Hello,
I am trying to intall alsa-driver 0.9.6 on a laptop with an ESS1978
Maestro 2E soundcard. I followed instructions on the ESS Technology
maestro-2e page. No problem instaaling alsa-driver and alsa-lib but I
get incorrect modules parameters when I try to insert modules into the
kernel.
dmesg seems to say that ESS Maestro soundcard is not found or busy, but
some lines before it says "Configuring ESS Maestro 2E found at IO 0x1400
IRQ 5". I am a little bit lost.
Some help would be appreciated. Thanks.
Gerard
=============================================================
# modprobe snd-es1968;modprobe snd-pcm-oss;modprobe
snd-mixer-oss;modprobe
snd-seq-oss/lib/modules/2.4.21-0.13mdk/kernel/sound/pci/snd-es1968.o.gz:
init_module: No such device Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.21-0.13mdk/kernel/sound/pci/snd-es1968.o.gz failed
modprobe: insmod snd-es1968 failed
==============================================================
#/bin/dmesg Linux version 2.4.21-0.13mdk ([EMAIL PROTECTED]) (gcc version
3.2.2(Mandrake Linux 9.1 3.2.2-3mdk)) #1 Wed Mar 26 18:03:48 PST 2003
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 -
000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved) BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=win4lin ro root=301 devfs=mount acpi=off
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 597.409 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 126108k/131008k available (1414k kernel code, 4512k reserved,
1119k data, 136k init, 0k highmem) Dentry cache hash table entries:
16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192
(order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0,
4096 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:04.0
PCI: Sharing IRQ 11 with 00:04.1
PCI: Sharing IRQ 11 with 01:00.0
PCI: Cannot allocate resource region 4 of device 00:07.1
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a
16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024
blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DARA-212000, ATA DISK drive
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=1559/240/63,
UDMA(33) Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 107k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:08.0
PCI: Sharing IRQ 5 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Adding Swap: 506480k swap-space (priority -1)
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x45e/0x40) is not claimed by any active
driver. usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 3, frame# 1400
input0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:04.0
PCI: Sharing IRQ 11 with 00:04.1
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 00:04.1
PCI: Sharing IRQ 11 with 00:04.0
PCI: Sharing IRQ 11 with 01:00.0
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
Yenta IRQ list 0698, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
Linux telephony interface
$Id: phonedev.c,v 1.4 2003/03/10 02:56:58 dereks Exp $ $Revision: 1.4 $
Phonedev compiled Sep 2 2003 18:32:17
PCMCIA Version 4.1
Quicknet<6> Internet PhoneCARD<6> version 0002
eth0: NE2000 (DL10019 rev 05): io 0x300, irq 3, hw_addr
00:E0:98:71:63:9B ttyS01 at port 0x02f8 (irq = 3) is a 16550A
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
eth0: found link beat
eth0: autonegotiation complete: 100baseT-FD selected
PCI: Found IRQ 5 for device 00:08.0
PCI: Sharing IRQ 5 with 00:07.2
PCI: Sharing IRQ 5 with 00:10.0
maestro: Configuring ESS Maestro 2E found at IO 0x1400 IRQ 5
maestro: subvendor id: 0x000714c0
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
maestro: version 0.15 time 15:30:11 Mar 14 2003
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
win4lin: mki_version 5, num_cpus 1, pae 0
win4Lin: preempt_enable 0x00000000
ESS Maestro soundcard not found or device busy
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
