On Monday 22 July 2002 23:15, Jon LaBadie wrote:
>On Mon, Jul 22, 2002 at 07:06:07PM -0500, Craig Hancock
[EMAIL PROTECTED] wrote:
>> Hello all after playing with amanda all week I have finally
>> gotten into a situation were my entry in disklist file is to
>> big. From what I've read amanda isn'
On Monday 22 July 2002 20:06, [EMAIL PROTECTED]
wrote:
>Hello all after playing with amanda all week I have finally gotten
> into a situation were my entry in disklist file is to big. From
> what I've read amanda isn't smart enough to pick were it left off
> if it ran out of tape it will attempt
On Monday 22 July 2002 19:46, Mark Cooke wrote:
>On Tue, 2002-07-23 at 00:14, Gene Heskett wrote:
> There is also a gentleman here who is quite
>
>> familiar with the rpms, and who will probably chime in with more
>> specific help if the subject line mentions rpms.
>
>LOL :-)
>
>That wouldn't be m
On Mon, Jul 22, 2002 at 07:06:07PM -0500, Craig Hancock [EMAIL PROTECTED]
wrote:
> Hello all after playing with amanda all week I have finally gotten into
> a situation were my entry in disklist file is to big. From what I've read
> amanda isn't smart enough to pick were it left off if it ran out
Hello all after playing with amanda all week I have finally gotten into
a situation were my entry in disklist file is to big. From what I've read
amanda isn't smart enough to pick were it left off if it ran out of tape
it will attempt to start from the begining again. Because of this I was thinkin
On Tue, 2002-07-23 at 00:14, Gene Heskett wrote:
There is also a gentleman here who is quite
> familiar with the rpms, and who will probably chime in with more
> specific help if the subject line mentions rpms.
LOL :-)
That wouldn't be me by any chance?
BTW I just read this and this is what
On Monday 22 July 2002 16:47, Allan Sun wrote:
>Hi all,
>
>I am new to Amanda and have just installed 2.4.2p2-1 on my
> Mandrake 8.2(Kernel 2.4.18) .There is no problem to do a full
> backup (I just did little change on the default setup),but I'm
> not clear how to do daily incremental backup.I ha
Has anyone been able to restore with the amanda-win32 client?
The backup appears to be going well but when I try to restore I am
unable to pull up the index through the amrestore-gui client.
here is the amindexd.debug file
amindexd: debug 1 pid 8506 ruid 28 euid 28 start time Mon Jul 22
15:13:
On Monday 22 July 2002 16:25, Eduardo Ceva wrote:
>Hi, wich command of mt writes to the tape??? thanks a lot!!!
>
>ceva
AFAIK, no command from mt except a rewind (if there is unwritten
data still in the drives buffer) will cause any data to goto the
tape medium.
'mt' is an adjusting tool, and
I do a restore at the end of each month to make sure my archival backups
are doing okay. I've noticed that they've been having a problem the past
couple of months and I'm stumped as to the cause since it used to work just
fine.
Upon issuing the following command:
"amrestore /dev/nst0"
Hi all,
I am new to Amanda and have just installed 2.4.2p2-1 on my Mandrake
8.2(Kernel 2.4.18) .There is no problem to do a full backup (I just did
little change on the default setup),but I'm not clear how to do daily
incremental backup.I have HP DLT VS80 external SCSI tape drive
installed,wh
On Mon, 22 Jul 2002 at 5:25pm, Eduardo Ceva wrote
> Hi, wich command of mt writes to the tape??? thanks a lot!!!
There isn't one, really. mt is for tape and tape drive manipulation.
If you just want to write to a tape, try dump or tar.
--
Joshua Baker-LePain
Department of Biomedical Engineer
As I mentioned in my previous message I'm still having problems with the
glue scripts and making Amanda work on FreeBSD with my HP SureStore 24x6
autoloader.
chg-chio - Works perfectly except for the fact that it doesn't know that
there is a cleaning tape in slot 6 and thus this causes problems.
Hi, wich command of mt writes to the tape??? thanks
a lot!!!
ceva
On Mon, 22 Jul 2002 at 11:25am, Marvin Davenport wrote
> I want to user amanda for a tapeless backup, using a
> server with several DISKS attached. I cannot seem to
> find comprehensive instructions on the best way to do
> so, some say use 2.4.3 but I don't see anything in the
> WHATS.NEW file ab
I want to user amanda for a tapeless backup, using a
server with several DISKS attached. I cannot seem to
find comprehensive instructions on the best way to do
so, some say use 2.4.3 but I don't see anything in the
WHATS.NEW file about tapeless backup. any suggestions?
_
Amanda needs to use the non-rewinding tape device, in your case probably
/dev/nst0. Look for 'tapedev' in your amanda.conf file.
Frank
--On Monday, July 22, 2002 18:27:43 +0100 jane mattley <[EMAIL PROTECTED]> wrote:
> I am new to Amanda and have just installed and configured as per
> installat
You need to specify the tape device that your O/S considers non-rewinding, such
as /dev/st0n - the n usually refers to no rewind.
jane mattley wrote:
> I am new to Amanda and have just installed and configured as per
> installation docs I am trying to label my first tape using the following
> co
On Mon, 2002-07-22 at 18:27, jane mattley wrote:
> I am new to Amanda and have just installed and configured as per
> installation docs I am trying to label my first tape using the following
> command:
>
> amlabel f DailySet1 DailySet11
looking at this you are already labeling tape number 11 (
On Monday 22 July 2002 13:27, jane mattley wrote:
>I am new to Amanda and have just installed and configured as per
>installation docs I am trying to label my first tape using the
> following command:
>
>amlabel f DailySet1 DailySet11
>
>But I get the following message:
>
>rewinding, reading labe
On Mon, 22 Jul 2002 at 6:27pm, jane mattley wrote
> rewinding, reading label, not an amanda tape
> rewinding, writing label DailySet11, checking label
> amlabel: no label found, are you sire /dev/st0 is non-rewinding
>
> My tape device is rewinding but how I specify this in my amanda.conf file?
I am new to Amanda and have just installed and configured as per
installation docs I am trying to label my first tape using the following
command:
amlabel f DailySet1 DailySet11
But I get the following message:
rewinding, reading label, not an amanda tape
rewinding, writing label DailySet11, c
Title: CuoreSPORTIVO ICEO Global Alert: Ferrari FX Unveiled
Dear Member / Enthusiast,
Ferrari has finally released the first studio shots of the new Ferrari FX "Enzo Ferrari" to press authorities. All new photo gallery of the Ferrari FX with all 40
Etkili
ve Masrafsiz Reklam Fýrsatý
http://www.aktuel.org
-Tüm Türkiye'ye
Ulaþýn-
TR Mail Guide v8.0
World M
Hey guys (amanda admin):
use spamcontrol please
Michael Martinez
System Administrator (Contractor)
Information Systems and Technology Management
CSREES - United States Department of Agriculture
(202) 720-6223
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: S
On Monday 22 July 2002 09:50, Du-Wayne Rood wrote:
>I need to run a full backup of all our servers every day
>
>can anyone please tel me what my amanda.conf file should look like
>
>I am currently running 5 backups on a weekly basis
There is a dumptype in amanda.conf called always-full.
--
Chee
I need to run a full backup of all our servers every day
can anyone please tel me what my amanda.conf file should look like
I am currently running 5 backups on a weekly basis
On Sun, Jul 21, 2002 at 07:47:37PM +0100, Mark Cooke wrote:
> On Sun, 2002-07-21 at 19:22, Gene Heskett wrote:
> > In our experience, when the tape is recognized by the drive after
> > being inserted, the drives compression setting is restored to
> > whatever was in effect when the tape was last
28 matches
Mail list logo
