Re: [AFMUG] what pole is this?

I need to find engineering so I can determine what loads they can support. This one was a spare, but there is a bunch of others still up. If I can’t determine the model/manufacturer, is there a way to figure out what they’ll support? I think I remember hearing these are a super common model.

Re: [AFMUG] battery

Anything that has a label on it with cranking amps is not designed to be used in cyclic applications... Very different internal plate design versus an Outback 106RE or similar. Lead acid batteries designed for cyclic use (PV/wind) or telecom/float use will have a datasheet with 1 hour and 20

Re: [AFMUG] battery

I don't think this is a true deep cycle battery but rather a hybrid marine one. It's good for backup but I wouldn't use it for a daily cycler. The 1A discharge AH rating is another clue... I have used these for backup systems though. I'd guess they are good for 80-100 cycles roughly (a lot of

Re: [AFMUG] battery

I eagerly await your review when you have some in service. On 12/29/2017 11:27 AM, ch...@wbmfg.com wrote: WalMart PN: 29DC 1464 watt hours $86.83 5.9 cents per watt hour Doesn't come much cheaper than that.

Re: [AFMUG] battery

Sad that an apple product becomes the icon of bad products... But we have literally 100's of these batteries in service and, yes there is a failure rate, but it's the same as all the other brands of batteries ( all wet ) that we use.. Some costing 2x the price. On 12/29/2017 11:30 AM,

Re: [AFMUG] battery

I was just at one of the Autoparts stores, they had a series of battery that was 1/2 the cost of the next closest, it had a 2 month warranty. I figured that's about as long as it would last. They probably test the old cores, one's that would hold any charge they clean up and slap a new label

Re: [AFMUG] battery

Designed to fail 1 month after warranty expires.� Planned obsolescence, like an IPhone. On 12/29/2017 1:27 PM, ch...@wbmfg.com wrote: WalMart PN: 29DC 1464 watt hours $86.83 5.9 cents per watt hour Doesn't come much cheaper than that.

Re: [AFMUG] what pole is this?

I make stuff like that every day. If you want a custom build. -Original Message- From: Dev Sent: Friday, December 29, 2017 10:23 AM To: af@afmug.com Subject: [AFMUG] what pole is this? Trying to find the pole manufacturer and if possible the model number/name of this pole, does

Re: [AFMUG] what pole is this?

I can't answer about that specific pole, but Valmont makes a bunch of light poles. If you wanted to replace it with fiberglass I can point you towards a company for that. -- Original Message -- From: "Dev" To: af@afmug.com Sent: 12/29/2017 12:23:39 PM

[AFMUG] what pole is this?

Trying to find the pole manufacturer and if possible the model number/name of this pole, does anyone know? http://cheatsheet.logicalwebhost.com/steelpole1.jpg I thought maybe there’d be information inside the base cover, but don’t see any: http://cheatsheet.logicalwebhost.com/steelpole2.jpg

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Yeah but it requires over 50W iirc vs a UBNT AP 8-10w From: Af > on behalf of Rory Conaway > Reply-To: "af@afmug.com" > Date: Friday,

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Thanks Neil! Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV Silo Wireless is a Proud Member of: CanWISP http://www.canwisp.ca WISPA http://wispa.org Brantford Brant Chamber of

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Andreas We used these SYNCBOX JUNIOR AUX PORT VERSION Works like a charm Neil On Fri, Dec 29, 2017 at 11:47 AM, wrote: > Do you already have the CMM5? If not I would use Packetflux. > > *From:* Andreas Wiatowski > *Sent:* Friday, December 29, 2017 9:43 AM > *To:*

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

I don’t have a CMM5. I have been using CMM4 and Packetflux over the years. I didn’t know PF had a Medusa capable unit on the market…I will take a look. Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless |

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Do you already have the CMM5? If not I would use Packetflux. From: Andreas Wiatowski Sent: Friday, December 29, 2017 9:43 AM To: af@afmug.com Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) We need power and timing, but no data… hence the CMM5. Cheers, Andreas

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

We need power and timing, but no data… hence the CMM5. Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV Silo Wireless is a Proud Member of: CanWISP http://www.canwisp.ca WISPA

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Isn't the 450m 48v? Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino A. Villarini Sent: Friday, December 29, 2017 9:19 AM To: af@afmug.com Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) Power consumption from the 450M is very different form a UBNT Unifi AP...

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

Power consumption from the 450M is very different form a UBNT Unifi AP… just saying! From: Af > on behalf of Rory Conaway > Reply-To: "af@afmug.com"

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

I would work out ohms law on it to make sure. Do you need to run data over the CAT 5? If not, you really don’t need the CMM5, just connect all the wires of similar polarity and connect direct to the power supply. From: Andreas Wiatowski Sent: Friday, December 29, 2017 7:14 AM To: af@afmug.com

Re: [AFMUG] 450M maximum length of Cat5e (Just for power)

If you use 23G Cat-6, you should be fine. We just connected a Ubiquiti Unifi radio at 490’ and it’s running fine. We used Primus direct burial cable for this run. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Andreas Wiatowski Sent: Friday, December 29, 2017 7:15 AM To:

[AFMUG] 450M maximum length of Cat5e (Just for power)

Good Morning, We have a couple of large towers where we will be installing 450M with fibre. To power we, would like to use the CMM5 , but we are unsure if we can power the M sufficiently over such a long CAT 5 run. Does anyone have the answer to this? We could see cat5 runs (Shielded and

Re: [AFMUG] Office Wire labeling

Fine tip marker is really the best On Thu, Dec 28, 2017, 8:53 PM George Skorup wrote: > For office/structure wiring, simple electrical wire number markers work > fine. The kind you can get in booklets or on a dispenser like this: >