Re: [AFMUG] Netonix rebooting over and over

1.5amp on VH ports I believe. Maybe your power supply or power cord isn't supplying enough amps to the switch. Jon Langeler Michwave Technologies, Inc. > On Jun 29, 2017, at 11:42 PM, George Skorup wrote: > > The Baicells 1-watt eNB @ 3.5/3.6GHz is about 65 watts.

Re: [AFMUG] Netonix rebooting over and over

The Baicells 1-watt eNB @ 3.5/3.6GHz is about 65 watts. I haven't actually measured this, but I can next week when I'm at one of those sites. So.. 4 of those would be 260 watts. And I thought the Netonix 48VH POE mode is limited to 0.75A per port...? Those eNBs are going to pull well over 1A

[AFMUG] Netonix rebooting over and over

We install the DC powered Netonix 12 port switch today on the water tower power off of 48 V power supply. The only device is powered off of the switch are Baicells sectors all four of them are power off of 48 V ports 123 and 4. When we first installed them all of them powered up individually

[AFMUG] New AF5X using less power than older board revisions?

Provisioning a new AF5X link here on their AC PoE injectors before they go out to the field. Something interesting I've noticed, and maybe I'm not remembering right, but it seems that the newer AF5X use less power than the older ones. This unit with its ubnt default PoE injector plugged into a

Re: [AFMUG] ePMP Frame Utilization Working?

up is entirely gone dl has been working since 3.3 for me Josh Luthman Office: 937-552-2340 <(937)%20552-2340> Direct: 937-552-2343 <(937)%20552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 29, 2017 at 5:53 PM, Josh Baird wrote: > "dl" works fine in 3.3, but

Re: [AFMUG] ePMP Frame Utilization Working?

"dl" works fine in 3.3, but "ul" is broken (reports 99.9%). I thought it was being removed in future versions. On Thu, Jun 29, 2017 at 5:39 PM, Christopher Gray < cg...@graytechsoftware.com> wrote: > The MIB notes for ePMP firmware 3.4 show: > > dlWLanTotalAvailableFrameTimePercentage >

Re: [AFMUG] Tower base question

It's in Hobbs, NM..we have requested numbers...we are doing the tower monkey stuff installing antennas, cabling, radios, lightning protection and alignment. The guys there thought electrical contractor who is in charge of erecting towers price is high...even with crane it seems high. Jaime

Re: [AFMUG] Tower base question

Seems high to me. What is the cubic volume and how much do you pay for concrete there? From: Jaime Solorza Sent: Thursday, June 29, 2017 3:22 PM To: Animal Farm Subject: [AFMUG] Tower base question What are you guys paying for concrete base for a Rohn RS 60 ft. Self supported tower?

[AFMUG] ePMP Frame Utilization Working?

The MIB notes for ePMP firmware 3.4 show: dlWLanTotalAvailableFrameTimePercentage ulWLanTotalAvailableFrameTimePercentage Has anyone tested these / is frame utilization working now? Thank you - Chris

Re: [AFMUG] Tower security camera recommendations

Would you put that somewhere where it would be fully exposed? Whatever I install will likely be in direct rain. Eric Kuhnke wrote: Reolink RLC-420

Re: [AFMUG] Muni F I B E R

True, but most people don't have to deal with BLM. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Chuck McCown" To: af@afmug.com Sent: Thursday, June 29, 2017 12:40:21 PM

Re: [AFMUG] Muni F I B E R

City of Hamilton On Thu, Jun 29, 2017 at 11:22 AM Kurt Fankhauser wrote: > lewis, what city is that project in ohio in? > > On Mon, Jun 26, 2017 at 11:18 AM, Lewis Bergman > wrote: > >> I did skim it. I guess you could read it either way but

[AFMUG] Tower base question

What are you guys paying for concrete base for a Rohn RS 60 ft. Self supported tower? 16,000.00 is what they quoted someone...seems high Jaime Solorza

Re: [AFMUG] Hybrid Control tower top

Yes From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Baird Sent: Thursday, May 25, 2017 3:57 PM To: af@afmug.com Subject: Re: [AFMUG] Hybrid Control tower top And you are using a SyncBox connected to the timing port of the 320 for sync? On Thu, May 25, 2017 at 2:18 PM, Paul McCall

Re: [AFMUG] Tower security camera recommendations

I think you want to separate the alerting and camera functionality. Have the camera output a H.264 RTSP stream to some sort of video monitoring system (Zoneminder, etc) which can do alerts. Don't rely on built in camera SMTP functionality to alert on anything. For a camera, check out the Reolink

Re: [AFMUG] 15.1 Radar

12 On Thu, Jun 29, 2017 at 3:22 PM, Brian Sullivan wrote: > In Config > Radio > Power Control, what is the External Gain set to? > > On 6/29/2017 11:25 AM, Kurt Fankhauser wrote: > > I too have noticed some increased DFS hits, usually happens in the morning > hours >

Re: [AFMUG] 15.1 Radar

In Config > Radio > Power Control, what is the External Gain set to? On 6/29/2017 11:25 AM, Kurt Fankhauser wrote: I too have noticed some increased DFS hits, usually happens in the morning hours On Tue, Jun 27, 2017 at 3:26 PM, Eric Muehleisen

Re: [AFMUG] Force110 vs Force200

we keep the lower end of the 5.4 reserved for local PTP, we crank the power down and point to the ground if need be On Thu, Jun 29, 2017 at 12:16 PM, Josh Luthman wrote: > 0% chance of interfering with the radio a foot away. In the event you > need to change bands

Re: [AFMUG] Muni F I B E R

Not always. NEPA is NEPA. If a city wants to pass over BLM turf, same process applies. -Original Message- From: Seth Mattinen Sent: Thursday, June 29, 2017 10:38 AM To: af@afmug.com Subject: Re: [AFMUG] Muni F I B E R On 6/29/17 09:34, Layne Sisk wrote: So what we are saying is the

Re: [AFMUG] Force110 vs Force200

0% chance of interfering with the radio a foot away. In the event you need to change bands or the installer sets the same band. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 29, 2017 at 12:31 PM, Mathew Howard

Re: [AFMUG] Muni F I B E R

On 6/29/17 09:34, Layne Sisk wrote: So what we are saying is the private business can do things more cost effectively than government? Government can get through permitting and planning roadblocks easier though, unless you can name drop like Google Fiber did. ~Seth

Re: [AFMUG] Muni F I B E R

So what we are saying is the private business can do things more cost effectively than government? Wow, so shocking  Layne Sisk ServerPlus 801.426.8283, ext 102 [New logo xl] [http://i.imgur.com/VOz763A.png]

Re: [AFMUG] Force110 vs Force200

Yeah, I'm not sure why you would ever use 2.4ghz, if you don't have to. Much better to just use a different part of the 5ghz band, in my opinion... this sort of thing is usually a perfect fit for the DFS band. On Thu, Jun 29, 2017 at 9:41 AM, Josh Luthman wrote: >

Re: [AFMUG] Tower security camera recommendations

Any Dahua Starlight camera will have extreamly good night performance over anything else. I have been putting these up, they are PTZ but cost is same for a fixed non PTZ starlight so mise as well get the PTZ

Re: [AFMUG] 15.1 Radar

I too have noticed some increased DFS hits, usually happens in the morning hours On Tue, Jun 27, 2017 at 3:26 PM, Eric Muehleisen wrote: > Yes. Two events yesterday on same AP. I have no previous history since > this AP is a new install. It's mounted to a concrete grain

Re: [AFMUG] Muni F I B E R

lewis, what city is that project in ohio in? On Mon, Jun 26, 2017 at 11:18 AM, Lewis Bergman wrote: > I did skim it. I guess you could read it either way but you are likely > right. Still seems a bit high. I am only familiar with one other Muni dark > fiber project in

Re: [AFMUG] board repairs

Most "repair" shops these days seem to be buying equipment used wholesale and just replacing entire boards with other used boards. On Thu, Jun 29, 2017 at 9:40 AM Josh Luthman wrote: > R201p is Cambium, but I do agree with you. > > > Josh Luthman > Office:

Re: [AFMUG] Force110 vs Force200

20 MHz * 4 bits perfect would be 80 megsbest case scenario. If you need to carry 100 megs, do a Force 180 in DFS with 40 MHz channels. You can have a shop guy program a bunch of pairs/do a backup ready to go for the installers. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100

Re: [AFMUG] board repairs

R201p is Cambium, but I do agree with you. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 29, 2017 at 10:25 AM, Colin Stanners wrote: > With the cost of a shop, trained technicians, their time, parts and >

Re: [AFMUG] board repairs

With the cost of a shop, trained technicians, their time, parts and shipping, I don't think it'd be possible to do "average difficulty" electronic repairs (e.g. identifying and replacing damaged surface-mount components) in the US for less than $50-80USD per item even at scale. So for cheaper MT

Re: [AFMUG] board repairs

thats just it.. I know it maybe cheaper to buy replacements but if there was someone out there that has a shop setup and setup to be efficient at breathing life back into these things he could make some descent moneys I am really thinking hard about what my next career will be and this could

Re: [AFMUG] Force110 vs Force200

Right, our thought process was run the APs in the 5GHz band and use the Nanostation 2s. That has seemed to work well, but just wondering if anyone else had another suggestion. Sounds like we will stay with this. We typically run the fattest channel we can on these relay radios. We will

[AFMUG] Siklu PTMP Experiences?

Anyone tried it? Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]