Re: [AFMUG] Do Vlans care about protocol?

I'm feeling a little better now that it's not me, I removed the uplink port on the CRS317 to the P2P from the bridge, and put the IPv6 address directly on that port, I still could not ping the other end. So that should have removed all the switch/vlan options and it would have just been a

Re: [AFMUG] Do Vlans care about protocol?

Hell if I know. I have my first set of CRS coming in. I dont know how much different switchos is than ROS. But historically, task specific software is always better. I'm just hoping wireless isnt on in every package. On Thu, Feb 18, 2021, 11:57 PM Nate Burke wrote: > Router OS. Just because I

Re: [AFMUG] Does anyone other than Onan make a decent mounted gas generator?

Do they give you a choice in dress color free with the Nissan? Or do they just assume pink is acceptable? On Thu, Feb 18, 2021, 11:37 PM Steve D wrote: > Anyone look into the F-150 with the built in generator? > > https://www.ford.com/trucks/f150/features/power/ > > The inverter that powered

Re: [AFMUG] Do Vlans care about protocol?

Router OS. Just because I know it better. In theory with the Hardware offloading, it should be the same, right? On 2/18/2021 9:30 PM, Steve Jones wrote: Are you running router OS or switch OS on the switch? On Thu, Feb 18, 2021, 9:06 PM Nate Burke > wrote:

Re: [AFMUG] Does anyone other than Onan make a decent mounted gas generator?

Anyone look into the F-150 with the built in generator? https://www.ford.com/trucks/f150/features/power/ The inverter that powered the outlet in the bed of my Nissan Titan was adequate to run power tools all day. I'd think something like the Ford would be even better for powering your trailers

Re: [AFMUG] Do Vlans care about protocol?

Are you running router OS or switch OS on the switch? On Thu, Feb 18, 2021, 9:06 PM Nate Burke wrote: > ROS 6.47.7 > > It's a production switch, so I'll have to change it around during a > maintenance window. The switch is passing several vlans between different > ports, but this is the first

Re: [AFMUG] Do Vlans care about protocol?

ROS 6.47.7 It's a production switch, so I'll have to change it around during a maintenance window. The switch is passing several vlans between different ports, but this is the first IPv6 traffic I'm putting through it. On 2/18/2021 8:22 PM, Jesse DuPont wrote: What RouterOS version is on

Re: [AFMUG] OT: getting old and angry

Lol On Thu, Feb 18, 2021, 5:39 PM Steve Jones wrote: > I've been considering trying dos xx, I been trying new beers, my miller > lite is getting too sweet, I found I like modelo negra quite well, but the > regular modelo is meh. I did find a place that sells the tecate about 35 > miles away,

Re: [AFMUG] Do Vlans care about protocol?

What RouterOS version is on your CRS317? In your third scenario, what happens if you turn off VLAN filtering in the Bridge's VLAN tab?  Jesse DuPont Owner

Re: [AFMUG] Do Vlans care about protocol?

The P2P provider is saying that they find no technical reason why the IPv6 traffic is not passing, and they're pointing to my equipment. I've plugged a couple more routers into the CRS317 to test with. What I found is that if I have the PVID set to the Vlan, and Admit all packets on the

Re: [AFMUG] OT: getting old and angry

I've been considering trying dos xx, I been trying new beers, my miller lite is getting too sweet, I found I like modelo negra quite well, but the regular modelo is meh. I did find a place that sells the tecate about 35 miles away, going to try that. I wish I knee for sure what my dad drank when I

Re: [AFMUG] OT Helicopter on Mars

It’s only got a 90 second flight time. So presumably it doesn’t get very far away. I would guess radio ranging and camera would allow it to get guidance - similar to how missals could kick into radio station signals to find a city back in the 60s. > On Feb 18, 2021, at 6:09 PM, Jaime

Re: [AFMUG] OT Helicopter on Mars

BFM On Thu, Feb 18, 2021, 3:38 PM Chuck McCown via AF wrote: > I wonder how it navigates. I presume a barometric altimeter will work > there. But how would they get bearing and distance from the ground > vehicle? You could use a Doppler antenna array to get a bearing I > suppose. And maybe

Re: [AFMUG] OT: getting old and angry

I have one Dos XX, two Pacificos and 4 Chihuahua Lagers... When I get home I will decide which to enjoy...peace On Thu, Feb 18, 2021, 3:56 PM James Howard wrote: > If you had said you needed a good beer…… > > > > [image: Image result for dos equis guy] > > > > *From:* AF *On Behalf Of * Jaime

Re: [AFMUG] OT: getting old and angry

If you had said you needed a good beer…… [Image result for dos equis guy] From: AF On Behalf Of Jaime Solorza Sent: Thursday, February 18, 2021 4:25 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT: getting old and angry Salud On Thu, Feb 18, 2021, 3:08 PM James Howard

Re: [AFMUG] OT Helicopter on Mars

https://spectrum.ieee.org/automaton/aerospace/robotic-exploration/nasa-designed-perseverance-helicopter-rover-fly-autonomously-mars From: Chuck McCown via AF Sent: Thursday, February 18, 2021 3:46 PM To: af@af.afmug.com Cc: Chuck McCown Subject: Re: [AFMUG] OT Helicopter on Mars >From an

Re: [AFMUG] OT Helicopter on Mars

>From an article in the IEEE magazine: We use a cellphone-grade IMU, a laser altimeter (from SparkFun), and a downward-pointing VGA camera for monocular feature tracking. A few dozen features are compared frame to frame to track relative position to figure out direction and speed, which is how

Re: [AFMUG] OT Helicopter on Mars

Oh, silly me, GPS of course... From: Chuck McCown Sent: Thursday, February 18, 2021 3:37 PM To: af@af.afmug.com Subject: OT Helicopter on Mars I wonder how it navigates. I presume a barometric altimeter will work there. But how would they get bearing and distance from the ground vehicle?

[AFMUG] OT Helicopter on Mars

I wonder how it navigates. I presume a barometric altimeter will work there. But how would they get bearing and distance from the ground vehicle? You could use a Doppler antenna array to get a bearing I suppose. And maybe some kind of DME for distance. Like to see a write up on that. --

Re: [AFMUG] OT: getting old and angry

Did two tower climbs to replace Cambium radios this morning...45ft each... My body is telling me I am 65 years old but my ego says 25... I want a beer On Thu, Feb 18, 2021, 2:00 PM Steve Jones wrote: > I think I may be aging out of my job, spend a lot of time too pissed at > stuff. > > I came

Re: [AFMUG] OT: getting old and angry

What is your goto mastic product? What do you order? From: AF On Behalf Of Steve Jones Sent: Thursday, February 18, 2021 3:00 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] OT: getting old and angry I think I may be aging out of my job, spend a lot of time too pissed at stuff. I

Re: [AFMUG] OT: getting old and angry

That's because you're not old enough yet.. Just you wait! From: AF On Behalf Of Mathew Howard Sent: Thursday, February 18, 2021 3:33 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT: getting old and angry I do hate silicone. I see no advantage over using mastic 99% of the

Re: [AFMUG] OT: getting old and angry

I do hate silicone. I see no advantage over using mastic 99% of the time. But for some reason that I can't fathom, installers occasionally decide that mastic doesn't work and they start using silicone again. Fortunately, I don't get quite that mad about it... On Thu, Feb 18, 2021 at 3:04 PM Adam

Re: [AFMUG] OT: getting old and angry

Man I feel ya... Except almost everything makes me angry, but my tempers flare when we are not appreciated at all. We have 2 ft of snow on the ground with below 0 temps which is unheard of here in 100yrs. So, I get the cold shoulder because I would not get into my 4wd tahoe with street tire

Re: [AFMUG] OT: getting old and angry

I don't hate silicone. I do prefer mastic under a lag bolt on the roof these days, but I do use silicone on a cable entry hole. On 2/18/2021 3:59 PM, Steve Jones wrote: I think I may be aging out of my job, spend a lot of time too pissed at stuff. I came across a box of some new stuff the

[AFMUG] OT: getting old and angry

I think I may be aging out of my job, spend a lot of time too pissed at stuff. I came across a box of some new stuff the boss ordered for the installer (i dont know if i ever mentioned i got a "promotion" a few years ago to a "supervisor" position but got cucked everytime i turned around, I

Re: [AFMUG] Starlink: first come, first served

I ordered ours for the cabin which is outside of our network area. Took my $600 on February 9th and still hasn’t shipped. This is for an area that is open right now. Most areas in MN say it will be six months or more before you can get service. Get Outlook for iOS

Re: [AFMUG] Starlink: first come, first served

Available today! >Depending on location, some orders may take 6 months or more to fulfill Very Apple-like. Stretching the meanings of words. Kind of like Unlimited Verizon/Tmo/ATT. Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu,

Re: [AFMUG] Starlink: first come, first served

Definately not everywhere. Starlink is targeting coverage in your area in mid to late 2021. You will receive a notification once your Starlink is ready to ship. On 2/18/21 9:25 AM, fiber...@mail.com wrote: The Starlink beta is now open to all on a first-come, first-served basis.

[AFMUG] Starlink: first come, first served

The Starlink beta is now open to all on a first-come, first-served basis. Availability limited based on user density. Residental use only, no moving, no sharing, no reselling, but no caps so far and IPv6. Same $99/month plus ~$600 up front. I'll be interesting to see how it performs as birds