From: p z [EMAIL PROTECTED]
2. Alsamixer shows obscure names
You could rename it in alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
and send patch here.
I dislike patches, but I include one below if you insist.
Just don't apply the patch to the latest Alsa, because I have
alsa-driver-1.0.0pre3.
Hello. The case is closed!
Both LiveDrive MIDI and InfraRed remote started working by
following change in modules.conf:
old: enable_ir
new: enable_ir=1
Now that I know it the fix seems to be obvious, but in my mail
archives both versions are used.
The Alsa documentation, of course, could be
From: Eckhard Jokisch [EMAIL PROTECTED]
Now we should look at why LiveDrive midi-in does not work.
As far as I remeber it worked half a year ago.. no?
Another person with LiveDrive said it does work, but
it does not work for me. The port works in MS Windows with
the driver: SB Live! Midi In
From: Juhana Sadeharju [EMAIL PROTECTED]
Line2/Mic2 LiveDrive: 100 rec
Line2/Mic2 LiveDrive Capture: 100
Aux2 LiveDrive: 0 no rec
Aux2 LiveDrive Capture: 0
I noticed that Peter Zubaj already provided the patch a few days ago.
But, could those names appearing in Alsamixer be changed
Hello. Good news: LiveDrive line-in2 capture is working!
Earlier I could record only via AC97 Capture which apparently
is the wrong way.
As instructed by Peter Zubaj I changed
alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
in the following way (with 1.0.0pre3 driver):
Line LiveDrive Playback
Hello. What is the latest status of Creative/emu10k1 support?
I have Alsa driver where the LiveDrive Line-In2 (Line LiveDrive 1)
on capture bus does not work. We checked the case with Alsa developers
but the problem remained. A quick look at the Alsa-Devel archives
reveals that others have had
On the SB Live problems: recorded signal levels differs from MS Windows
driver, and the capture faders of alsamixer seems to do nothing.
I posted this to alsa-user as well if there are people who has
the SB Live card. Please join us for testing.
If I start to understand how the SB Live driver
Hello. There is something odd going on with emu10k/SB Live driver.
I have drivers version 0.90rc1.
First, the capture faders and switches seems to not work as
one could figure out by reading the SB-Live-mixer.txt.
Second, after unintuitively capturing the Drive/line-in2, the
signal levels
Can somebody put a html/attachment etc. filter for this list?
Similar to what is being added to linux-audio-dev. It should
remove the spams.
Juhana
___
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Here's the latest.
http://www.boosthardware.com/LAU/alsa/index5-pd.html
I liked better the version which had the explanation of the
project. What were its problems? I.e., why it was taken off?
This new page is too wide. Could the title be broken to two lines?
Then title's height would match
From: Patrick Shirkey [EMAIL PROTECTED]
http://www.boosthardware.com/LAU/alsa/index4-pd.html
Please ignore my previous mail, posted minute ago.
It looks like my help is not needed at all...
Juhana
___
Alsa-devel mailing list
[EMAIL PROTECTED]
Both www.gtk.org and www.gimp.org looks good to me. Please check
them.
Sure everyone wants to read the news and the latest development
but it doesn't have to be in the front page. A short latest releases:
stable 0.9, devel 0.99a would do fine but not an extensive list.
Think about it. Could
From: Takashi Iwai [EMAIL PROTECTED]
Hmm, on what stand point was this list created?
from the users side, Press and Vendor Calls are not so interesting.
Yes, if Alsa stays as a private corner for Alsa developers and
existing audio developers. But it is total turnoff for vendors and
new audio
Hello. I found out that the current www.alsa-project.org pages
are not as good as they should be. They are next to nothing
for non-developers (such as vendors) who yet don't know what
Alsa is. Information is in wrong importantness order, and there
actually is not a clear explanation what is the
14 matches
Mail list logo
