Re: [AFMUG] RF Calibration Failure ADI Catalina R0 chip not supported!

This was a known issue back in the day. Don't remember if it was a hardware thing or a software thing. I'm assuming you've got the latest supported firmware in it? On Sat, Mar 17, 2018 at 8:21 AM, Andreas Wiatowski wrote: > Hi All, > > > > I’ve never seen this

Re: [AFMUG] Mimosa confirms the USA is weird

It is a little odd, but it happens sometimes... I wouldn't be surprised if it's actually 8mm, and they just say 5/16" because that's more common for nut drivers (in the US, anyway). On Sat, Mar 17, 2018, 5:33 PM Eric Kuhnke wrote: > So... I'm Canadian and mix metric and

[AFMUG] Rohn 25 on metal building

I'm building a 40x40 or possibly 50x60 steel building. I would like to install a guyed 25g on the peak (about 20ft peak from ground level with 16ft walls) If I guy off 4 times how high can I go? Any way to do 100ft or ten sections ? I'm assuming my guy span isn't far out enough. I know

Re: [AFMUG] handy dog proofing for service truck

Where are dogs getting to the cable? On Fri, Mar 16, 2018 at 5:57 PM, Steve Jones wrote: > Being back in the grind now, Im finding installers just keep replacing cable > on animal chews. Yesterday I had to take everything off a yagi and tapcon > the pipe to a brick

Re: [AFMUG] Down tilt for 450i

I agree we should be looking at dual slant. I think I'll revisit our design - Original Message - From: Colin Stanners To: af@afmug.com Cc: memb...@wispa.org Sent: Saturday, March 17, 2018 11:32 AM Subject: Re: [AFMUG] Down tilt for 450i Are you setting up all of your

Re: [AFMUG] Serverplus

https://www.youtube.com/watch?v=GyJXDdlD4jQ "IN-DE GO" :) On Thu, Mar 15, 2018 at 7:45 AM, Matt Hoppes < mattli...@rivervalleyinternet.net> wrote: > It’s In Di Go. Like the color. Not In Dee Go. Like a butchered version of > the six fingered man. > > On Mar 14, 2018, at 04:27, Josh Reynolds

Re: [AFMUG] Test test

test On Fri, Mar 16, 2018 at 3:35 PM, Matt Hoppes wrote: > Is this thing on? Messages seem to be being delayed by days.

Re: [AFMUG] Down tilt for 450i

What dual polarity 900mhz antennas are you finding that aren't slant? Also, it works fine to mix slant and H/V between the APs and SMS with PMP450. On Sat, Mar 17, 2018, 11:32 AM Colin Stanners wrote: > Are you setting up all of your 900mhz 450I to be dual-pol instead of >

Re: [AFMUG] RF Calibration Failure ADI Catalina R0 chip not supported!

Doesn't look like it :( https://community.cambiumnetworks.com/t5/PMP-Known-Issues/Field-Service-Bulletin-ADI-Catalina-R1-Chip-not-supported/td-p/43211 On Sat, Mar 17, 2018 at 7:21 AM, Andreas Wiatowski wrote: > Hi All, > > > > I’ve never seen this before…but it looks

Re: [AFMUG] Making epmp connect faster/ site survey

Cutting unnecessary stuff out of the scan list does help, but beyond that I haven't been able to find anything that makes much difference. It seems like it takes longer when you have a weak signal... I kind of wonder if that's by design to keep them from connecting to the wrong AP to quickly. On

Re: [AFMUG] IP / ethernet / 115Vac PDUs?

Title: Re: [AFMUG] IP / ethernet / 115Vac PDUs? justsumname, I use these where I need a simple just one device on a reboot. http://dataprobe.com/iboot/#models I also use the packectflux stuff when deal with DC only.  Can be use for AC if you don't mind adding an extra relay that can handle AC.

Re: [AFMUG] Fwd: 8 hours no lunch

Test. Test Jaime Solorza On Sat, Mar 17, 2018, 5:47 AM Jaime Solorza wrote: > Yo o mi trabajo? No soy chico facile > > Jaime Solorza > > On Thu, Mar 15, 2018, 6:46 PM Faisal Imtiaz > wrote: > >> que lindo ! >> >> Faisal Imtiaz >> Snappy

[AFMUG] test (list lag time)

Posted Saturday March 17 9:21 MDT

Re: [AFMUG] Circuit breaker clearance

Thanks. Better than the 72” I was thinking. No idea where my NEC is... Sent from my iPhone > On Mar 16, 2018, at 10:14 PM, Seth Mattinen wrote: > >> On 3/15/18 12:03 PM, Chuck McCown wrote: >> I am installing a backup generator. I know you have to have 3 feet of >>

Re: [AFMUG] IP / ethernet / 115Vac PDUs?

Synaccess netbooter On Sat, Mar 17, 2018, 12:56 AM justsumname . wrote: > This sorta thing: https://dlidirect.com/products/new-pro-switch > > What you guys using these days?I don't need wifi or more than 2 > outlets, just a thingy to 'remotely' power-cycle a stubborn

Re: [AFMUG] Making epmp connect faster/ site survey

Reducing the channels and bandwidth has sped it up for us immensely. Shouldn't take that long to register, enough that you could definitely find it in a foggy day. On Sat, Mar 17, 2018 at 4:35 AM, Steve Jones wrote: > Im going to be asking alot of installer questions