On Wed, Jun 18, 2003 at 02:38:43PM -0500, Steven M. Wilson wrote:
> Jeremy,
>
> That could very well be the problem I'm having since I just tried a df
> on the client system and it ground to a halt trying to located NFS
> mounts. We rely heavily on NFS here so I'll need to figure out how to
>
hi paul thanks for your suggestion
when i connect to the NT server cytopia01 using smbclient and try and
get a file i recieve the same error
smb: \Administration\jill-andrew\jill-andrew\slide presentations\> get
"ppslides complete.ppt"
Call timed out: server did not respond after 2 milliseconds
On Tue, Jun 17, 2003 at 03:23:32PM -0400, Jason Edgecombe wrote:
> Hi all,
>
> I'm trying to figure out why may backups and estimages take so long. I
> have a dual-processor machine with 4GB RAM. / and /boot are two software
> RAID1 drives
I'd check the performance of this software raid.
I no
On Tue, Jun 17, 2003 at 04:04:41PM +0100, Adam Kirby wrote:
>
> Hi All,
>
> I've been using amanda 2.4.1 on Solaris 2.5.1 with a DLT4000 for several
> years without many problems. I've recently upgraded to Solaris 9, amanda
> 2.4.4 and a Sun L280 (6-slot DLT7000). Most of the FS's are VxFS with a
Title: FULL 2002 YAPIMI PORNO VIDEOLAR
FULL
2003 YAPIMI PORNO VIDEOLAR
AMATOR
> OYNAT
>
ANAL
>
OYNAT
>
ASYALI
> OYNAT
>
BUYUK MEME
> OYNAT
>
ZENCI
> OYNAT
Jeremy,
That could very well be the problem I'm having since I just tried a df on
the client system and it ground to a halt trying to located NFS mounts. ?We
rely heavily on NFS here so I'll need to figure out how to get around this
problem in the future. ?Thanks for the info.
Steve
Jeremy L
no, the list was no help. The problem was that the client had nfs-mounted a disk that
was no longer on the net, so anything that iterated over mounts (like df) was hanging.
That is probably why reboot solve it. I don't allow key machines to be nfs clients
anymore.
JLM
-Original Message-
unsubscribe [EMAIL PROTECTED]
Tom, your changer file contents and what chg-zd-mtx is finding are not the same. The
error message and the debug configuration both indicate lastslot is 1. Be sure that
your amanda.conf in the gt-host directory points to the correct changer file. From my
amanda.conf file:
# modified to suppor
> Hi Tom,
>
> Your changer file is not use.
> What is the full path of your changer file?
> What's your changerfile in amanda.conf?
Hi,
It seems i made a silly mistake! Everything was as it should be in
amanda.conf e.g.
runtapes 1 # number of tapes to be used in a single run of
am
Hi Tom,
Your changer file is not use.
What is the full path of your changer file?
What's your changerfile in amanda.conf?
>From the chg-zd-mtx script:
# Now you are ready to set up the variables in the changer configuration
# file.
#
# All variables are in "changerfile".conf where "changerfi
Hi,
NEC autloader with 10 slots and IBM ultrium tape drive.
mtx version 1.2.17
amanda-2.4.4
dmesg -
Vendor: IBM Model: ULTRIUM-TD1 Rev: 1CSG
Type: Sequential-Access ANSI SCSI revision: 03
(scsi0:A:2): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor
12 matches
Mail list logo