I had a simailar problem with DLT1 drives, There is an readme on the TSM site how to update the TSM installation with the SHOW FORMATDLT1 admin command with the UPDATEFORMAT parameter. and UPDATE DEVCLASS DLT1 or DLT1C.
regards, Jan Batteram IT-Specialist Royal Swets & Zeitlinger -----Original Message----- From: Zlatko Krastev/ACIT [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 25, 2003 9:54 AM To: [EMAIL PROTECTED] Subject: Re: Problem with Storagetek L20 and 5.1.6.2 You seem to do everything correct and if it does not work the best way is to open a PMR with IBM. Try to rescreate the problem on another box. Zlatko Krastev IT Consultant GUILLAUMONT Etienne <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 25.02.2003 09:01 Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject: Re: Problem with Storagetek L20 and 5.1.6.2 I upgraded 4.1.6 -> 5.1.5 ->5.1.6.0 ->5.1.6.2 I don't remember the version for the ITSM device driver as I went back but it was the latest available on the tivoli server. But there was something peculiar : when I issued an update all with the 5.1.5 cd, the devices were not updated and I had to specifically install it. To answer to you last question : I hope that the fact that the drivers doesn't function is not normal ! :-)) regards Etienne GUILLAUMONT e-mail : [EMAIL PROTECTED] RGB Technologie Parc d'Innovation, Bâtiment PYTHAGORE 11 Rue Jean SAPIDUS 67400 ILLKIRCH Tél : 03 90 40 60 60 Fax : 03 90 40 60 61 Zlatko Krastev/ACIT To: [EMAIL PROTECTED] <[EMAIL PROTECTED] cc: AL.NET> Subject: Re: Problem with Storagetek L20 and 5.1.6.2 Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 23/02/2003 22:25 Please respond to "ADSM: Dist Stor Manager" How you did the upgrade (4.1.6 -> 5.1.6.2 or 4.1.6 -> 5.1.0.0 -> 5.1.6.0 -> 5.1.6.2 or otherwise)? What is the fileset and version for the ITSM device driver? You hope wrong or you hope normal :-) Zlatko Krastev IT Consultant GUILLAUMONT Etienne <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 21.02.2003 15:07 Please respond to "ADSM: Dist Stor Manager" To: [EMAIL PROTECTED] cc: Subject: Problem with Storagetek L20 and 5.1.6.2 Hello, I juste upgraded my TSM server on AIX 4.3.3 to 5.1.6.2 from 4.1.6 and I had to reinstall the devices software at 4.1 level to have my Storagetek work. The library functionned but the DLT1 drives where unable to read tapes. I got the following message : 20.02.03 14:06:43 ANR8302E I/O error on drive DLT1.2 (/dev/mt1) (OP=SETMODE, Error Number=22, CC=207, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=Device is not in a state capable of performing request). Refer to Appendix D in the 'Messages' manual for recommended action. I just updated TSM to 5.1.6.2 and removed the drive and the library before recreating them. Did I do anything wrong or is it normal (I hope not) Regards Etienne GUILLAUMONT e-mail : [EMAIL PROTECTED] RGB Technologie Parc d'Innovation, Bâtiment PYTHAGORE 11 Rue Jean SAPIDUS 67400 ILLKIRCH Tél : 03 90 40 60 60 Fax : 03 90 40 60 61