Subject: Re: [ADSM-L] Damaged Files
Hello,
Have you tryed to restore from copy pool?
On Thursday, 4 May 2017, Plair, Ricky <rpl...@healthplan.com> wrote:
> Hey All,
>
> I have a Windows TSM server running 6.3.4.300. This server has
> thousands of damaged files from a power o
Hello,
Have you tryed to restore from copy pool?
On Thursday, 4 May 2017, Plair, Ricky <rpl...@healthplan.com> wrote:
> Hey All,
>
> I have a Windows TSM server running 6.3.4.300. This server has thousands
> of damaged files from a power outage we had a few months ago.
Hey All,
I have a Windows TSM server running 6.3.4.300. This server has thousands of
damaged files from a power outage we had a few months ago. Is there any way to
delete these files or get rid of these files?
If they are damaged they can't be used for anything like a restore anyway
Hi all,
After a mass restore attempt pulling from 800+ volumes I've got a bunch of
files from various volumes showing up with a show damaged, 452 bad bitfiles, of
which a whole lot more files impacted.
Is there a way to tell TSM to retry the reads of the bitfiles? When I try to
move data its
How do I restore damaged files on a Copy Storage Pool volume?
restore volume works from Copy to Primary only - How can I do this the
other way?
Many Thanks,
=Adrian=
Adrian Davis * System Administrator * SunGard Vivista *
(Unit 72) 1st Floor, Romer House, 132 Lewisham High Street, Lewisham
Subject: [ADSM-L] How do I restore damaged files on a Copy Storage Pool
volume?
How do I restore damaged files on a Copy Storage Pool volume?
restore volume works from Copy to Primary only - How can I do this the
other way?
Many Thanks,
=Adrian=
Adrian Davis * System Administrator * SunGard
:[EMAIL PROTECTED] On Behalf Of
Wilkinson, Brent
Sent: 20 August 2007 16:09
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] How do I restore damaged files on a Copy Storage
Pool volume?
Mark the volume destroyed then run a backup stg. This will replace the
files that no longer exist in the copy pool
Adrian,
Just delete the volume from the copy storage pool and TSM will takecare of
the rest. In short, TSM will backup the data from the primary pool to the
copy storage pool.
--Sunman
On 8/20/07, Davis, Adrian [EMAIL PROTECTED] wrote:
How do I restore damaged files on a Copy Storage Pool
: Re: [ADSM-L] How do I restore damaged files on a Copy Storage
Pool volume?
When I try to mark the volume as destroyed...
update volume lu0141 access=destroyed
...I get the following messages...
ANR2116E UPDATE VOLUME: Access mode for volume LU0141 cannot be changed
to destroyed - volume does
, August 20, 2007 11:15 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: How do I restore damaged files on a Copy Storage Pool volume?
When I try to mark the volume as destroyed...
update volume lu0141 access=destroyed
...I get the following messages...
ANR2116E UPDATE VOLUME: Access mode for volume
I think the supported way would be to Audit the volume in question with
fix=yes. When TSM finds the damaged files on the volume in question it
will delete them and they will be replaced on the next backup stg.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED
restore damaged files on a Copy Storage
Pool volume?
Mark the volume destroyed then run a backup stg. This will replace the
files that no longer exist in the copy pool.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Davis, Adrian
Sent: Monday
] On Behalf Of
Davis, Adrian
Sent: Monday, August 20, 2007 11:15 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: How do I restore damaged files on a Copy Storage Pool
volume?
When I try to mark the volume as destroyed...
update volume lu0141 access=destroyed
...I get the following messages...
ANR2116E UPDATE
You could try the SHOW command to query the whole tape pool
SHOW DAMAGED yourtapepoolname
just remember the show commands are not supported
Jim Armstrong
Storage Architect
Standard Life
On 21/03/2006 16:22:03 ADSM: Dist Stor Manager wrote:
Greetings,
Does anyone have a way to find damaged
Greetings,
Does anyone have a way to find damaged files on tape volumes without
querying content of every volume ( for example: q content xx
damaged=yes ) ?
Thank you.
Regards, John
On Mar 21, 2006, at 11:22 AM, John Bremer wrote:
Greetings,
Does anyone have a way to find damaged files on tape volumes without
querying content of every volume ( for example: q content xx
damaged=yes ) ?
John - There being no Damaged column value or enumtype in the SQL
lookups
wrote:
Greetings,
Does anyone have a way to find damaged files on tape volumes without
querying content of every volume ( for example: q content xx
damaged=yes ) ?
John - There being no Damaged column value or enumtype in the SQL
lookups available to us, we might start by looking
On Mar 21, 2006, at 12:13 PM, John Bremer wrote:
I'm wondering where we are getting output from the q content command?
There's far more going on in the server than we as customers will
ever know about. :-)
Richard Sims
Hi,
If you implemeted copy stg pools the audit vol fix=yes will only mark the
damaged files as damaged in the database. The restore vol will copy the
damaged files from copy stg pool volumes back into the primary pools and the
volume that countained the damaged files will be returned to scratch
After migrating our entire datastore from DLT to LTO2, I have discovered
a bunch of damaged files that did not migrate to their new storage pool
cleanly. (It's possible they may have been damaged already)
I started getting these errors, which I'd never seen before:
ANR1330E The server has
I had a tape set to read-only access Sunday due to
excessive read errors. I started an audit volume
yesterday about 1:00pm. It's still running as of
11:00 am, and has found about 30 damaged files so far.
I'm not pleased that the audit volume is still
running almost 24 hours later, but that's
Andy,
Recently we are seeing that quite a few tapes are going in to the error state and having damaged files. (Even before I can complete the stgpool backup.) Now these files need to be regenerated.Now, If I had a lookup table I could create a list of the damaged files thru one command instead
Select Gurus,
Please suggest a select statement for finding damaged files in a particular
volser.
I need to avoid q content volser damaged=yes.
Thanks.
Sumitro Chowdhury.
_
Get your FREE download of MSN Explorer at http
Stor Manager
To: [EMAIL PROTECTED]
cc:
Subject:Select statement for finding damaged files.
Select Gurus,
Please suggest a select statement for finding damaged files in a
particular
volser.
I need to avoid q content volser damaged=yes.
Thanks.
Sumitro Chowdhury
Hello,
I want to get information with select statement similar to:
query contents volume_name damaged=yes.
There is no column for damaged files with select * from contents.
Perhaps there is one someplace else ? (Not on select * from archives neither).
Thank you
25 matches
Mail list logo
