I'm also having problems with the hdsp driver, however, I can get my
multiface + PCMCIA card working just fine so long as I boot XP first. XP
will load the firmware and when I reboot into linux and do a modprobe
snd-hdsp, it loads up just fine and states that the firmware has
already been
SNIP
Xilinx Corporation RME Hammerfall DSP (rev 0b)
0b hexadecimal == 11 decimal
so, you have revision 11 firmware...
This looks like the problem I'm having that didn't go away by
downgrading the firmware. Then again, I'm using the cardbus interface.
Anyway, rev 10 firmware gets loaded
On Tuesday 03 June 2003 01:46, [EMAIL PROTECTED] wrote:
lspci -vvv output is attached.
I bought the hdsp and multiface recently. It might have the dreaded
version 11 firmware.
Xilinx Corporation RME Hammerfall DSP (rev 0b)
0b hexadecimal == 11 decimal
so, you have revision 11 firmware...
