like this:
http://www.showmecables.com/product/ICC-4-Pair-110-Style-Field-Temination-Plugs.aspx
*From:* Chuck McCown ch...@wbmfg.com
*Sent:* Friday, February 20, 2015 5:06 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Cat5 Splicing
If you have to, you can strip it and kinda wire wrap around
If you have to, you can strip it and kinda wire wrap around the 110 slot and
then attempt to kinda punch it down.
From: Eric Kuhnke
Sent: Thursday, February 19, 2015 2:38 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
Stranded cable just doesn't punch down on standard 110-type teeth
There are 110 patch cables. If you need to field terminate your own, use
something like this:
http://www.showmecables.com/product/ICC-4-Pair-110-Style-Field-Temination-Plugs.aspx
From: Chuck McCown
Sent: Friday, February 20, 2015 5:06 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
through their walls,
but you should very rarely encounter stranded cable in permanent wiring.
*From:* Josh Reynolds mailto:j...@spitwspots.com
*Sent:* Thursday, February 19, 2015 1:24 PM
*To:* af@afmug.com mailto:af@afmug.com
*Subject:* Re: [AFMUG] Cat5 Splicing
Depends on what market you
:* Re: [AFMUG] Cat5 Splicing
He might have been talking about the ScotchLok U1R They take a pair
and splice to another pair. You can keep them twisted right up until
they go into the connector
On 2/19/2015 11:23 AM, Jerry Richardson wrote:
We’ve been using these – the are bit less
rarely encounter
stranded cable in permanent wiring.
From: Josh Reynolds
Sent: Thursday, February 19, 2015 1:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
Depends on what market you are in. If you're in general IT doing things
indoors, it's normally stranded. Most outdoor stuff I've
that work for Cat6 end to end splicing? I forget if Cat5e and
Cat6 cable are usually solid core.
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Burke
*Sent:* Thursday, February 19, 2015 10:53 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Cat5 Splicing
He might have been talking about
: [AFMUG] Cat5 Splicing
Depends on what market you are in. If you're in general IT doing
things indoors, it's normally stranded. Most outdoor stuff I've seen
is solid.
(side note: f@#k stranded CatX)
--
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 02/19/2015 09:07 AM, Sterling Jacobson wrote
Would that work for Cat6 end to end splicing? I forget if Cat5e and Cat6 cable
are usually solid core.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke
Sent: Thursday, February 19, 2015 10:53 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
He might have been talking about
[mailto:af-boun...@afmug.com] *On Behalf Of
*Nate Burke
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were
using a Cat5 splice
to this:
http://www.alliedelec.com/3m-u1r/70112963/
*From:* Nate Burke mailto:n...@blastcomm.com
*Sent:* Thursday, February 19, 2015 10:51 AM
*To:* af@afmug.com mailto:af@afmug.com
*Subject:* Re: [AFMUG] Cat5 Splicing
I wouldn't use the pictured one either, but supposedly there is a
product like
...@blastcomm.com
*Sent:* Thursday, February 19, 2015 10:51 AM
*To:* af@afmug.com mailto:af@afmug.com
*Subject:* Re: [AFMUG] Cat5 Splicing
I wouldn't use the pictured one either, but supposedly there is a
product like this, but specific for Cat5/6 where the pair go into the
connector. It would replace doing
I like the look of Jerry’s solution best.. $16 and I wouldn’t feel I need to
replace it..
Peter Kranz
Founder/CEO - Unwired Ltd
http://www.unwiredltd.com/ www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-
mailto:pkr...@unwiredltd.com pkr...@unwiredltd.com
I think I agree.
We've used the Bulgin jobs for a long time, and they work very well.
However, with the Bulgin you have to terminate the ends after you've
threaded the glands/nuts on.
This one looks like you can terminate the ends before assembly.
bp
part15sbs{at}gmail{dot}com
On
The rubber gromits on mine definitely look a lot better. That looks fine
if it was 1 of them vertical, but I'd be afraid of dust/dirt getting into
it sideways.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Feb 19, 2015 at 1:30 PM, Peter
From: Josh Reynolds
Sent: Thursday, February 19, 2015 1:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
Depen
boss is ordering a couple of those
On Thu, Feb 19, 2015 at 12:30 PM, Peter Kranz pkr...@unwiredltd.com wrote:
I like the look of Jerry’s solution best.. $16 and I wouldn’t feel I need
to replace it..
[image: Waterproof Shielded RJ45 Female to Female Field Installable
Coupler]
*Peter
I was the one that you were talking to at AF. I've been using these for
years. I still try to protect them from water by wrapping in mastic,
electrical tape, and putting them in a box.
On Thu, Feb 19, 2015 at 8:51 PM, Jeremy jeremysmi...@gmail.com wrote:
None of those. You want Thomas and
None of those. You want Thomas and Betts 709 SC. End-to-end splice.
On Thu, Feb 19, 2015 at 2:49 PM, That One Guy thatoneguyst...@gmail.com
wrote:
boss is ordering a couple of those
On Thu, Feb 19, 2015 at 12:30 PM, Peter Kranz pkr...@unwiredltd.com
wrote:
I like the look of Jerry’s
Out at AF I was talking to some who said that they were using a Cat5
splice product. They described it as being similar to a butt connector
Image result for cat5 splice keep twist
but was specifically made to accept the Cat5 twist, so that the twist
went all the way into the unit to splice
We use them. Gel filled so they are water resistant.
Adam
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke
Sent: Thursday, February 19, 2015 8:38 AM
To: Animal Farm
Subject: [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were using a Cat5 splice
] Cat5 Splicing
Out at AF I was talking to some who said that they were using a Cat5
splice product. They described it as being similar to a butt connector
Image result for cat5 splice keep twist
but was specifically made to accept the Cat5 twist, so that the twist
went all the way into the unit
, February 19, 2015 9:03 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
Look up 3M ScotchLok. Our guys use them all the time. I once used them to
splice together a 300ft. CAT5 cable running up the tower that was cut at the
base by a tower climber. Worked great for temporary use
Burke
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were
using a Cat5 splice product. They described it as being
similar to a butt connector
Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were
using a Cat5 splice product. They described it as being
similar to a butt connector
Image result for cat5 splice keep twist
but was specifically made
them. Gel filled so they are water resistant.
Adam
*From:* Af [mailto:af-boun...@afmug.com af-boun...@afmug.com] *On
Behalf Of *Nate Burke
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said
AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were using
a Cat5 splice product. They described it as being similar to
a butt connector
Image result for cat5 splice keep twist
.
Adam
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate
Burke
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were
using a Cat5 splice
them. Gel filled so they are water resistant.
Adam
*From:* Af [mailto:af-boun...@afmug.com af-boun...@afmug.com] *On
Behalf Of *Nate Burke
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said
*Sent:* Thursday, February 19, 2015 8:38 AM
*To:* Animal Farm
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who said that they were
using a Cat5 splice product. They described it as being
similar to a butt connector
Image result
*Subject:* [AFMUG] Cat5 Splicing
Out at AF I was talking to some who
said that they were
using a Cat5 splice product. They
described it as being
Sounds like they are referring to this:
http://www.alliedelec.com/3m-u1r/70112963/
From: Nate Burke
Sent: Thursday, February 19, 2015 10:51 AM
To: af@afmug.com
Subject: Re: [AFMUG] Cat5 Splicing
I wouldn't use the pictured one either, but supposedly there is a product like
this, but specific
32 matches
Mail list logo
