On Friday 24 October 2003 15:18, Takashi Iwai wrote:
At Thu, 23 Oct 2003 15:01:50 -0400,
Eloy A. Paris wrote:
Hello,
Wilfried Weissmann [EMAIL PROTECTED] writes:
i also have the same problem with speakfreely with my cs46xx.
I'm sorry for you but am happy at the same time that I am
At Thu, 06 Nov 2003 23:11:21 +0100,
Benny Sjostrand wrote:
then it sounds like the specific problem for cs46xx driver.
i guess some drift occured during the sample rate conversion or so.
please check whether the same symptom happens on 48000Hz ?
Sorry that I've been lost from the
Hi Takashi,
Takashi Iwai [EMAIL PROTECTED] writes:
Your right this sympton may be specific for the cs46xx, I've
been experiencing this sympton with JACK and Ardour several
times.
The sample rate should not matter. My guess is that internal buffers
occasionally get unsynchronized inside
anyway, it'd be helpful for debugging if someone can reproduce this
certainly under a fixed condition...
Well, about 3 times out of 7 I get the problem, so it's not hard to
reproduce at all. What I'd have to know is where to place the debugging
printk()'s or something like that :(
just wanted
On Wed, 05 Nov 2003 10:08:33 -0500
[EMAIL PROTECTED] (Eloy A. Paris) wrote:
Hi Takashi,
This is from a thread about two weeks old. Didn't respond before
because was trying the suggestion you provided (see below.)
Takashi Iwai [EMAIL PROTECTED] writes:
then it sounds like the specific
Ops! my intention was to send this reply to the alsa-devel list!
/Benny
Original Message
Subject: Re: [Alsa-devel] Occasional metallic sound when recording (cs46xx)
Date: Thu, 06 Nov 2003 23:11:21 +0100
From: Benny Sjostrand [EMAIL PROTECTED]
To: Takashi Iwai [EMAIL PROTECTED
Hi Takashi,
This is from a thread about two weeks old. Didn't respond before because
was trying the suggestion you provided (see below.)
Takashi Iwai [EMAIL PROTECTED] writes:
then it sounds like the specific problem for cs46xx driver.
That's a possibility, although I don't have another card
At Thu, 23 Oct 2003 15:01:50 -0400,
Eloy A. Paris wrote:
Hello,
Wilfried Weissmann [EMAIL PROTECTED] writes:
i also have the same problem with speakfreely with my cs46xx.
I'm sorry for you but am happy at the same time that I am not the only
one experiencing this.
then it sounds
Hello,
Paul Davis [EMAIL PROTECTED] writes:
its almost certainly a software problem in mythTV and gnome sound
recorder. i've written code that does this several times - every time
it takes me ages to figure out why, and then i can never remember when
i do it the next time. its related to
This problem happens randomly but is very annoying, specially if I
program my PVR (MythTV) to automatically record a show - the show can
get recorded with metallic sound, which makes it very hard to understand
during playback.
This is not MythTV-specific since I have been able to reproduce the
Hello,
Wilfried Weissmann [EMAIL PROTECTED] writes:
i also have the same problem with speakfreely with my cs46xx.
I'm sorry for you but am happy at the same time that I am not the only
one experiencing this.
it does not look like the metallic sound is triggered by any specific
event (load,
Hello,
hmm, what makes something sound metallic anyway? echo?
Good question, I wish I knew. I guess I'll try enabling debugging output
in the cs46xx driver. I am particulary interested in knowing what
happens when you toggle capture of the ADC channel in alsamixer.
It could be a stereo
I have the same problem with my Turtle Beach Santa Cruz card (cs46xx).
I haven't used the capture device yet, but the metallic sound happens in
playback, also randomly. For example, in gaim, incoming IM sounds will
be normal, and then all of a sudden, switch to that metallic sound (the
source
On Wed, 2003-10-22 at 09:22, Eloy A. Paris wrote:
Hello,
I am trying to troubleshoot a very annoying problem I have with a Santa
Cruz Turtle Beach (cs46xx). Sometimes, when recording, the recorded
sound is very metallic. If when I get the metallic sound I run alsamixer
and toggle the
Paul Davis wrote:
This problem happens randomly but is very annoying, specially if I
program my PVR (MythTV) to automatically record a show - the show can
get recorded with metallic sound, which makes it very hard to understand
during playback.
This is not MythTV-specific since I have been able to
Hello,
I am trying to troubleshoot a very annoying problem I have with a Santa
Cruz Turtle Beach (cs46xx). Sometimes, when recording, the recorded
sound is very metallic. If when I get the metallic sound I run alsamixer
and toggle the capture facility of the ADC on and off, sound is fixed
and
16 matches
Mail list logo
