* Chris Marble [EMAIL PROTECTED] (Sat, Feb 17, 2001 at 07:59:17PM -0800)
Gerhard den Hollander wrote:
I noticed when looking through the logs that the *dumper* performance is
around the 1Kps (or less) on my system ,
whereas the *taper* gets a performance of about 7 Kps.
So apparently
Am Freitag, 16. Februar 2001 20:57 schrieben Sie:
root@fileserver:/usr/local/sbin ./amrestore /dev/sg5 king
/dev/sg5 is a changer. The tape device is /dev/nst0, and that's what
amrestore wants.
OK, i will testing at theses day.
Thanks a lot.
Bye Juergen
--
Dies ist eine Microsoft freie
Am Freitag, 16. Februar 2001 20:57 schrieben Sie:
Hi Alexandre!
amreport: mail command failed: /usr/sbin/sendmail -s "Daily AMANDA MAIL
REPORT FOR BogusMonth 0, 0" [EMAIL PROTECTED]
It shouldn't be running sendmail directly. It should be using `Mail',
`mailx' or `mail', as per configure.
0.001 secs
GETTING ESTIMATES...
driver: pid 9119631 executable /usr/prog/amanda/amanda-2.4.2/libexec/driver
version 2.4.2
driver: send-cmd time 0.009 to taper: START-TAPER 20010219
error result for host tnlnx1.eur.dow.com disk /boot: missing estimate
getting estimates took 0.025 secs
FAILED QUEUE
There are now daily spam messages about toner supplies going to the amanda
mailing list. This is a big annoyance. Please do something to prevent such a
thing from happening again. If needed I can provide headers and the emails
that I recieved.
Regards,
Ryan Williams
As a reminder: If you are at a pay-phone, call the 1-800 number they
gave. Tell them you don't LIKE sapm. And walk away knowing that you
cost them $0.35 a minute. (they may have a better rate)
On Mon, 19 Feb 2001, Ryan Williams wrote:
There are now daily spam messages about toner supplies
Hello all,
My experience trying to help some scientists at UNAM is that unam.mx is
a disaster area, therefore this e-mail is a shot in the dark at best.
FYI I am not an admin of amanda-users or the server that hosts it, so
don't complain to me about spam or other problems.
Original
Ryan Williams wrote:
There are now daily spam messages about toner supplies going to the amanda
mailing list. This is a big annoyance. Please do something to prevent such a
thing from happening again. If needed I can provide headers and the emails
that I recieved.
I'm mad about it too, but
I have a couple of machines that are slow and poorly connected to my
tape server. In every instance, I happen to *know* that if these
machines were to appear first in the backup schedule, the backup would
finish more quickly.
Is there a way I can push them to the front?
Ben
There are now daily spam messages about toner supplies going to the
amanda mailing list. This is a big annoyance. Please do something to
prevent such a thing from happening again. If needed I can provide
headers and the emails that I recieved.
your best bet when you see repetative spam
On an Auspex,
SunOS caeauspex 4.1.4 1 AUSPEX-VERSION 1.9.2M1Z2 aushp
When running configure for 2.4.2p1, I get:
checking whether posix fcntl locking works... no
checking whether flock locking works... no
checking whether lockf locking works... no
checking whether lnlock locking works... no
I do not have any experience with majordomo but I know that, with mailman,
it is easy to do. If nothing else there could be a line put into the
sendmail access file that says
REJECT bad.relay.mailserver.mx
or just make shure that the person is subscribed before they can send email
to
Where might I find a list of dumptypes that amanda knows about
by default (like root-tar, nocomp-user, etc)?
It depends on what you mean by "by default". Amanda has some dumptypes
built in, but usually the ones used are explicitly defined in your
amanda.conf, either from the sample file that
saturn:~ # amrecover -C DailySet1 -s saturn -d /dev/nst0
AMRECOVER Version 2.4.1p1. Contacting server on saturn ...
amrecover: Unexpected server end of file
What does "Unexpectes server end.." mean?? Who produces this message??
The message comes from amrecover and means the amindexd server
Hmi didn't give them another name for the Mail.
I compiled amanda with the standard options.
Where can i change the mailname to the original name?
It is built in from what ./configure finds.
You'll have to remove config.cache (or "make distclean") and rerun
./configure to get this reset.
When introducing the Linux system in the scheme, the backup fails in the
planning stage with the following message.
What does "amcheck -cl config" have to say?
Gerrit Hommersom
John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
I have a couple of machines that are slow and poorly connected to my
tape server. In every instance, I happen to *know* that if these
machines were to appear first in the backup schedule, the backup would
finish more quickly.
Is there a way I can push them to the front?
That's harder than you
Here's your answer, hope it's not too much:
It was just what I needed.
In file included from common-src/amflock.c:48,
from configure:19266:
common-src/amanda.h:509: parse error before `areads_dataready'
...
This appears to be caused by someone getting a little too enthusiastic
Ben Elliston wrote:
I have a couple of machines that are slow and poorly connected to my
tape server. In every instance, I happen to *know* that if these
machines were to appear first in the backup schedule, the backup would
finish more quickly.
Can you put in a delay time for all the
Hi !
i have installed amanda 2.4.2 with Debian 2.2 core
2.2.16fix1 in a compaq proliant server
i created the host list, tape labels, volume
indexand configured my changer ( autoloader 7x DAT DDS-3)
all dumps complete successfully but one fails with
the following error :
/--
luisinII / lev
20 matches
Mail list logo
