On Tue, Jun 10, 2003 at 01:02:57PM -0700, Mark Knecht wrote:
I'm sure that it will get worked out. I think Joshua is currently having
some good successes with the HDSP 9652,
Yes, it works.
and I'm currently learning how to
modify a Gentoo ebuild to accomplish doing a patch. I also have
tom burkart wrote:
On May 19, Clemens Ladisch wrote:
I upgraded to ALSA 0.9.3a from 0.9.2 and am getting a kernel oops upon
This is a bug in 0.9.3, it has been fixed on CVS.
My Toshiba Tecra (uses YMF-744B) still does not work under 0.9.4(rel)
Is there still an oops?
Regards,
Clemens
Today, Clemens Ladisch wrote:
My Toshiba Tecra (uses YMF-744B) still does not work under 0.9.4(rel)
Is there still an oops?
Sorry, no oops, but doesn't work properly either.
tom.
Consultant
AUSSECPhone: 61 4 1768 2202
339 Blaxland Rd., Ryde NSW 2112
Email: [EMAIL PROTECTED]
On 10 Jun 2003, Ray Heasman wrote:
Hi,
The ALSA YMF-754 SPDIF support is incomplete in a way that ensures that
AC-3 streams can not be decoded by standards compliant receivers. Very
forgiving receivers will render the AC-3, but they are being kind.
According to the standard, they should
tom burkart wrote:
Today, Clemens Ladisch wrote:
My Toshiba Tecra (uses YMF-744B) still does not work under 0.9.4(rel)
Is there still an oops?
Sorry, no oops, but doesn't work properly either.
What, exactly, does doesn't work properly mean? It doesn't compile?
modprobe snd-ymfpci fails?
Hi All,
Can anyone tell me how to
test alsa-lib APIs. If there is any documentation available please let
me know.
thanks,
-Sundaranathan
SIP Technologies Exports Ltd
--
"Live as if to die tomorrow. Learn as if to live forever."
On Mon, 2003-06-09 at 19:23, Martin Langer wrote:
On Fri, Jun 06, 2003 at 12:06:33PM +0200, Gorm David Lai wrote:
On Thu, 2003-06-05 at 21:03, Martin Langer wrote:
On Thu, Jun 05, 2003 at 12:17:32PM +0200, Gorm David Lai wrote:
We have recently bought a RME Digi96/8 card. This
Today, Clemens Ladisch wrote:
What, exactly, does doesn't work properly mean? It doesn't compile?
modprobe snd-ymfpci fails? Error messages in /var/log/messages?
aplay something.wav crashes? The computer explodes? Green demons
coming out of your speakers?
:-) oops. Sorry about the
I also have problems with aplay. Maybe this is related?
The following command:
aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav
Which gives the following output:
Playing WAVE '/users/lai/cavi/sound/01/01 Track 1.wav' : Signed 16 bit
Little Endian, Rate 44100 Hz, Stereo
aplay:
Ok. Sorry for spamming the list, but I got a hint that may point to
somewhere where someone can help me.
If I use aplay with plughw:0,1 as opposed to hw:0,1 aplay acts as if it
is playing, but no sound reaches the digital mixing console, though it
still seems to sync to the signal. This seems to
Test this:
aplay -D hw:0,1 -r 44100 -f S16_LE -c 8 /dev/zero
it should work. It works on my card.
The problem in your
aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav
is that aplay seems to ignore your -c 8, and reads the wav header
instead, and sets it to stereo, as you can see in
Thanks for the advice, though it still doesn't work.
It seems to play, and sets the right sync on the mixing console. The
console just doesn't get any input.
Do I have to unmute the card anywhere?
/Gorm
On Wed, 2003-06-11 at 15:48, Anders Torger wrote:
Test this:
aplay -D hw:0,1 -r 44100
so I think
I'm almost set to be able to try this stuff out again.
For what it's worth, i had problems with alsa 0.9.4 SMP. i think
there are some spinlock changes that aren't very well debugged yet.
On the other hand, alsa 0.9rc7 seems fairly stable. i've gotten
some lockups, but i've
On Wednesday 11 June 2003 16.03, Gorm David Lai wrote:
Thanks for the advice, though it still doesn't work.
It seems to play, and sets the right sync on the mixing console. The
console just doesn't get any input.
Do I have to unmute the card anywhere?
Note that my example uses /dev/zero (zero
On 11-Jun-2003 Sundaranathan S wrote:
Hi All,
Can anyone tell me how to test alsa-lib APIs. If there is any
documentation available please let me know.
Yes, the official documentation is here:
http://www.alsa-project.org/documentation.php3
Bye.
My card which can enter a low power state. It turns
off some components but it leaves the PCI bus interface
active. To bring the card back to life it has to be
reinitialized from scratch. What D state is it ? PCI
power management papers say that already in D1 state
i/o space is disabled. I'm a
Hi all,
I modified the code in amixer.c for my own use. Instead of being a command
line utility that ends after every mixer access, I have it as a function
call from a larger program. I also cut it down quite a bit so that I am
only using sset for Master and PCM.
The problem that I am
Anyone care to shed the light on the math for what totalmix does
regarding fader-to-mixer, fader-to-db and mixer-to-fader values? What I
have works, but it's UGLY. (well just the constants... I like things to
be simple.)
d!
On Wed, 2003-06-11 at 00:48, tom burkart wrote:
Today, Paul Davis
Anyone care to shed the light on the math for what totalmix does
regarding fader-to-mixer, fader-to-db and mixer-to-fader values? What I
have works, but it's UGLY. (well just the constants... I like things to
be simple.)
you could use the settings in ardour, which has relatively
sophisticated
Dear ALSA developers,
Here is a message from ESS regarding getting some information for the
ESS1988/Allegro-1 series cards in order to get better support for them in
linux. I hope that some others will help me badger the ESS people in order to
(A) release info needed to make the Linux driver
The error is as follows; I've tried to move a couple locks around but I
can't figure it out.
--8
bad: scheduling while atomic!
Call Trace:
[c0116c26] schedule+0x3a6/0x3b0
[c0121eda] schedule_timeout+0x5a/0xb0
[c0121e70] process_timeout+0x0/0x10
On Tue, 10 Jun 2003, Paul Davis wrote:
Like you I think the HDSP driver understands my firmware revision. I have
also downgraded and upgraded my firmware without success.
This whole Alsa/HDSP thing is amazingly weird...
at the moment, i regret that we made the move to user-space loading of
22 matches
Mail list logo
