On Wed, 2004-04-28 at 06:46, Peter Zubaj wrote:
Hi,
aplay -D hw:0,3 - this newer worked on audigy (only on SB Live)
What you need is - unmute Audigy Analog/Digital Output Jack in
alsa mixer and make sure that no other program is using spdif device.
Hi.
It's definitely unmuted. Since it
Then check if IEC958 Optical Raw Playback Switch is muted.
spdif device works, because it atomatically sets these switches and
they are locked (you can change value in alsamixer, but has no
efect) if spdif device is in use.
Peter Zubaj
http://www.pobox.sk/
IEC958 Optical Raw Playback Switch - it is used for AC3 pasthrough
should be muted - for oss emulation, midi playback, wave playback, ..
alias normal ussage
should be unmuted - for spdif blayback (Raw passthrough of AC3
stream through spdif, unaltered spdif playback) using spdif device.
IEC958
Julian Edwards wrote:
I just upgraded to v1.0.4 of the alsa drivers and I've lost my OSS sound
to the digital output on my Audigy 2. I can't make sense of this:
[EMAIL PROTECTED] ed]$ cat /proc/asound/devices
19: [0- 3]: digital audio playback
$ aplay -D hw:0,3
On Wed, 2004-04-28 at 15:08, Clemens Ladisch wrote:
Probably some mixer control(s) changed.
Yes they had, see the other mails in this thread.
Although, when I restart X (not a reboot, just X itself), the mixer
controls are reset back to the incorrect state. If I do an alsactl
restore it's
Hi,
aplay -D hw:0,3 - this newer worked on audigy (only on SB Live)
What you need is - unmute Audigy Analog/Digital Output Jack in
alsa mixer and make sure that no other program is using spdif device.
Peter Zubaj
== REKLAMA
Java Desktop System