Is this card being actively maintained? I've seen several reports of
problems with this card (occasional metallic sound when recording,
SPDIF passthrough not working on some receivers, etc.) but haven't seen
any responses about possible solutions.
I wish I could volunteer to improve the driver
Hi Takashi,
Takashi Iwai [EMAIL PROTECTED] writes:
Your right this sympton may be specific for the cs46xx, I've
been experiencing this sympton with JACK and Ardour several
times.
The sample rate should not matter. My guess is that internal buffers
occasionally get unsynchronized inside
Hi Takashi,
This is from a thread about two weeks old. Didn't respond before because
was trying the suggestion you provided (see below.)
Takashi Iwai [EMAIL PROTECTED] writes:
then it sounds like the specific problem for cs46xx driver.
That's a possibility, although I don't have another card
Hello,
Paul Davis [EMAIL PROTECTED] writes:
its almost certainly a software problem in mythTV and gnome sound
recorder. i've written code that does this several times - every time
it takes me ages to figure out why, and then i can never remember when
i do it the next time. its related to
Hello,
Wilfried Weissmann [EMAIL PROTECTED] writes:
i also have the same problem with speakfreely with my cs46xx.
I'm sorry for you but am happy at the same time that I am not the only
one experiencing this.
it does not look like the metallic sound is triggered by any specific
event (load,
Hello,
I am trying to troubleshoot a very annoying problem I have with a Santa
Cruz Turtle Beach (cs46xx). Sometimes, when recording, the recorded
sound is very metallic. If when I get the metallic sound I run alsamixer
and toggle the capture facility of the ADC on and off, sound is fixed
and
Hi Takashi,
Takashi Iwai [EMAIL PROTECTED] writes:
At Mon, 3 Feb 2003 13:17:37 +0100,
Richard Olsson wrote:
On Mon, 03 Feb 2003 12:21:33 +0100
Takashi Iwai [EMAIL PROTECTED] wrote:
could you try the latest cvs version?
i just changed a little the code.
hopefully this works
Hi!
My Santa Cruz is not working with RC7 either, but in my case I
get no sound at all. I've traced the problem to changes that took
place in CVS between 1/21 and 1/22, probably to cs46xx_lib.c. See
http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg06092.html
for the details.
Hi!
My Turtle Beach Santa Cruz card is not working with current CVS code. I
downloaded several CVS snapshots and was able to trace the problem to
changes that happened between the 2003-01-21.tar.bz2 and
2003-01-22.tar.bz2 snapshots (probably in cs46xx_lib.c). So, if I want
to use my Santa Cruz I
I am getting this message when I load the cs46xx module:
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:468: cs46xx: failure waiting for FIFO
command to complete
I think it does not happen when I boot the machine, i.e. the first time
the card is initialized. It seems to happen only after the
10 matches
Mail list logo