Re: [AFMUG] Ordering M-TOW gear from dealers

I wish I had a good response. They all order good quantities of our stuff each month. From: Sam Lambie Sent: Tuesday, August 07, 2018 3:41 PM To: af@af.afmug.com Subject: [AFMUG] Ordering M-TOW gear from dealers I like this quote from your website Chuck " You will receive lower prices and

Re: [AFMUG] Ordering M-TOW gear from dealers

streakwave has been pretty reliable for us with chuck's stuff On Tue, Aug 7, 2018 at 3:41 PM, Sam Lambie wrote: > I like this quote from your website Chuck > "*You will receive lower prices and better service if you purchase from > one of our distributors.**If you would like to purchase from a >

[AFMUG] Ordering M-TOW gear from dealers

I like this quote from your website Chuck "*You will receive lower prices and better service if you purchase from one of our distributors.**If you would like to purchase from a distributor, please check our “How to Buy” page.*" I would buy from dealers, but they hardly ever have any of your shit i

Re: [AFMUG] Exposing utility crossings for drops

Sometimes it's easier to just hand bury a 10ft section above the other utility... On Tue, Aug 7, 2018, 2:44 PM Jason McKemie wrote: > Yeah, I was looking at those, I think water is about the only thing that > is going to work very well. Plus, I don't already have a compressor, so > I'd probably

Re: [AFMUG] Exposing utility crossings for drops

Yeah, I was looking at those, I think water is about the only thing that is going to work very well. Plus, I don't already have a compressor, so I'd probably just get a hydro excavator on a trailer instead of going that route. That just seems like a lot of equipment for a customer drop, so I was

Re: [AFMUG] Exposing utility crossings for drops

There are some digging setups that use compressed air (from a big trailer compressor) that can work well in sandy soils, but have heard you really need water to cut through more organic or clay soils. On Tue, Aug 7, 2018 at 1:52 PM, Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > The

Re: [AFMUG] Exposing utility crossings for drops

The soil can be extremely hard when it is dry - the power washer would probably be helpful for this. On Tue, Aug 7, 2018 at 12:33 PM, Chris Fabien wrote: > What the problem with a shovel? Hard clay? Rocks? That will determine what > is your best solution. > > On Tue, Aug 7, 2018 at 12:28 PM, Jas

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

I do it "like" that, but a little less labor intensively. I put the config in an editor and divide it into sections. Then I paste in each section and adjust as needed. usually, there are only a couple of syntax errors, and most of it goes in unscathed. bp

Re: [AFMUG] Exposing utility crossings for drops

What the problem with a shovel? Hard clay? Rocks? That will determine what is your best solution. On Tue, Aug 7, 2018 at 12:28 PM, Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > Besides a shovel, what are others using to do this? I was looking for > something like a mini vacuum excav

Re: [AFMUG] does the FBI investigate DOS attacks against an ISP?

I suspect that's about as likely as the FBI investigating the Nigerian prince that wants my bank account information... On Tue, Aug 7, 2018 at 12:13 PM Tim Reichhart < timreichh...@hometowncable.net> wrote: > Most likely not > > > > > -- > -Original Message- >

Re: [AFMUG] does the FBI investigate DOS attacks against an ISP?

Most likely not   -Original Message- From: "Kurt Fankhauser" To: af@af.afmug.com Date: 08/07/18 12:36 Subject: [AFMUG] does the FBI investigate DOS attacks against an ISP? If an ISP is attacked by DOS or DDOS attack is there somewhere to report that to and the FBI will investigate it

Re: [AFMUG] Exposing utility crossings for drops

I guess for more shallow crossings a shop vac and power washer might do the job. On Tuesday, August 7, 2018, Chuck McCown wrote: > I know a guy that connected a couple shop vacs to a 55 gallon barrel. That > and a power washer. Surprisingly it worked ok. > > Sent from my iPhone > > On Aug 7, 201

Re: [AFMUG] Exposing utility crossings for drops

I know a guy that connected a couple shop vacs to a 55 gallon barrel. That and a power washer. Surprisingly it worked ok. Sent from my iPhone > On Aug 7, 2018, at 10:28 AM, Jason McKemie > wrote: > > Besides a shovel, what are others using to do this? I was looking for > something like a mi

Re: [AFMUG] OT Trailer plug hell

Just want to make sure it is sending current over that pin. We always check the brakes by using them. Sent from my iPhone > On Aug 7, 2018, at 9:21 AM, Nate Burke wrote: > > That won't actually test a Brake controller though, will it? Especially one > that needs a brake load before it turns

[AFMUG] does the FBI investigate DOS attacks against an ISP?

If an ISP is attacked by DOS or DDOS attack is there somewhere to report that to and the FBI will investigate it? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] Exposing utility crossings for drops

Besides a shovel, what are others using to do this? I was looking for something like a mini vacuum excavator, but everything I've found is way too heavy duty for what I need. This did show up: www.holevac.com - I'm guessing it does not work nearly as well as they're showing though. Something alo

Re: [AFMUG] OT Trailer plug hell

That won't actually test a Brake controller though, will it? Especially one that needs a brake load before it turns on. Then you need something like this for testing. https://www.amazon.com/Electric-Dynamic-Simulation-Circuit-Testing/dp/B073FJ5NVL Of course that will test the vehicle, if you

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

old firmware is 6.34.4testing On Tue, Aug 7, 2018 at 10:44 AM Dave wrote: > +1 this works too :) > > > On 08/07/2018 09:38 AM, Seth Mattinen wrote: > > On 8/7/18 7:18 AM, Timothy Steele wrote: > > We Have a Mikrotik CloudCore Router running very old firmware (From 2015) > I have been tasked with

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

Problem with that is, a lot of new Mikrotiks have minimum versions (they can't be downgraded below something like 6.38.x). Another solution would be to make a backup, upgrade the firmware to a current version, and then make a new backup. In the event that you end up with only a backup that's from

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

+1 this works too :) On 08/07/2018 09:38 AM, Seth Mattinen wrote: On 8/7/18 7:18 AM, Timothy Steele wrote: We Have a Mikrotik CloudCore Router running very old firmware (From 2015)  I have been tasked with getting the config with the latest stable firmware I Have a Mikrotik on my test benc

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

This is not such a bad thing to do by going thru each line to verify the completeness and syntax. Sometimes there things exported that do not need exporting. On 08/07/2018 09:27 AM, Avatar wrote: Morning, What I usually do in these situations, though it may not be the most efficient, is t

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

On 8/7/18 7:18 AM, Timothy Steele wrote: We Have a Mikrotik CloudCore Router running very old firmware (From 2015)  I have been tasked with getting the config with the latest stable firmware I Have a Mikrotik on my test bench same model as the one in use when I export the config I get lots o

Re: [AFMUG] OT Trailer plug hell

Nice tester. Going to get one. Will save me the effort of building one. Thanks. From: Mark Radabaugh Sent: Tuesday, August 07, 2018 8:15 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT Trailer plug hell One of these: https://www.etrailer.com/Wiring/Pollak/PK12741.html and

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

Morning, What I usually do in these situations, though it may not be the most efficient, is to open the terminal in the tik with the config, export compact file=whatever you want to call it Then I take that file and put it into notepad ++ and then paste each line and see what errors occur. Usua

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

what is the actual version of the old firmware? On Tue, Aug 7, 2018 at 9:18 AM, Timothy Steele wrote: > We Have a Mikrotik CloudCore Router running very old firmware (From 2015) > I have been tasked with getting the config with the latest stable firmware > > > I Have a Mikrotik on my test bench

[AFMUG] Moving Mikrotik Config from old firmware to new firmware

We Have a Mikrotik CloudCore Router running very old firmware (From 2015) I have been tasked with getting the config with the latest stable firmware I Have a Mikrotik on my test bench same model as the one in use when I export the config I get lots of errors when I try to import the config with

Re: [AFMUG] OT Trailer plug hell

One of these: https://www.etrailer.com/Wiring/Pollak/PK12741.html and the appropriate adapters. Or just buy one of each: https://www.etrailer.com/Wiring/Brophy/F4CT.html https://www.etrai

Re: [AFMUG] OT Trailer plug hell

Yep, most common for RVs. Have to have working brakes on everything. From: Nate Burke Sent: Tuesday, August 07, 2018 7:36 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT Trailer plug hell I might be wrong, but I think he means 7 flat pins in a round configuration, as opposed t

Re: [AFMUG] OT Trailer plug hell

I might be wrong, but I think he means 7 flat pins in a round configuration, as opposed to 7 round pins in a round configuration. What does UHaul Use for pin configuration? I figure that those trailers make it from coast to coast on a weekly basis, so whatever they do is probably the most sta

Re: [AFMUG] OT Trailer plug hell

I don't think I've ever seen 7 flat. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Chuck McCown" To: "AnimalFarm Microwave Users Group" Sent: Monday, August 6, 2018 9:39:43 AM Subject: Re: [AF