Worked through window to porch area but when my wife came out to water her
plants and was right in front of receiver ...video broke up a bit ..more
testing tomorrow...going to read manual.
On Fri, Apr 10, 2020, 3:43 PM can...@believewireless.net <
p...@believewireless.net> wrote:
> My wireless
My wireless ones work pretty well but need to be power cycled pretty often.
I have some that work over Cat6
that work great.
On Thu, Apr 9, 2020 at 8:20 PM Jaime Solorza
wrote:
> Not sure i can do that but of course I have haven't read the instructions
> yet.. that's kind of low brow..oh well
>
Not sure i can do that but of course I have haven't read the instructions
yet.. that's kind of low brow..oh well
On Thu, Apr 9, 2020, 6:01 PM Bill Prince wrote:
> You should try a more narrow channel, and switch to 2.4 GHz. 5 GHz has no
> penetrating power; especially with a wide channel.
>
>
>
You should try a more narrow channel, and switch to 2.4 GHz. 5
GHz has no penetrating power; especially with a wide channel.
bp
On 4/9/2020 4:52 PM, Jaime Solorza
wrote:
Uses 40 MHz channel at 5805 MHz...I can track with
my
Receive signal in Batcave
On Thu, Apr 9, 2020, 5:08 PM Chuck McCown wrote:
> Very interested in the outcome.
>
> Sent from my iPhone
>
> > On Apr 9, 2020, at 4:52 PM, Jaime Solorza
> wrote:
> >
> >
> > Let's see how well it works
> >
> >
> > --
> > AF mailing list
> > AF@af.afmug.com
> >
Not great so far...I got a picture and it froze... transmitter is inside
house in my bedroommy Batcave is other end of house...mine is a real
solidly built home...no sheet rock in it...brick, cinder block and meshed
gypsum inside. Walls are thick very well insulated...even the cable
guys
Any idea what Frequency they run on? I had an old set of analog TV
repeaters, they were in 2.4 worked perfect until I turned the microwave
on.
On 4/9/2020 5:51 PM, Jaime Solorza wrote:
Let's see how well it works
--
AF mailing list
AF@af.afmug.com
Very interested in the outcome.
Sent from my iPhone
> On Apr 9, 2020, at 4:52 PM, Jaime Solorza wrote:
>
>
> Let's see how well it works
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
I gave the Bad Elf surveyor an honest try but it just can’t do the job. I need
to click, label and move. Then I want the whole file of points transferred in
one file. Import to google earth. And be accurate to 1 meter or less. Just
did not find middle ground so I finally just got the big
Because not knowing where you are to 5 digits, sucks!
On 04/19/2019 10:34 AM, Chuck McCown wrote:
Sent from my iPhone
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
10 matches
Mail list logo