On Fri, 7 Jun 2002, [iso-8859-1] Ville Syrjälä wrote:
> On Thu, Jun 06, 2002 at 09:20:31PM -0400, Paul Davis wrote:
> > >The problem with GUS synth is that it uses non-interleaved data layout so
> > >it's not relly useful for pcm stuff. alsa-lib doesn't want to do
> > >the required conversion for
I am blown away by the specs of the LynxTWO card so I asked
them directly if they had any Linux driver support and am
pleasantly surprised they are at least cooperating with the
OSS folks. I am wondering if anyone is looking at ALSA support ?
--markc
-
On Mon, 10 Jun 2002, Takashi Iwai wrote:
> i talked (yes, physically!) with Jaroslav about this issue.
> our conclusion is to extend the snd_pcm_hw_constraints_t struct,
> namely, using char arrays instead of int for mask bits.
you mean represent each mask bit with separate ascii character?
-Dan
hi !
in reply to a posting by juan linietsky, Paul Davis wrote:
>
[allowing multiple apps to play at the same time (esound-style) on
hardware that does not support multi-open]
>
> * ALSA already has the "share" PCM device type which allows
> multiple access to the same underlying hardware
[cc:ing alsa-dev and lau]
Richard Guenther wrote:
>
> Hi!
>
> I'd like to create a virtual 2-(stereo)-channel alsa device from one
> ISA SB AWE and one on-board VIA alsa device. Has anyone figured out
> how to do this using .asoundrc magic? [I know Jaroslav knows and told
> Joern, but I think t
At Tue, 4 Jun 2002 13:55:54 -0700 (PDT),
Dan Hollis wrote:
>
> On Tue, 4 Jun 2002, Takashi Iwai wrote:
> > > Of course you will want a good API support structure for handling format
> > > conversions...
> > hmm, i don't think it must be a struct. enum (int) could have enough
> > values if it's
Hi,
At Wed, 05 Jun 2002 09:26:46 +0200,
Kristof Pelckmans wrote:
>
> As I understand, all Delta cards are supported that have the Envy24
> chipset.
not all but most of them.
> Is this also true for the Delta 410 ? Does anyone have any
> experience using this card under Linux ?
it's not suppo
At Tue, 4 Jun 2002 23:42:53 +0200,
Martin Langer wrote:
>
>
> Hi,
>
> I try to write some adat support for the Digi32/8, but I am not familiar with
> adat up to now... and I don't have this adat model, but the driver should be
> very similar to the rme96 one...
>
> I know that the Digi96 has j
At Tue, 4 Jun 2002 23:10:20 +0200 (CEST),
Tim Goetze wrote:
>
> Takashi Iwai wrote:
>
> [...]
>
> >so far, so good..
> >
> >> calling snd_pcm_close() takes a few seconds during which i see
> >> this:
> >>
> >> [~] cat /proc/asound/ice/pcm0p/sub0/status
> >> state: DRAINING
> >> trigger_time:
Hi,
At Thu, 6 Jun 2002 11:03:19 +1200,
Eliot Blennerhassett wrote:
>
> (It may be possible to release the host side code, but never the DSP code
> on the cards.)
it doesn't matter so much, as long as we have an enough working dsp
binary code and know its usage.
> I think it would be much be
Hi Jack,
At Fri, 7 Jun 2002 21:05:32 -0400 (EDT),
Jack Howarth wrote:
>
>The current alsa-driver, alsa-libs and alsa-utils seem to work
> fine with the snd-powermac driver on my Apple G4 Sawtooth Powermac
> in both alsa and oss compatibility mode. However, there still is
> a conflict with th
At Sat, 08 Jun 2002 00:28:55 +0800,
Lawrence Abbott wrote:
>
> FWIW, Ive had a problem with Envy24 control not showing all the audio
> routing options under the patchbay/router tab (H/W outs 1 to 8 not
> shown). I found that adding a couple of lines to
> alsa-driver-0.9.0rc1/alsa-kernel/pci/
At Sat, 8 Jun 2002 18:46:10 +0200 (CEST),
tomasz motylewski wrote:
>
>
> I have seen that alsa-driver-0.9.0rc1 cs4281.c driver supports only 2 periods.
>
> There exists an unofficial patch for alsa-driver-0.5.12a done by
> [EMAIL PROTECTED] I have seen that some parts of it are included in
> 0.
13 matches
Mail list logo
