use that power supply with either the CMM5 or one of the packetflux devices.
On Mon, Jan 15, 2018 at 11:32 AM, Sam Lambie wrote:
> Sean,
>
> That is for the CMM. I am looking to use 1 power supply for 4 radios. I
> actually have the factory power supplies for individual
the CMM PSU will do it no problem, and that cambium one at that wattage
from what Ive priced is pretty good cost. The 600 dollar range is what ive
seen
On Mon, Jan 15, 2018 at 12:32 PM, Sam Lambie wrote:
> Sean,
>
> That is for the CMM. I am looking to use 1 power supply
Sean,
That is for the CMM. I am looking to use 1 power supply for 4 radios. I
actually have the factory power supplies for individual radios. But the
cabinet that I am using is lacking in space. Hence trying to consolidate to
one psu.
On Mon, Jan 15, 2018 at 11:17 AM, Sean Heskett
This is what cambium recommends:
https://www.streakwave.com/itemdesc.asp?ic=N00L101A
-Sean
On Mon, Jan 15, 2018 at 10:22 AM Sam Lambie wrote:
> Hey all, I am looking for a single power supply that can handle the load
> for 4 - 450m's
>
> The specs from one power
Meanwell SDR 48-120 work fine for 450i and 450 AP, but the Medusa is a
whole other animal in terms of power. At idle, they take 46.3 watts each.
On Mon, Jan 15, 2018 at 10:52 AM, Jaime Solorza
wrote:
> Hey SamI remember you mentioned you purchased some industrial
100W power supply? I assume they're budgeting for absolute worst case.
Like 500' POE only and fiber?
Maybe a Traco TSP600-148 to run all four?
Or... Forrest showed the RackInjector with "Cambium Sync" cards powered
via -48 (I assume some kind of telco rectifier).
On 1/15/2018 11:22 AM, Sam
Hey SamI remember you mentioned you purchased some industrial power
supplies while back..how did they work for you?
Jaime Solorza
On Jan 15, 2018 10:22 AM, "Sam Lambie" wrote:
> Hey all, I am looking for a single power supply that can handle the load
> for 4 - 450m's