Hallo,
Takashi Iwai hat gesagt: // Takashi Iwai wrote:
> At Tue, 23 Mar 2004 22:42:05 +0100,
> Frank Barknecht wrote:
> > mlockall(MCL_CURRENT|MCL_FUTURE)= 0
> > sched_get_priority_max(0x1) = 99
> > sched_setscheduler(0, 0x1, 0xbfffe254) = 0
> > open("/dev/midi0", O_RDWR)
At Tue, 23 Mar 2004 22:42:05 +0100,
Frank Barknecht wrote:
>
> Hallo,
> Paul Davis hat gesagt: // Paul Davis wrote:
>
> > >$ measure -p ./out/x11.png -o ./out/x11.out -c 0 -f 1024 -n 2 -t 2
> > >I get this error message: "error setting freq 1024"
> >
> > probably a permissions problem. try it as
On Wed, 24 Mar 2004, Jaroslav Kysela wrote:
> > $ measure -p ./out/x11.png -o ./out/x11.out -c 0 -f 1024 -n 2 -t 2
> > I get this error message: "error setting freq 1024"
>
> Frequency should be equal or greater than 5000Hz.
Sorry, it appears to be the rtc frequency, of course. I was referring t
On Tue, 23 Mar 2004, Frank Barknecht wrote:
> Hallo,
>
> I'd like to test my system's 2.6.4 latency using Takashi's
> http://www.alsa-project.org/~iwai/latencytest-0.5.2.tar.gz
> suite.
>
> Building and installing so far went fine, I can run all the tests but
> no output is created. But I get a
> > >$ measure -p ./out/x11.png -o ./out/x11.out -c 0 -f 1024 -n 2 -t 2
> > >I get this error message: "error setting freq 1024"
> >
> > probably a permissions problem. try it as root.
>
> This is while runng at root. (Sorry for the "$" I typed that one by
> hand).
>
> A tip from Tim Goetze to
Hallo,
Paul Davis hat gesagt: // Paul Davis wrote:
> >$ measure -p ./out/x11.png -o ./out/x11.out -c 0 -f 1024 -n 2 -t 2
> >I get this error message: "error setting freq 1024"
>
> probably a permissions problem. try it as root.
This is while runng at root. (Sorry for the "$" I typed that one by
>$ measure -p ./out/x11.png -o ./out/x11.out -c 0 -f 1024 -n 2 -t 2
>I get this error message: "error setting freq 1024"
probably a permissions problem. try it as root.
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutor
