Re: [altusmetrum] Which gplEDA tools?

script too, I think I missed that. Regards, Kieran > On 10 Aug 2018, at 19:59, Bdale Garbee wrote: > > Kieran Sullivan writes: > >> Oh, and when someone figures out a good way to calibrate the radio on >> the Telemega, please let me know. I’ve been trying to get

Re: [altusmetrum] Which gplEDA tools?

Oh, and when someone figures out a good way to calibrate the radio on the Telemega, please let me know. I’ve been trying to get it right for a couple of years on and off… :-) Kieran > On 10 Aug 2018, at 08:46, Kieran Sullivan wrote: > > Get the gEDA toolsuite installed in Debian

Re: [altusmetrum] Telemetrum V2 antenna pad ripped off board.

Might help a bit. Usually the conformal coating just keeps the corrosion down. If you do decide to conformal coat the board, try not to block the pressure sensor :-) Kieran > On 16 Jun 2017, at 11:13, Scott Myers wrote: > > I've wondered often if having a conformal

Re: [altusmetrum] New Member

I’ll have a go at answering (some of) your questions :-) See inline below. Kieran > On 13 Apr 2017, at 15:22, Scott Myers wrote: > > Thanks Tim for the reply and thanks for the links. I've read all those links > before. I think I have read nearly everything there is to

Re: [altusmetrum] [AD] Altus Metrum reduces MicroPeak to $30 and releases AltOS 1.6.3

Thank you. So glad to see Mac USB support fixed. I'll try it out shortly. Kieran > On 7 May 2016, at 02:11, Keith Packard wrote: > > Altus Metrum reduces MicroPeak to $30 and releases AltOS 1.6.3 > > Altus Metrum announces a new lower price for MicroPeak: $30 > >

[altusmetrum] Altos UI support in Mac OSX El Capitan

Is Altos UI supported on Mac OSX El Capitan? Kieran ___ altusmetrum mailing list altusmetrum@lists.gag.com http://lists.gag.com/mailman/listinfo/altusmetrum

Re: [altusmetrum] Battery care and maintenance

The battery is a single cell LiPo battery with all protection circuitry removed. That means you have to make sure you do not discharge it bellow 3.3V (best not go below 3.6V). The charge circuitry should make sure that the battery does not go above 4.2V while charging either - but that’s

Re: [altusmetrum] How long does it normally take to get GPS lock?

The telemetrum seems to take a very long time to acquire enough satellites to get a position lock, perhaps 15 minutes or so. The telemega installed in the same rocket instead takes only a minute or two at most. I think they use different GPS receivers, so it's not just RFI that makes the