an run hardware scheduling on any SM, but you need a P9 or higher to
> run it on the AP.
>
>
> -- Original Message --
> From: "Gilbert Gutierrez" <mailing-li...@phxinternet.com>
> To: af@afmug.com
> Sent: 1/10/2018 12:26:57 PM
> Subject: Re: [AFMUG] OL
I do not have access anymore to a version that old. Is there a way for me
to get a copy of it?
Gilbert
On Wed, Jan 10, 2018 at 10:31 AM, Brian Sullivan <installe...@foxvalley.net>
wrote:
> We use CNUT v3 to interface 100 series.
>
>
> On 1/10/2018 11:12 AM, Gilbert Gutierre
day, January 10, 2018 12:16 PM
> To: af@afmug.com; Gilbert Gutierrez <mailing-li...@phxinternet.com>
> Subject: Re: [AFMUG] OLD FSK Equipment
>
> How old?
>
> If it's a P8, you're screwed. P9 and up can do HW scheduling.
>
>
> bp
> <part15sbs{at}gmail{dot}c
I am trying to convert an old FSK 100 from software scheduled to hardware
scheduled but am hitting a wall.
When I run the Advantage Platform Scheduler, here are my symptoms...
1. The AP is listed as Unable to Communicate/Extract info from Element in
the tool
2. When I select the element, I can
I have a radio set that I inherited through a company purchase that has
a software issue (Rel. 800-06-01) that does not allow it to ping from
outside networks. I was wondering if anyone out there has Rel. 800-06-02
software (release notes show that it resolves that ICMP issue) that they
would
Erich,
With the little bit of info you are providing, it is hard to help. You
spoke of both inbound routes and outbound routes. Which direction are
you having issues with? Is the client using a Public or Private AS
number? Do your outbound filters only allow your network to be
advertised, or
Sorry, I read your question wrong. You can disregard my last message.
What is the network type on the interfaces? I use point-to-point for
/30's. Both sides need to be set to that way for that type to work
properly. You may wish to try changing the type. The backup and
designated router I
Are you redistributing Connected? If the /30 is not on the networks tab,
then you will need to redistribute connected routes. If you add static
routes pointing to places you will want to redistribute static routes as
well.
Gilbert
On 5/20/2015 1:03 PM, That One Guy /sarcasm wrote:
So I have
http://www.kpperformance.ca/5ghz-17-tall-18-2-dbi-40-degree-sector
Gilbert
On 4/14/2015 8:57 AM, Bill Prince wrote:
40° at 6db roll-off? What's the 3db roll-off, and what is the vertical
beam width?
bp
part15sbs{at}gmail{dot}com
On 4/14/2015 8:56 AM, Gilbert Gutierrez wrote:
KP Performance
KP Performance makes a 40Degree that I am using right now at one of my
sites. It is performing well.
Gilbert
On 4/13/2015 10:45 PM, Sean Heskett wrote:
does anyone have a good recommendation for a 30* (at the 3db roll off
point) antenna for the canopy 5ghz PMP450 AP?
Thanks!
-Sean
I usually use LMR400 for the short run between my radio and sector. What
do others use for cabling between the radio and the sector? Maybe
LMR195. The jumpers I use are 1M in length and I was thinking something
a bit lighter and flexible would work better.
Gilbert
I am not using OEM sectors. I will try LMR-240.
Gilbert
On 4/13/2015 3:42 PM, George Skorup (Cyber Broadcasting) wrote:
Mounted on Cambium's (Laird OEM) antennas? They sell LMR-240 jumpers
that are the correct length (16).
On 4/13/2015 5:14 PM, Gilbert Gutierrez wrote:
I usually use LMR400
I would also suggest getting a WISP consulting company involved if you
have questions on what products to use. BGP can be an issue with full
routes on a CCR due to the way RouterOS is designed with that processor.
x86 processor handles BGP great. With that being said, I have over a
Gigabit of
I was going to post to the list to ask a question, but when you say no
ap list Are you saying no MAC addresses in the ARP table, because
that is what I am seeing. The only ARP entry I see is the radio gateway.
My customer devices are not showing in the arp table of the subscriber
epmp
14 matches
Mail list logo
