Hi,
Still problem see below.
I'm running Solaris 10 sparc witch HP Ultrium LTO 3 drive ( SL48 Tape Library
).
Thanks Gunnar
Applying heuristic check for compression.
Wrote random (uncompressible) data at 7492244.64516129 bytes/sec Wrote fixed
(compressible) data at 35732243.6923077
Hi,
On the Amanada Wiki there is a note on Solaris:
Set ST_MODE_SEL_COMP in st.conf for your device and then use the correct tape
device variant (do not use c and u device)
How can I verify that it is being set - the driver is seen and configured by
the system.
I want to use the driver in a
Gunnarsson, Gunnar wrote:
Hi,
On the Amanada Wiki there is a note on Solaris:
Set ST_MODE_SEL_COMP in st.conf for your device and then use the
correct tape device variant (do not use c and u device)
How can I verify that it is being set - the driver is seen and
configured by the
On Thu, May 20, 2010 at 3:00 AM, Gunnarsson, Gunnar
gunnar.gunnars...@svk.se wrote:
Applying heuristic check for compression.
Wrote random (uncompressible) data at 7492244.64516129 bytes/sec Wrote fixed
(compressible) data at 35732243.6923077 bytes/sec
Compression: enabled
Writing one file
Yes it ran for a quite long time.
I added a print in the script see below. It will run over the night.
-- GG
amtapetype -o length=400g -b 256k -f /dev/rmt/0n
Applying heuristic check for compression.
blocksize = 262144 blocks written = 1770
blocksize = 262144 blocks written = 1770
Wrote
Running Amanda-2.6.1-p2 On Solaris 10 X86
What is this considered an error. I check error status of and amdump and base
on if the amdump finished with our without errors my script does certain
things.
These dumps were to tapes A00161, A00162.
*** A TAPE ERROR OCCURRED: [flush-threshold-dumped
Running amanda 2.6.1/p2 Sun Solaris 10 x86
In my amanda.conf file I have
flush-threshold-dumped100
flush-threshold-scheduled 100
#taperflush0 #archive so I want all data to tape.
taperflush100
autoflush yes
I tried to do a amflush to
