Hi
Lets say i have /home/test folder being backed up by amanda
as i have mentioned in the disklist file. Now if i have to
exclude some files(not to backup )from the /home/test folder how do i do
that.
please help
--
Regards,
Kaushal Shriyan
Technical Engineer
Red Hat India Pvt. Ltd.
Tel :
I have two firewire drives to use as the backup media. I want the
data mirrored on the two drives in case one of them happens to fail.
I was able to get a simple file: setup working. Now I am trying to
mix in RAIT to achieve the mirroring effect. It isn't quite working,
though.
Here's what I ha
On Thu, Aug 19, 2004 at 05:33:32AM +0800, Scott Frisbie wrote:
> AMANDA: FILE 20040818 cvs.yadayada.com /etc lev 1 comp"N program /bin/gtar
> To restore,"position tape at start of file and run:
> dd if="bs=32k skip½1"| /bin/gtar -f... -
>
> It looks l
Paul,
Again thanks for the shell script. We ran a brand new tape in the machine and got this
output:
AMANDA: FILE 20040818 cvs.yadayada.com /etc lev 1 comp"N program /bin/gtar
To restore,"position tape at start of file and run:
dd if="bs=32k skip½1"| /bin/g
Two years ago, I wrote here about problems getting Amanda to work through a firewall
using NAT which couldn't be turned-off. I finally gave up in frustration, despite the
helpful advice of the folks here, and set up two separate backup systems, one inside
and outside the firewall. Adding to my f
Our group purchased "Overland Storage Neo 2000 Departmental Tape Library" recently,
it has 26 slots and 2 drives.
How do I configure 2 drives in tape library using Amanda ? What files do I need to
modify ?
Thanks
Grace
The problem isn't amanda, its with dump (and Linus' hate of the program!)
nocomp doesn't make a difference, apart from using more tape to store
the results.
your could make sure you use a 'dump-type' that specifies to use tar
with no issues..with or without compression.
--
Martin Hepworth
Snr S
On Wed, 18 Aug 2004 at 5:48pm, Ranveer Attalia wrote
> Interesting
> We are currently using version 2.4.4 p1. Is the Linux ext3 file type
> supported on a later version of Amanda where I can use the dumptype
> nocomp?
(Folks, please trim your messages).
It's not a question of amanda. Aman
Interesting
We are currently using version 2.4.4 p1. Is the Linux ext3 file type
supported on a later version of Amanda where I can use the dumptype
nocomp?
-Original Message-
From: Christoph Scheeder [mailto:[EMAIL PROTECTED]
Sent: 18 August 2004 12:56
To: Ranveer Attalia
Subject:
On Wednesday 18 August 2004 03:30, Christoph Scheeder wrote:
>Hi,
>i don't recall when it went in, but AFAIK it was 1 subrelease after
>the point where a missing exclude-file began to get treated as an
>error ;-) Perhaps its mentioned somewhere in a changelog.
>Christoph
But then I'd have to a
Scott Frisbie wrote:
I've been trying to run amrestore with the following command and I've
been getting lots of these errors:
amrestore /dev/nst0 SERVER_NAME
amrestore: strange amanda header: "AMANDA: FILE 20040810
SERVER_NAME /etc lev 1 comp"N program /bin/gtar"
amrestore:
KEVIN ZEMBOWER wrote:
I always get this message when I amlabel a brand new tape. I think
it's caused by trying to read an unformatted, unused tape. But, as Paul
says, it can also be caused by trying to read the tape too soon after
inserting it.
Note that you do get an "input/output error" when aml
Hi,
i don't recall when it went in, but AFAIK it was 1 subrelease after
the point where a missing exclude-file began to get treated as an
error ;-) Perhaps its mentioned somewhere in a changelog.
Christoph
Gene Heskett schrieb:
On Tuesday 17 August 2004 04:19, Christoph Scheeder wrote:
Hi,
firs
13 matches
Mail list logo
