At Thu, 02 Jan 2003 10:40:56 +0100,
Benny Sjostrand wrote:
>
> >
> >
> >Actually the drive that I use to send sound to the rears speakers is
> >"h:0,1" not "h:1,0". That's because the rear speakers controller is just
> >a subdevice of my first and only sound card. That works with no problems
> >se
>Let's suppose this playing is going on and a new fresh input arrives on my
>input channel. So I would think the hardware will run in master mode and the
>software will say: slave mode. I'm really not happy about this solution. I
>would prefer a solution with precise modes or error messages if neca
At Mon, 6 Jan 2003 14:37:08 +0100 (CET),
Jaroslav wrote:
>
> On Mon, 6 Jan 2003, Janek Hiis wrote:
>
> > Hi,
> >
> > just updated the CVS version and when compiling I get error. Following
> > patch (hopefully correct) fixes that:
>
> I put slightly different fix to CVS, but thanks for notice.
At 27 Dec 2002 14:56:22 -0800,
Mark Knecht wrote:
>
> No, just standard Intel hardware...
well, then you have an exotic one :)
could you show /etc/asound.state?
perhaps the card lacks of some mixer controls which are required.
thanks,
Takashi
At Thu, 2 Jan 2003 22:22:34 -0600,
Troy Benjegerdes wrote:
>
> I have a mac G4 (running debian testing), a ymfpci card (MaxiSound
> Fortissimo) with optical TOSlink out, and a yamaha HTR-5540 receiver with
> digital optical TOSlink input.
>
> I'm trying to get xine or some other DVD player to out
Hi,
if someone has a Trident 4DNX (not DX), could you test the latest CVS
driver? i hope my last change doesn't break, but i couldn't test the
board atm...
thanks in advance,
Takashi
---
This SF.NET email is sponsored by:
SourceForge Enterp
Hi,
are there anyone having SEK'D Prodif Plus soundcards for tests?
i fixed the driver on cvs but it has been done without hardware, and
of course untested.
any reports appreciated.
thanks,
Takashi
---
This SF.NET email is sponsored by:
Sou
Hi,
i committed the documents for alsa-driver API on alsa-kernel tree CVS,
including the API reference generated from the driver source and my
tutorial document. both are in the docbook/sgml format.
the files are found in alsa-kernel/Documentation/DocBook and
you can get html, pdf and ps files b
At Mon, 06 Jan 2003 11:28:41 -0500,
Paul Davis wrote:
>
> >1) offer all available sample rates in open() or reduce them as suggested
> > by Anders
> >2) in trigger(START)
> > - check if current sample rate match with hw_params - if not - fail
> >3) in interrupt callback
> > - same job as tri
On Tue, 7 Jan 2003 19:33:19 +
James Tappin <[EMAIL PROTECTED]> wrote:
> On Tue, 07 Jan 2003 17:04:47 +0100
> Takashi Iwai <[EMAIL PROTECTED]> wrote:
>
> > Hi,
> >
> > if someone has a Trident 4DNX (not DX), could you test the latest CVS
> > driver? i hope my last change doesn't break, but i
On Tue, 07 Jan 2003 17:04:47 +0100
Takashi Iwai <[EMAIL PROTECTED]> wrote:
> Hi,
>
> if someone has a Trident 4DNX (not DX), could you test the latest CVS
> driver? i hope my last change doesn't break, but i couldn't test the
> board atm...
>
>
> thanks in advance,
>
> Takashi
Hi Takashi.
I
On Tue, 07 Jan 2003 17:04:47 +0100
Takashi Iwai <[EMAIL PROTECTED]> wrote:
> Hi,
>
> if someone has a Trident 4DNX (not DX), could you test the latest CVS
> driver? i hope my last change doesn't break, but i couldn't test the
> board atm...
>
>
Hi Takashi,
I've managed to resolve my u
Takashi-san,
I am attaching my current asound.state file. The installed card is an
RME HDSP 9652, their new card. My current modules.conf looks like:
alias parport_lowlevel parport_pc
alias eth0 eepro100
alias usb-controller usb-uhci
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# ---
Hi,
I am using the snd-intel8x0 drivers (0.9.0rc6) on my IBM Thinkpad
running Linux 2.4.20. Everything seems to run fine until the machine
goes through a suspend/resume cycle when mono files/streams seem to get
played back at a much faster rate.
A cold reboot resolves the problem.
Any ideas o
Yes I was able to play surround sound for first time. Very exciting.
Thank you for the good work pushing the penguin army to a more enjoyable
experience with Linux.
Sincerely,
Miguel
On Tue, 2003-01-07 at 01:58, Takashi Iwai wrote:
At Thu, 02 Jan 2003 10:40:56 +0100,
Benny Sjostrand wrot
On Tue, Jan 07, 2003 at 05:02:53PM +0100, Takashi Iwai wrote:
> At Thu, 2 Jan 2003 22:22:34 -0600,
> Troy Benjegerdes wrote:
> >
> > I have a mac G4 (running debian testing), a ymfpci card (MaxiSound
> > Fortissimo) with optical TOSlink out, and a yamaha HTR-5540 receiver with
> > digital optical
On Mon, Jan 06, 2003 at 06:52:29PM +0100, Jaroslav Kysela wrote:
> On Mon, 6 Jan 2003, Anders Torger wrote:
>
> > On Monday 06 January 2003 18.23, Jaroslav Kysela wrote:
> > > On Mon, 6 Jan 2003, Martin Langer wrote:
> > > >
> > > > If the card is in slave mode without an input signal and I'm
> >
17 matches
Mail list logo
