber,highnumber stat=scr dev=3590
[EMAIL PROTECTED] 02/25/03 02:30PM
Hi *SM'ers
Is there a way to check in multiple new volumes (with barcodes) to a
3494 library as scratch?
Tommy Templeton
Senior System Administrator
The first of these queries works. What is wrong with the second one? I've
been scratching my balding head and getting nothing but an itching scalp.
Thanks for you help! ... Jack
select platform_name as OS, -
client_os_level as OS_VER, -
node_name as Node, -
cast(cast(client_version as char(2))
According to the supported devices web page, this library isn't supported,
but you never know when the last time the page was updated. Does anyone know
if and what level of TSM supports this library with AIT-2 drives?
TIA,
Bill Boyer
Some days you are the bug, some days you are the windshield. -
Theresa,
Is your TSM Server an AIX machine ?
This is probably due to the fact you unzipped the file on a Windows
machine iso :
- ftp the package from your win machine to the AIX server (in bin format)
- gunzip the file on the AIX machine
- tar the file on th AIX machine
This should solve your
53 matches
Mail list logo