hello
I go back on my problem with the interace Komplete audio 6 from Native
Instruments.
in short the problem is with the snd-usb-audio driver that I don't have any
device capture control and some strange device output.
The release of my card is :
Bus 004 Device 003: ID 17cc:1001 Native
Please show the output of lsusb -v -d 17cc:1000.
Regards,
Clemens
hello,
can I squat on this thread because I bought the same card last week?
the strange affair for me is that the system doesn't show the same
behavior when I turn on the computer with the card or when i plug the card
to say a little more the result of -L aplay is in the file ALSA-KA6.txt
and below the description of the inputs and outputs of the KA6 :
Input :
- 1 and 2 : Line and microphone (XLR or Jack 6.35)
- MIDI in
- 3 and 4 : Jack 6.35 for devices or instruments without phantom power
- output 5 : digital
Chapman wrote:
I am using the ALSA snd_usb_audio kernel driver with my Native Instruments
Komplete Audio 6.
All Audio input levels are low and cannot be seperated from within
pulseaudio, which are all mapped into one. No ALSA mixer controls exist for
the input channels.
Please show the
Hi,
I find it hard to believe that your soundcard offers no control over input
level, or that alsa can't parse the control information from your card.
Try shutting down anything related to pulse audio, and use simple command
line tools like 'amixer' to read or set your controls.
If it still
Hi,
I am using the ALSA snd_usb_audio kernel driver with my Native Instruments
Komplete Audio 6.
All Audio input levels are low and cannot be seperated from within
pulseaudio, which are all mapped into one. No ALSA mixer controls exist for
the input channels.
This is in relation to the
