>From: p z <[EMAIL PROTECTED]>
>
>>2. Alsamixer shows obscure names
>You could rename it in alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
>and send patch here.
I dislike patches, but I include one below if you insist.
Just don't apply the patch to the latest Alsa, because I have
alsa-driver-1.0
Hello.
A couple of question on emu10k1 driver (e.g., in SB Live):
1. Sample rate conversion
What exactly happens when I record at sample rate 44100 Hz?
Does emu10k1 chip run at sample rate 44100 Hz as well?
(It is claimed that emu10k1 runs only at rate 48000 Hz.)
If emu10k1 runs at 48000 Hz, at
Hello. The case is closed!
Both LiveDrive MIDI and InfraRed remote started working by
following change in modules.conf:
old: enable_ir
new: enable_ir=1
Now that I know it the fix seems to be obvious, but in my mail
archives both versions are used.
The Alsa documentation, of course, could be
>From: Eckhard Jokisch <[EMAIL PROTECTED]>
>>
>> Now we should look at why LiveDrive "midi-in" does not work.
>
>As far as I remeber it worked half a year ago.. no?
Another person with LiveDrive said it does work, but
it does not work for me. The port works in MS Windows with
the driver: SB Live!
>From: Juhana Sadeharju <[EMAIL PROTECTED]>
>
> Line2/Mic2 LiveDrive: 100
> Line2/Mic2 LiveDrive Capture: 100
> Aux2 LiveDrive: 0
> Aux2 LiveDrive Capture: 0
I noticed that Peter Zubaj already provided the patch a few days ago.
But, could those names appearing in
Hello. Good news: LiveDrive line-in2 capture is working!
Earlier I could record only via AC97 Capture which apparently
is the wrong way.
As instructed by Peter Zubaj I changed
alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
in the following way (with 1.0.0pre3 driver):
"Line LiveDrive Playback Vol
Hello. What is the latest status of Creative/emu10k1 support?
I have Alsa driver where the LiveDrive Line-In2 ("Line LiveDrive 1")
on capture bus does not work. We checked the case with Alsa developers
but the problem remained. A quick look at the Alsa-Devel archives
reveals that others have had t
Hello. Nobody replied to this question:
What internal sample rate the emu10k1 is using when arecord
uses 44100 Hz sampling rate? Someone of you claimed emu10k1
uses 48000 Hz as internal sampling rate. Then does Alsa driver
do any sample rate conversion between 44100 Hz and 48000 Hz?
The site op
On the SB Live problems: recorded signal levels differs from MS Windows
driver, and the capture faders of alsamixer seems to do nothing.
I posted this to alsa-user as well if there are people who has
the SB Live card. Please join us for testing.
If I start to understand how the SB Live driver wor
Hello. There is something odd going on with emu10k/SB Live driver.
I have drivers version 0.90rc1.
First, the capture faders and switches seems to not work as
one could figure out by reading the "SB-Live-mixer.txt".
Second, after unintuitively capturing the Drive/line-in2, the
signal levels diffe
Can somebody put a html/attachment etc. filter for this list?
Similar to what is being added to linux-audio-dev. It should
remove the spams.
Juhana
___
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
>Here's the latest.
>
>http://www.boosthardware.com/LAU/alsa/index5-pd.html
I liked better the version which had the explanation of the
project. What were its problems? I.e., why it was taken off?
This new page is too wide. Could the title be broken to two lines?
Then title's height would match
>From: Patrick Shirkey <[EMAIL PROTECTED]>
>
>http://www.boosthardware.com/LAU/alsa/index4-pd.html
Please ignore my previous mail, posted minute ago.
It looks like my help is not needed at all...
Juhana
___
Alsa-devel mailing list
[EMAIL PROTECTED]
ht
>From: Jaroslav Kysela <[EMAIL PROTECTED]>
>
>> I think that simply for working on this, Patrick should be made
>> webmaster for alsa-project.org. The simple fact that he has bothered
>
>It's fine with me. I offered write access to WWW tree to him a few days
>ago.
Great. Just let me know when I
>From: Takashi Iwai <[EMAIL PROTECTED]>
>
>Hmm, on what stand point was this list created?
>from the users side, Press and Vendor Calls are not so interesting.
Yes, if Alsa stays as a private corner for Alsa developers and
existing audio developers. But it is total turnoff for vendors and
new au
Both www.gtk.org and www.gimp.org looks good to me. Please check
them.
Sure everyone wants to read the news and the latest development
but it doesn't have to be in the front page. A short "latest releases:
stable 0.9, devel 0.99a" would do fine but not an extensive list.
Think about it. Could Le
Hello. I found out that the current www.alsa-project.org pages
are not as good as they should be. They are next to nothing
for non-developers (such as vendors) who yet don't know what
Alsa is. Information is in wrong importantness order, and there
actually is not a clear explanation what is the Al
17 matches
Mail list logo
