Re: [Alsa-user] SB Audigy 2 Value

Gene Heskett wrote: I've been staring at this till its all a blur. And for the time being, the old sblive is going back in in a few seconds. But any help will be gladly appreciated. Please decribe the problem you are having. You just dump loads of config, without describing your problem.

[Alsa-user] Intel High Definition Audio. Front Audio Header Configuration?

Hello Everyone, I am using Intel D915GLVG motherboard with onboard Intel HD Audio. Here is the relevant lspci -vv output. # lspci -vv 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Intel Corporation

[Alsa-user] break of installation

Hello alsa-utils-1.0.9a 'make install' make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsactl' Making install in alsaconf make[1]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf' Making install in po make[2]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf/po' mv: cannot stat

Re: [Alsa-user] break of installation

On Wed, 2006-01-11 at 19:04 +0100, [EMAIL PROTECTED] wrote: Hello alsa-utils-1.0.9a 'make install' make[1]: Leaving directory `/root/alsa-utils-1.0.9a/alsactl' Making install in alsaconf make[1]: Entering directory `/root/alsa-utils-1.0.9a/alsaconf' Making install in po make[2]:

[Alsa-user] AC3 Passthru on YMF744 (fortissimo)

I have not been able to successfully get AC3 passthru to work on this card, Yamaha YMF744 driver, I cant find out directly if its simply not supported or if Im doing something wrong, I can get PCM sound out the optical port without issue. No matter what I try, AC3 Will not pass thru. Alsa

Re: [Alsa-user] AC3 Passthru on YMF744 (fortissimo)

On Wed, 2006-01-11 at 14:30 -0500, Dave wrote: I have not been able to successfully get AC3 passthru to work on this card, Yamaha YMF744 driver, I cant find out directly if its simply not supported or if Im doing something wrong, I can get PCM sound out the optical port without issue. No

Re: [Alsa-user] AC3 Passthru on YMF744 (fortissimo)

I wasnt aware of the iecset utility, but I still wasnt able to have any luck # iecset -c 1 Mode: consumer Data: non-audio Rate: 44100 Hz Copyright: protected Emphasis: none Category: PCM coder Original: original Clock: 1000 ppm Both the audio and non-audio settings produced the same results,

[Alsa-user] Dolby Digital Live?

I have a Bluegears Mystique 7.1 DDL card which, as the name implies, does dobly digital live. How do I enable that in linux? I know how to do s/pdif passthrough, but I prefer the card to do the encoding. The card is cmedia based: [EMAIL PROTECTED] ~]# aplay --list-devices List of PLAYBACK

Re: [Alsa-user] Dolby Digital Live?

On Wed, 2006-01-11 at 23:52 -0500, hondaman wrote: I have a Bluegears Mystique 7.1 DDL card which, as the name implies, does dobly digital live. How do I enable that in linux? I know how to do s/pdif passthrough, but I prefer the card to do the encoding. The card is cmedia based: These cards

Re: [Alsa-user] Dolby Digital Live?

On Wed, 2006-01-11 at 23:52 -0500, hondaman wrote: Bluegears Mystique 7.1 DDL It's impossible to tell from the site whether the encoding is done by the hardware or the Windows driver. Either way, the ALSA driver does not support it, and we don't have the hardware specs that would be needed.